We have options for a suspension system for your 2020 Lance 1995 travel trailer, but it uses torsion axles, which are not something we offer, so the best alternative we can provide is an axle-less system, the Timbren Heavy-Duty Axle-Less Trailer Suspension.
The Timbrens are simply bolted or welded on so you do not have to worry about finding an axle that meets any specific measurements. The simplest way to install it is to use a piece of 2-inch by 3-inch tubing through the integrated hole... view full answer...
Yes, the Trailer Valet XL Mounting Bracket # TVXLMB is able to mount on a 2 x 6 trailer frame, however it is only compatible with the Trailer Valet XL Trailer Dolly with Chain Drive - 2-5/16" Hitch Ball # TVXL25 or 2" Hitch Ball # TVXL2.
If you do have a 2 x 6 frame, however, you will not need a larger bracket to use the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 5K # TV64FR.
The JXS Jack # TV64FR comes with a large mounting bracket... view full answer...
The Fastway ONEstep wheel chock, part # FA84-00-4000 isn't a trailer specific item. As long as the spacing between the tires is between 16-24 inches as shown in the provided photo, the # FA84-00-4000 chock will work great for you.
I've linked to a demonstration video showing how the chock works. view full answer...
The # PF281007 Replacement Spray Head for Phoenix Faucets Hybrid Pull Out Kitchen Faucets is made for a Phoenix faucet and will not fit on the Dehco. Dehco does not have repair kits or replacement parts for their faucets.
I recommend replacing the faucet entirely. Since you were already looking at the replacement spray head for the # PF231441 Phoenix Faucets Hybrid RV Kitchen Faucet w/ Pull Out Spout, I believe this will work well for you. It has a plastic underbody, metal powder coated... view full answer...
Weight distribution shanks are essentially universal so long as they have the proper hole spacing of 1-1/4 inches apart for most systems, including your Curt TruTrack Weight Distribution System # C17499.
That was a long way of just saying yes, the Curt TruTrack system is compatible with the shank you asked about:
- Curt Welded Weight Distribution Shank # C17123 view full answer...
The Bauer Products Sun Out RV Roof Vent Shade - Retractable # BA89VR is compatible with most 14" x 14" roof vents. This includes your Fan-Tastic Vents manual lift vent. This will replace the existing vent garnish and prevent unwanted light from shining into your 2017 Lance Travel Trailer. view full answer...
The TorkLIft # TLA8102 will be a good fit for your trailer if the "Entry Height" is between 18-1/2" and 28" and the Mounting Bracket width is no more than 25-1/2".
To determine Entry Height, measure from the ground up to the top of the the bracket frame that held the old steps. The product page has a picture showing how to measure.
Then, determine the "Mounting Bracket Width". If your mounting bracket is no more than 25-1/2" wide then the # TLA8102 is a fit. If you have different measurements... view full answer...
Thanks for reaching back out!
It looks like the Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans # FVK8017-00 will actually work with the FV7300 model as well so it's exactly what you're needing! We've confirmed this with Dometic/Fan-Tastic so it will be a guaranteed fit. view full answer...
The Curt # 13703 fits 22" - 72" frame widths and works on box, C-channel, and I-beam frames. As long as this is what you have on your travel trailer it will fit. There is no specific information on the frame of your 2020 Lance 2285 so this is something you will have to measure and confirm yourself.
You may also want to check out the Curt RV Bumper 2" Trailer Hitch Receiver # E-100. This bolts onto 4" square channel bumpers found on many travel trailers. Before using this to tow or carry... view full answer...
To add a hitch to your 2019 Lance 2395 Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs item # 13703. This hitch fits frames that measure from 22" wide up to 72" wide. This hitch works on box frames, C-channel frames, or I-beam frames thanks to the bracket design.
The Curt Trailer Hitch item # 13703 has a 2" receiver with a towing capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. This will work great for a bike rack.
I've linked an installation... view full answer...
The only possible double step upgrade option we have for a 2018 Lance 1475s is the Flexco Manual Pull-Out Steps for RVs part # SMFP-2100. It looks like the only dimensions that won't match up is the mounting flange bolt spacing which is larger on this double so you will need to drill a few holes is all.
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when... view full answer...
Yes, the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR can be mounted on your 2020 Lance 1685 travel trailer. You will need to cut the factory bumper off and mount the included brackets to the extensions off the frame for the factory bumper. view full answer...
Your 2020 Lance 2375 travel trailer will have came with #10 Torflex axles rated at 3,900lbs per axle. The Torflex Lift Kit # K71-707-02 will provide you with 4 lift blocks for your trailer since you have tandem axles. It will provide you with 2-5/8" lift for your trailer.
Since you are lifting your trailer you will likely need more Leveling Blocks # UF48-979051 for the stabilizers and tongue jack. And a couple Adjustable Steps # SASA-10C-G will make stepping into your camper easier since... view full answer...
While we do have the stick-on graduated levels, each of them are in the 3 to 4 inch range like you mentioned and there aren't any that are larger. So the trade off of getting something like the 10 inch Camco AccuLevel Trailer Bubble Level # CAM25563 is that you would have to screw it in.
I can definitely understand now wanting to screw something into the outside of your trailer, so the only option for a stick-on graduated level is the Hopkins Graduated RV Levels # HM08525, or the Hopkins... view full answer...
The Adco Aquashed part # 290-52240 is a really great option for your 2020 Lance 1475. It has zippered panels on either side of it in the front and the back so it will have a panel that lines up with your trailer's door. view full answer...
You'll have two options when it comes to a two panel system:
Option 1: Go Power Overlander Solar Charging System with Digital Solar Controller # GP39MR. These panels have a hard frame and would require you to drill into the roof of your trailer. They are 59-1/8" L x 26-5/16" W and provide up to 380 watts.
Option 2: Go Power Solar Flex Charging System with Digital Solar Controller # 34272628. These panels have a soft, flexible base to fit curved surfaces and can be glued to the roof instead... view full answer...
The # FV807357 Fan-Tastic Vent Roof Vent Assembly Upgrade Kit will work for your 2019 Lance 2185 Travel Trailer if the opening meets the requirements. In order to install this vent, you must have a 14-1/4" x 14-1/4" opening approximately in the trailer's roof and ceiling and the roof can be no more than 4" thick.
These are standard dimensions for a vent opening. If this does not work for you please send measurements and I will do my best to find a solution.
I have attached a review of... view full answer...
While steps are not fits for any specific trailer such as your 2017 Lance 1995, I can tell you how to determine the fit of the SolidStep Manual Fold-Down Steps for 25" - 28-7/8" Wide RV Door Frames - Double - Aluminum # LC733931.
First though, you are correct though that there cannot be interference along the threshold with any lines running there the steps do bolt in. So they either need to not be there or you would need to somehow relocate them. If you can do that, and as long as your... view full answer...
Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch # LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with your trailer I can not guarantee you will not need to make any modifications. Please refer to the images below for their mounting dimensions. view full answer...
Yes, the TorkLift PowerArmor Locking Battery Box # TLA7700L will comfortably fit your 2 Renogy batteries in it since each battery measures 13.1" Wide x 6.9" Deep x 8.6" High. view full answer...
Go To Results