Expert Answers about Ram 5500
- Compatibility of Hopkins 7-Way # HM47210 With # 41157 Gooseneck/Fifth Wheel Wiring Harness
- It sure would. The Pigtail of the # HM47210 unplugs from the pigtail, and the # 41157 would plug inline between the pigtail and the 7-way connector as shown in the photo I've edited for you.
If you click the provided link, you can see the # 41157 being installed on a 2011 Ram truck.
view full answer... - Recommended Rollers For A 40' Gooseneck Trailer That Drags When Pulling Into The Driveway
- If you have the space then I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs # UF48-979023. These rollers have an all steel construction and grease zerk fitting to allow you to easily lubricate the roller. I've attached a diagram below displaying the dimensions so you can determine if your trailer has enough height clearance for these rollers.
view full answer... - Availability Of Gooseneck Hitch For 2015 Ram 5500
- I have an option for you, but there is not a custom fit Gooseneck Hitch that is confirmed to fit your 2015 Ram 5500.
I recommend using the Curt Gooseneck Flat Plate # C65500. This plate is universal and it's normally placed on top of the flat bed, above the rear axle. You'll need to drill holes through the plate, truck bed and into the truck frame. The manufacturer recommends using (grade 5) 1/2 inch hardware to install the plate.
Note that underbed reinforcement is required to reach...
view full answer... - Will Lippert Ground Control TT LC672136 Fit A 2018 Rockwood Mini Lite 2506S?
- Since the GVWR of your 2018 Rockwood Mini Lite 2506S is under 10000lbs then the Electric Ground Control TT Automatic 5-Point Leveling System # LC672136 you were looking at will fit perfectly.
Using this kit will allow you to quickly and easily level and stabilize your trailer when you get to your campsite without having to manually lower each jack.
I included a video of the # LC672136 for you to take a look at.
view full answer... - Hitch Plate With 2-1/2" Receiver For a 2018 Ram 5500 Cab and Chassis With 34" Frame Width
- For your 2018 Ram 5500 with the 34" frame you will need the Buyers Products Hitch Plate with 2-1/2" Receiver # BP83FR.
The Buyers Products Hitch Plate with 2-1/2" Receiver # 3371809061A is for the Ford Chassis models F350/F450/F550.
view full answer... - Air Suspension Enhancement That Fits 2019 Ram 3500 and 5500
- We have air bag style suspension enhancement that fits your 2019 Ram 5500 with the part # F2404 which will work really well to provide additional support to the factory suspension as needed since you can adjust the air pressure in the bags to increase or decrease support. That said, we don't offer an air suspension system replacement to convert the vehicles to air ride if that's what you were referencing.
Then for the 2019 3500 Ram we have the Air Lift kit part # AL88231 as a confirmed...
view full answer... - Fitment of WeatherTech Front Auto Floor Mats for 2021 Ram 5500
- Yes, the WeatherTech Front Auto Floor Mats, # WT23NB are confirmed to fit the regular cab 2021 Ram 5500.
view full answer... - Recommended Gen-Y Torsion 2-Ball Mount For 2-1/2 Inch Hitch With 9 Inch Rise/Drop
- To answer your question about the optimal ride tongue weight, our ranges are referring to use with the 2-5/16 inch hitch ball while the Gen-Y website does not differentiate, hence the slight difference in ranges. That said, since you mentioned your tongue weight could be in the 1,800 lb range, I recommend going with the higher rated ball mount:
- Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 9" Drop/Rise - 21K # 325-GH-1325
Keep in mind, this is assuming you are using...
view full answer... - Width Of Beacon Light Mount for Buyers Products Kabgard Headache Rack
- The Beacon Light Mount for Buyers Products Kabgard Headache Rack part # 33785142 bracket measures 2.33" wide so you will have no issues mounting it to a 2" square tube.
view full answer... - Best Class V Trailer Hitch Receiver for a Bluebird Bus
- We do have a Class V trailer hitch receiver that will fit the frame rails of your 2009 Bluebird bus, although they are all weld-on applications as there isn't an option for a heavy-duty hitch that is bolt-on. The options are either a 3" drop or a 7" drop:
- 3" Drop: Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15901
- 7" Drop: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V # 41990-07
I have added links to the installation instructions of...
view full answer... - Gooseneck Hitch Option For 2022 Ram 5500 Cab & Chassis
- While there are a couple option for a gooseneck hitch that can work for your 2022 Ram 5500 cab and chassis, the Curt gooseneck is a custom fit for the pick-ups, and there isn't a way it can be made to fit the cab and chassis.
Depending on your Ram's configuration, there are a couple of things you can do, which is add a hitch for a flatbed, or add a hitch plate that gets welded or bolted on.
- B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500
- Buyers...
view full answer... - Dimensions of B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks BWGNRK1500
- The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3050 only fits into the mating B&W Gooseneck hitch installation kit # BWGNRK1500. Your photo appears to show a different product.
If you can find a B&W part number on your setup that will allow me to check further with B&W.
I did measure the part # BWGNRK1500 for you since it is in stock. From the top of the plate to the center of the pin hole is 2-inches; from the top of the plate to the bottom of the shank...
view full answer... - Replacement Hardwire Brake Controller Adapter For Prodigy P3
- You'll need to hardwire the Prodigy P3, which means the correct adapter is the Replacement Brake Control Harness # 20127.
If you do not have a factory brake controller on your Ram you will not need to have it flashed; if you are replacing the factory brake controller there is a good chance you will (this is not a one size fits all answer which is why I can't give you a definitive yes).
view full answer... - Compatibility of Lippert LC1565391 Center Point Air Suspension Upgrade with Tandem Lippert 8K Axles
- The Lippert Center Point Air Suspension Upgrade you referenced, part # LC1565391 is compatible with tandem axles up to an 8K capacity, according to Lippert, so the system will work great with your 8K Lippert axles.
I've linked to a video where one of our install crew explains how the air suspension works, as well as to a video showing a typical installation.
view full answer... - 2-1/2 Inch Trailer Hitch Receiver Fit on 2021 Ram 500 Cab & Chassis
- Thank you for the photo, and while there is a 2-1/2 inch trailer hitch receiver that fits your 2021 Ram 5500 cab & chassis, I checked with the manufacturer, and the TorkLift hitch you mentioned will not fit. So for a 2-1/2 inch hitch, you will need to go with a Curt hitch:
- Curt Trailer Hitch Receiver # C15800
This is a Class V hitch that has a massive 2,700 lbs tongue weight capacity and 20,000 lbs towing capacity. I have added a link below to the instructions as well as a video install...
view full answer... - Will the Carr LD Custom Fit Side Steps Fit on a 2018 Ram 5500 Flat Bed Diesel Truck
- I reached out to my contact at Carr and they assured me that the Carr LD Custom Fit Side Steps # CARR117441 will fit on your 2018 Ram 5500 Flat Bed Diesel truck. We do not have an installation video of this product available but they assured me that these are a universal product and will mount anywhere on the frame, near the door, that you can fit them. You will need to drill holes into the frame of your truck in order to mount these steps, since there are no pre-drilled holes on the frames...
view full answer... - 2024 Ram 5500 5th Wheel Gooseneck Recommendation
- The best gooseneck hitch for your 2024 Ram 5500 cab and chassis is the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 which is designed for fabrication applications.
This then allows you to use either the standard B&W Companion # BWRVK3500 or the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch # BWRVK3050 depending on if you'll have a standard bed or a flatbed on your Ram.
view full answer... - 2024 Ram 5500 Cab and Chassis 2-1/2" Trailer Hitch Receiver Options
- We have 2 different 2-1/2" hitch receiver options for your 2024 Ram 5500 Cab and Chassis and the correct one just depends on what you're looking to get out of the hitch.
The Curt # C15800 is your classic hitch receiver while the TorkLift # TL49YR is a dual stacked receiver that gives you both a 2" and a 2-1/2" receiver.
I recommend going with the Curt unless you're going to be towing a trailer and needing to carry a bike rack, or use an in-bed camper and need a special hitch extender...
view full answer... - Fit and Compatibility of Timbren Rear Suspension Enhancement on a 2015 Ram 5500 Cab and Chassis
- I confirmed with Timbren that the # TDR5500 is indeed the correct suspension enhancement spring for your 2015 Ram 5500 Cab and Chassis. The contents of the kit are designed for the stop over the axle as seen in the attached diagram. This kit includes 2 aeon rubber springs. The # TDR5500 can be installed whether you vehicle was equipped with or without factory top overload springs.
What it sounds like you are describing is the upper overload springs. The Torklift # TLA7200 is a good...
view full answer... - Gooseneck Trailer Hitch For a 2012 Dodge Ram 5500
- The B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500 can be welded into your 12' bed on your 2012 Dodge Ram 5500. This universal style gooseneck ball will allow you to have the ball placed where you need it on your bed. This will ensure that you have the necessary trailer clearance for turning. The Turnoverball can be easily flipped inside the hitch for storage and will not interfere with using your bed when needed.
You will be able to use other hitches...
view full answer...
Go To Results