I have a solution for you, but the Sentry Deflector for Demco Kar Kaddy Tow Dollies # DM5950 is designed to fit on the tongue of a Demco Kar Kaddy tow dolly and won't fit on a tow bar like the Demco Excali-bar III # DM9511013. If you've got a Demco tow bar and need a rock deflector you'll need the Sentry Deflector for Demco Tow Bars # DM9523135, which will mount to your tow bar to protect your front end while flat towing.
If you've got a different brand tow bar or tow dolly, let me know... view full answer...
Yes the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2" # 41913 you were looking at is confirmed to fit your 2021 Ram 1500 with the Class III tow bumper.
I included a video of the # 41913 being installed for you to take a look at. view full answer...
Both of the rail kits you mentioned fit both your 2021 Ram 2500 and your Curt A16 slider hitch. The difference is the finish of the rails. The part # C16427-104 is a gloss finish on the rails that install in the bed whereas the part # C16427-204 is a matte finish paint on the rails. view full answer...
The Redarc Tow-Pro Elite # RED44FR is confirmed to fit your 2020 Toyota Highlander XLE.
You will need to add a 7-way connector, but you will first need a 4-way connector. If you do not already have a factory 4-way connector you can install one using # TK99FR.
With a 4-way connector installed you can then install the # ETBC7 which will plug into your 4-way connector and just require a few more connections as shown in the included installation video.
To mount the knob of the # RED44FR... view full answer...
The Reese Elite Series Above-Bed Gooseneck Trailer Hitch - 25,000lbs Item # RP30845 will fit your Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches Item # RP30061. view full answer...
I spoke to Lippert but they were not able to identify the pin box with this information unfortunately. Therefore, the only option to identify the pin box would be through measuring. I have attached an article that shows how this is done. If you can get back with me with measurements of the pin box or the correct model once measured I'd be happy to assist further. The most common model is a 1621 and the correct replacement for this would be the Lippert 1621 5th Wheel Pin Box part # LC1191191 view full answer...
Trunk bike racks that hold 2-3 bikes are limited to 30-35lbs per bike, so for a bike rack that has a higher weight capacity you will need to go with a hitch-mounted carrier. For this, I recommend looking into the SportRack Pathway Deluxe 3 Bike Rack - 1-1/4" and 2" Hitches # SR2703. This is an affordable hanging bike rack that has a weight capacity of 44lbs per bike.
Both of the bike racks mentioned above will likely require you to use an adapter bar such as # SA3040. This adapter bar... view full answer...
The Flint Hill Goods Cargo Carrier # FHG49ZR is designed to be used with the threaded hitch pin that it comes with, so a standard, non-threaded hitch pin won't work.
The threaded pin is used as an ant-rattle mechanism. If you're looking for a bolt with a lock, we have one that will work with this cargo carrier. It's the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers, part # e99047. view full answer...
According to SuperSprings, the # SSR-180-54-1 SumoSprings are a fit for the 35B and 35F Sunstar LX, for your 2N7, you'll want to use # SSR-184-40-1. I'll link you to a product installation video that you might find helpful. view full answer...
I checked with the manufacturer to find the dimensions of the drawers of the UWS Truck Bed Fender Well Toolbox with Drawers # UWS01623.
The toolbox has three drawers, with all three being 15" long and 4-3/8" wide. The only difference between them is the height of the middle drawer (as you can see in the accompanying photo). That draw is 3" tall while the top and bottom drawer are 2" tall. view full answer...
We have previously confirmed with the manufacturer that the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 will only work with a gooseneck ball that is flush to the truck bed. So you will need to use the standard 2-5/16" gooseneck ball on your B&W hitch to use the Recon.
I have added a link to a video review for you to check out as well of the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045. view full answer...
If you don't want to use a vehicle adapter like the Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style # A10-7084VP on your vehicle with a 4-way to adapt it to your trailer's 7-way, then yes, you can splice into your trailer's wiring to add a 4-way if your like.
You can use the trailer side connector you mentioned, the Hopkins Endurance Easy-Pull Harness with 4-Pole Flat Trailer Connector # HM38136.
To splice it you can connect your wires with the Deka Heat Shrink Butt... view full answer...
A fixed fifth wheel hitch is what you are going to need in order to tow your Grand Design with a rotating pin box, the Lippert Turning Point. Rotating pin boxes should not be used with any type of adapter to ensure stability and a solid connection, and not only is the Andersen Ultimate # AM3200 an adapter, but it attaches to standard base rails so you would need to use the Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package # RP30154 to mount it. Additionally, the use... view full answer...
At one point there was a replacement lens for the light on the Lippert Electric Trailer Jack # LC285318, but that part was discontinued by the manufacturer and is no longer available.
If possible, try cleaning it as best you can, and unless it is completely dark, the Replacement LED Light Module for Lippert Electric Trailer Jack # LC226027 will still be effective for you.
Otherwise, you do have the option of replacing your Lippert Jack # LC285318 or going to a new A-frame jack with a... view full answer...
Definitely! The Aluminum Lynx Trailer Wheel # LHSL301 is designed for pretty much any trailer out there. Just be sure that your hubs have a 5 on 4-1/2" bolt pattern and you're good to go!
If you don't already have a tire then I have attached a link to our selection of 15" tires that you can filter through. I personally like the Provider ST205/75R15 Radial Trailer Tire - Load Range D, Item # TR20515D. view full answer...
Yes. You can mount an awning on Yakima Overhaul HD systems like the # Y01151-5855. If you wanted to use the Yakima Slim Shady Awning # Y36VR, that awning will mount using the included clamps to the HD bars on the Overhaul system. If you're wanting to use a Rhino-Rack Batwing Awning # RR33100 you will need to use the T-slot channels on the HD bars to mount the awning on your Overhaul HD system.
You will not need a cargo carrier or platform rack to mount either of these systems. view full answer...
The only option that provides 15,000 gross towing weight capacity is the Curt Class V Receiver Hitch - 1997 Ford F-250 and F-350 Heavy Duty part # C15511 which is designed for the 34" frame but is also a universal fit hitch so there is drilling into the frame required. All of the hitches available for this truck do require some drilling so this is your best option. view full answer...
The # 295-000002 Global Link entry Door Latch is designed to fit doors that are 1-1/4 to 1-1/2 inches thick with cutouts that are 2-1/2 wide to 3-1/2 inches tall or 3 wide to 4 inches tall. It's a direct replacement for Global Link, Bauer, Lippert, Fastec (FIC) or TriMark standard door latches, so if your cutout and door thickness measurements match up and your existing latch is one of the ones mentioned, the # 295-000002 will work for you.
If you disassemble the latch, you might be able... view full answer...
I am happy to help you get a spare tire and wheel for your Aluma 7814ES-A trailer. However, I would need to know the tire size and wheel size to assist you. It looks like you have a 5 bolt wheel. It is most likely a 5 on 4-1/2 wheel. I will need to know the bolt pattern of your particular wheel. If you measure from one hole to the hole adjacent hole and get 2-5/8" the wheel is a 5 on 4-1/2 bolt pattern. I have attached a couple of photos for your reference. If you can let me know the tire... view full answer...
The top channel dimensions of the Aeroblade and Wingbar crossbars are the same so the Thule # XADAPT2 would work with the new rack you have. The wingbars have rubber seals built into the top channels to reduce wind noise but they will still work great with the # XADAPT2 and the BigMount rack you have. view full answer...
Go To Results