The K-Source towing mirrors # KS80920 are designed to fit a 2016 Chevrolet Suburban with heated mirrors as well as models with power operation and manual operation, as long as the features are flush mounted. The # KS80920 will not fit models that have telescoping factory mirrors. view full answer...
To know the exact amount your 2003 Chevy Suburban can safely tow you'll need to check the owner's manual or look at the tag in your driver's side door jamb to find your GVWR and GCWR.
Your GCWR is the maximum fully loaded weight of your vehicle and trailer combined. This includes passengers, cargo, fuel, etc. If it's rolling down the road on, in, or with your vehicle or trailer, it counts toward the GCWR. This is typically found in the manual or can be looked up online with your VIN.... view full answer...
I have a solution for you, however, the MaxxTow # MT80635 light will not fit on the Carr C-Profile Rota Light Mounting Bar, # CARR210111. This MaxxTow light is too long to mount to the Carr mounting bar. The MaxxTow bar is 52-1/2 inches long. The Carr light bar can mount a light bar with a maximum length of 50 inches.
The MaxxTow Off Road Light # MT80634 measures 41-1/2 inches long and will fit the 50 inch mounting surface of the Carr mounting bar.
You will also need a mounting kit, #... view full answer...
When flat towing a vehicle you will want to check your owners manual or with the manufacturer for instructions on the proper procedure for towing your 1998 GMC Suburban, because some vehicles must be equipped with a transmission lube pump, an axle disconnect, drive line disconnect, or free-wheeling hubs before they can be towed.
The tow bar base plate listing for the 1998 Chevy Suburban will work for your 1998 GMC Suburban. The same basic frame was used on the Chevy and GMC trucks but... view full answer...
According to my contacts at Curt Manufacturing, the Class V hitch you are referring to, part # C15324 is compatible with the 2003-2006 Suburbans, but not the 2002 model.
Curt does not offer a Class V hitch for the 2002 model, but there is a Class IV, part # 14080. The Class IV hitch has a 10000 lb towing/ 1000 lb tongue weight capacity or 12000 lb towing/ 1200 lb tongue weight capacity when used with a weight distribution system. Keep in mind that the towing capacity of your Suburban may... view full answer...
The Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4 # INXP are a confirmed fit for your 2017 Suburban when you also use the fit kit # INTR154. The Inno square bars # INB137 confirmed to fit this combination are 54" long x 7/8" tall x 1-1/4" wide.
The Malone crossbars are the same 1-1/4 inches by 7/8 inches and can be cut to length, but they are not available outside a kit like # MPG202. The discontinued Thule square load bars can be used as... view full answer...
The correct Timbren Rear Suspension Enhancement System for a 2005 Chevrolet Suburban part # TGMRYS4. The Timbren Rear Suspension Enhancement System part # TGMRG25C will fit as well but is taller so it will engage sooner. view full answer...
There are different types of 7-Way trailer connectors. But the 2 that you will find most on a vehicle are the round pin style or the blade style. The more common one on a vehicle with a factory 7-Way is a blade style.
Adapter # 47405 is for round pins If the 7-Way on your 1984 Suburban looks like the one in the picture then you can use adapter # 47405.
If the 7-Way on your vehicle has flat blades and not round pins then you would need a different adapter, # PK12716. view full answer...
It sure will! Your Forest River Heritage Glen Hyperlite would be pre-wired for the Furrion Vision S camera system like the # FOS43TASF system you'd looked at. The # FOS43TASF has a 4.3 inch monitor, but there is also a system with a 5 inch monitor.
I've linked to a video showing the camera system being installed. view full answer...
The correct Airaid Cold Air Intake System for a 2007 Chevrolet Suburban with 5.3L is part # AR201-267 which I confirmed with Airaid but only if you have electric radiator cooling fans. If you do not have electric radiator cooling fans then you could use the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter part # AR201-196 but this is your only option as they don't offer a full system for models without the electric radiator cooling fans. view full answer...
The correct Curt Front Mount Trailer Hitch Receiver for a 2002 Chevrolet Suburban 1500 is part # 31302, part # 31108 is for 2500 models and they are not cross compatible. view full answer...
The Reese Round Bar Strait-Line Hitch with Shank, item # 66088, lift up brackets will not fit channel frames wider than 2-1/4 inches. As long as your C-Channel frame is no wider than 2-1/4 inches you should not have any problems with the installation.
Along with this system you will need a properly sized and rated hitch ball with a 1-1/4 inch shank. I have listed a couple that may work for you below.
Hitch Ball with 2-5/16 inch Diameter and Medium Shank, 12,000 lbs GTW - Chrome, item... view full answer...
To choose the correct rise/drop needed for weight distribution shank, you will need to determine the height of the trailer coupler when it is level. If the top of the trailer hitch receiver is higher than this measurement (which is most likely the case with your Suburban) you will need a shank that offers a drop equal to the difference.
I have linked to a help article that shows how to measure for the rise or drop needed, as well as link to a video showing how to measure for a weight... view full answer...
It sounds like you have a 4-way round connector and are needing an upgrade to a 7-way connector.
You are correct in looking at the etrailer Universal Installation Kit, part # ETBC7, as the best way to get the 7-way. As for the splicing and wiring into your 4-way round, if you'd rather not do that, we do have an additional adapter that you can use to simplify things.
It's the Custer Trailer Connector Adapter, part # ADP001. This easily converts your 4-way round into the 4-way flat that... view full answer...
Yes, I checked with Yakima and the Yakima RocketBox Pro 14 # Y07192 that you referenced is confirmed to fit your 2012 Chevy Suburban with factory crossbars.
Check out the review video I attached that shows this box being demoed on a similar Suburban as yours.
If you do not have a roof rack you will need to follow the link to the right that will take you to a page that has all of the roof racks available for your vehicle. view full answer...
I reached out to my contact at Curt in tech support and he confirmed that the Curt Front Mount Trailer Hitch Receiver 2", # C31012, is a fit for your 2009 Chevrolet Suburban 2500. view full answer...
I can say that Curt doesn't consider the hitch a fit, but if you look at the provided photo, you can see the mounting hole spacing on the hitch and compare it to the frame member of your truck. view full answer...
The Coil SumoSprings Custom Helper Springs # CSS-1125F are a fit for your 2WD 2012 Chevy Suburban 1500's front axle and can install with or without the removal of the strut from your truck. They will adjust progressively so you'll get more stiffness from the springs the more weight you put on and they'd do a good job of helping support the extra weight from a brush guard and winch.
I've added a link to a video review and installation of these springs for you to take a look at. view full answer...
Yes, the K-Source Snap & Zap Custom Towing Mirror Set # KS80920 will fit your 2015 Chevrolet Suburban whether it is a manual mirror, a powered mirror or a powered/heated mirror. These towing mirrors will not interfere with normal adjustments to your factory mirrors. Please refer to the linked video for more on these K-Source towing mirrors. view full answer...