The Roadmaster EZ4 Base Plate Kit, # RM-521448-4, is a confirmed fit for the 2014 and 2015 Jeep Wrangler Unlimited with the standard factory bumper with no winch or guards.
The Roadmaster Falcon 2 Tow Bar, # RM-520, will connect to the EZ4 base plate for the Jeep Wrangler Unlimited.
If you do not have the standard bumper on your Jeep, then you will need to find which type of bumper is installed to find the correct base plate kit. view full answer...
So long as the coils are not different on your lifted 2013 Jeep Wrangler then yes, you can use the Air Lift 1000 Air Helper Springs for Coil Springs - Rear # AL60817. view full answer...
Yes, the Leg Spacers # RRPLHS4 will fit on your RCL Legs # RRRCL6. This will add 3/8" thickness to your legs and allow for the platform to sit flat on your legs. view full answer...
There are both factory and aftermarket backup camera systems available for the 2016 Jeep Wrangler Unlimited and with many of these the presence of a spare-tire-mount bike carrier like the Yakima SpareRide # Y02599 will at least partially block the camera's usual field of view.
Even if the bike rack does not affect the view too much the loaded bikes will almost surely do so to some degree. There is another way to transport bikes that may interest you.
We offer a front-mount hitch for... view full answer...
The Roadmaster # 1439-1 base plates are compatible with the Warn Elite bumper. In order to make the base plates work with your Blue Ox Aventa tow bar, you'd need the # RM-032 adapter.
If you click the provided links, you can read some helpful FAQ articles about flat towing. view full answer...
As long as your 2016 Jeep Wrangler Sport has the standard front bumper then either the Roadmaster EZ4 # RM-521448-4 or EZ5 # RM-521448-5 will work with your Roadmaster All Terrain tow bar. view full answer...
The Roadmaster part you've referenced with part number 521450-5 is no longer available, but it was an EZ-5 base plate so I recommend using the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K # RM-676, which comes with safety cables integrated into the setup. This would be compatible with the discontinued 521450-5 base plate you've mentioned or the current model, which is the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521453-5.
If... view full answer...
Yes. The RhinoRack Universal Load Assist # RR-RUSL is designed to work with Rhino-Rack Vortex Aero style crossbars, and can also be used with the etrailer J-Style Kayak Carrier - Folding - Universal Mount # e98878. This is a great solution to add load assist to your roof rack that will make loading kayaks a breeze onto your 2017 Wrangler. view full answer...
Since the Brake Buddy Stealth Supplemental Braking System # HM39530 comes with it's own special 6 to 7-way adapter cable and port all you'll need is the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-152 to send your motorhome's signals through your Jeep's tail lights.
Your Jeep has combined wiring so you will need to install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400. This will prevent your braking signal from overriding your turn signal, which is important... view full answer...
I have a great roof rack for your 2021 Jeep Wrangler JLU with a hardtop that will work great with the Thule Hullavator item # TH898. It is the 2021 Jeep Wrangler Unlimited Roof Rack by Rhino Rack and includes the following parts.
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2
RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars - Track Mount - Qty 4 item # RRVA-FK1-2
Rhino-Rack Roof Rack Legs - Gutter Mount - 4-5/16" Tall - Qty 4 item # RRRL110S5-2
The... view full answer...
The Thule Top Track Roof Mount System # THTP42 referenced in your question is designed to permanently mount to the roof of your camper and is compatible with the Podium # TH460R Feet. If this is what you currently have, then you will be able to use the Top Track system with your existing components.
You will just need to add the Thule Fit Kit # THKIT3101 if you do not have it already. view full answer...
For the best flat towing components that won't break the bank for your 2008 Jeep Wrangler unlimited you'll want the following parts:
Baseplate: etrailer Invisible Base Plate Kit # e98949.
Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR. This tow bar includes safety cables that are bracketed to the arms to prevent them from dragging on the ground. The head and shank have a bit of adjustability to help keep it level between the motorhome and Jeep without having to purchase an additional... view full answer...
We offer two Roadmaster Base Plate Kits for your 2015 Jeep Wrangler Unlimited and both can be seen using the link provided at right. These two base plates, EZ5 kit # RM-521448-5 and EZ4 kit # RM-521448-4, share removable twist-lock draw bars and both are excluded from use on the 10th Anniversary Rubicon or Call of Duty editions.
I checked with my technical contact at Roadmaster regarding compatibility with your original Blackhawk tow bar. For this tow bar you can use either of these base... view full answer...
The Hopkins wiring harness # HM56200 has diodes that protect the car but will not prevent back feeding to the InvisBrake, # RM-8700. To use the Hopkins harness and InvisiBrake together you would have to install 3 additional diodes, # RM-690, on the Hopkins harness between its diodes and where the InvisiBrake ties into the harness.
You will need one diode each on the green, yellow, and brown wires. But if you are going through all of that you might as well install diode kit # RM-154. view full answer...
I was able to find in your owner's manual for your 2020 Jeep Wrangler Unlimited that Jeep only allows Class S tire chains on the 245/75R17 tires. Since you have different size tires I cannot recommend that you use tire chains as that would go against the manufacturer's recommendations.
If you do decide to use tire chains Titan Chain was able to confirm that for a 38x13.5x17 tire the only chain that will work is the Titan Chain Tire Chains w Cams # TC3259CAM. He mentioned that it will be... view full answer...
I recommend the etrailer Trailer Hitch Receiver # e98856 for your 2017 Jeep Wrangler Rubicon with the factory steel bumpers. It will bolt to the existing bolt holes in your bumper beam. The longer length of the receiver shaft will better fit under your longer bumper to allow you to have easier access and better fit with your ball mount or other hitch mounted accessories.
The Tekonsha T-One Vehicle Wiring Harness # 118416 is a plug and play style connector to give your Jeep a 4-way flat... view full answer...
As long as the bumper you mention is rated by its manufacturer for towing, you won't need a base plate.
The Roadmaster # RM-522 Falcon All-Terrain tow bar can be used on a D-ring bumper like the Rock Hard 4x4 Patriot Bumper if the proper adapter is used. You'll need to remove the D-rings on the bumper and measure the width of the tab that they attach to. If the tabs are 3/4 of an inch wide, use # RM-035 or # RM-035-1 if the tabs are 7/8 or 1 inch wide.
Because D-ring bumpers don't typically... view full answer...
Absolutely, the InfiniteRule Locking Pin # 34065024 is 7/8" in diameter, the inside pin length/span is 3" and the overall length is 3-7/8". It has a safe working load limit of 10,000 lbs and a shear strength rating up to 27,000 lbs, so it will work on the # BX88357 adapter (previously BX88296).
I really like the adapter lugs, it makes it so easy to hook up, and it prevents from having to get a base plate if your already have an off-road bumper with 7/8" lug pins. I linked the parts and... view full answer...
If properly secured to your trailer the ladder rack, # RA-28, could be used as a base for a tent. The rack is rated for 400 pounds maximum so the total combined weight of everything on it cannot exceed 400 pounds. Also whatever the uprights are attached to would also have to be rated as high or higher than the rack. view full answer...
It is easy to recommend the Tekonsha Prodigy P2 Brake Controller # 90885. Our customers consistently rate this item very highly for its easy installation and reliable operation. Plus it has the capability to work with both electric drum brakes and electric-over-hydraulic actuators. If you care to trade up then I suggest the P3 controller # 90195 which has the same capabilities but which includes an easier-to-read digital display. Both are proportional type controllers that will slow your... view full answer...