Expert Answers about Chevrolet HHR
- Will the Thule Speedway 2 TH961XTR Fit on a 2006 Chevrolet HHR with No Spoiler
- I checked with the Thule fit guide, and the Thule Speedway 2, part # TH961XTR will fit your 2006 Chevrolet HHR without spoiler. The FitDial setting for your vehicle is 11. I have added a link to the instructions below
view full answer... - Will The Rightline Gear Rooftop Cargo Bag RL100S20 Fit A 2011 Chevy HHR?
- The Rightline Gear Sport 2 Rooftop Cargo Bag # RL100S20 will attach to a cargo basket, raised side rails, roof rack, or a bare roof, so it is very versatile. However, if your 2011 Chevy HHR does not have raised rails, either factory or aftermarket, and it is a 2 door/Panel style, this will not work. This is due to it needing to have all 4 rubber-coated car clips/straps attached to make sure it is secure on the roof. If you have the 4 door version and/or the raised rails, then you are perfectly...
view full answer... - Thule Passage Trunk Mounted Bike Rack # TH910XT for 2011 Chevy HHR
- According to our friends at Thule, their Passage trunk mounted bike rack, part # TH910XT is indeed a fit for your 2011 HHR.
For womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # TH982XT is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has greater ground clearance and is not carried at an angle.
view full answer... - Recommended 1-1/4" Hitch for a 2023 Chevy Malibu
- The best hitch for your 2023 Chevy Malibu is going to be the Curt Trailer Hitch item # C12185. This hitch is custom fit and bolts to your Malibu with included hardware.
This is a class II hitch with a 1-1/4" receiver. It has a 3,500 lbs towing capacity, and a 350 lbs maximum tongue weight so it will be perfect for your bike rack.
The Curt Trailer Hitch item # C12185 is made in the USA and weighs 41 lbs.
I have linked a couple of pictures below along with an installation video so you...
view full answer... - Recommended Base Plate Kit for a 2009 Chevy HHR that is Compatible with a Commander 2 Tow Bar
- The most affordable base plate for your 2009 Chevy HHR, that is compatible with a Commander 2 Tow Bar, is going to be the Demco Tabless Base Plate Kit item # DM9519196. This tabless design gives you a factory look when you are not flat towing. This will not fit the SS model.
To flat tow your HHR you will also need a wiring harness item # RM-152-98146-7 and a supplemental braking system item # BLU37TR.
To use the Patriot you will need the 12 Volt Outlet Kit item # RM-9332.
view full answer... - What Size Axle is Bearing 29749 Used On?
- Though bearings do not have weight capacities, they do work with axles that have certain weight capacities. Bearing # 29749 is often found on 3,000 lb axles; the matching race is # 29710.
view full answer... - Tow Bar To Store On 2008 HHR That Is Compatible With Blue Ox Base Plates
- I could not find your invoice based on your email to confirm, but you most likely have the Blue Ox Base Plate Kit - Removable Arms # BX1692 with a distance between brackets of 22 inches. I reached out to my contact at Blue Ox and was able to confirm that the Blue Ox Allure Tow Bar - Pintle Style - A-Frame - Car Mount - 10,000 lbs # BX7460P will work if you have a pintle hitch or the Blue Ox Acclaim Tow Bar - A-Frame - Car Mount - 5,000 lbs # BX4330 will work with a 2 inch coupler to mount...
view full answer... - Will the Thule Passage 2 Bike Carrier - Trunk Mount, # TH910XT Fit a 2008 Chevy HHR
- According to Thule, the Passage 2 Bike Carrier - Trunk Mount, # TH910XT, will fit your 2008 Chevy HHR. I have included a link to a video review of this rack below. You might also be interested in the Alternative Frame Bike Adapter Bar for Hitch Bike Racks, # TH982XT. I have included a video review of this adapter below as well.
view full answer... - Increasing Performance on 2010 Chevy HHR SS
- The Superchips Flashpaq F5 Performance Tuner - California Approved - Gas/Diesel # SU4845 was only a fit for model years up to 2009. I reached out to my contact at Superchips and Edge and there is not a fit for your 2010 Chevy HHR model to enhance performance. You can use the Edge Insight CS2 Comprehensive Gauge Display - Color Screen # EP84030 to troubleshoot codes and display parameters.
To increase your performance the only option we have is the MagnaFlow Cat-Back Exhaust System -...
view full answer... - Will The Blue Ox Acclaim Work A Blue Ox Baseplate On A 201 Chevy HHR
- The only compatible Blue Ox baseplate for a 2011 Chevy HHR is the # BX1692, which has a bracket spacing of 22". The Blue Ox Acclaim Non-Binding Tow Bar # BX4330 requires a spacing of 23" - 30" so it will not be compatible with the baseplate.
The next closest option in price and functionality is the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar is a bit more than the # BX4330, but comes with quite a bit more features to make up for the higher price point....
view full answer... - How Does Backup Light of Fusion LED Trailer Tail Light Work
- In order to utilize the backup light function of the Fusion LED Trailer Tail Light # STL211RB you will need to plug in a 2-Wire Pigtail, either part # A45CB or # A49PB for a right angle pigtail. You can see from the accompanying photo of the rear of this light that it has connections for both a 2-wire and 3-wire plug.
This would need to be used along with the 3-Wire Pigtail # A45PB or # A47PB (right angle) which gives the light its tail light functions. I looked up your order from the...
view full answer... - Parts Needed To Use Roadmaster Sterling Tow Bar To Flat Tow 2007 Chevy HHR
- I can help you get the parts you need to flat tow the 2007 Chevy HHR with the Roadmaster Sterling All Terrain tow bar part # RM-576.
I recommend the Roadmaster Base Plate kit part # 3141-1 to fit the Sterling Tow Bar.
For the wiring I recommend Hopkins part # HM56100. It wires the towed vehicle to accept the RV's tail, brake and turn signals when flat towing without splicing into your vehicle's wiring. According to Roadmaster there are fuses that need to be pulled in the HHR when you...
view full answer... - Parts Needed to Flat Tow a 2009 Chevy HHR Behind a Motor Home
- This has actually come up before and Roadmaster explained that they have not tested their base plates with the EAZ Lift tow bars so I cannot say if they will fit or not. You would need to contact EAZ Lift to determine if they have tested it with Roadmaster or Blue Ox base plates.
What I recommend is using the Roadmaster base plates, # 3141-1, and using a tow bar that you know is compatible like the Falcon 2, # RM-520. You will also need safety cables like # RM-643. Next you will need...
view full answer... - Does Hopkins Custom Fit Tow Bar Lighting Kit fit 2011 Chevy HHR
- That kit was not carried over to the 2011 HHR models but does fit the older ones like you noted.
We don't have any custom fit options for the 2011 models but the Roadmaster diode kit part # RM-15247 would be an excellent option. It splices into the taillight wiring of the vehicle to allow the tow vehicle the ability to control HHR's taillights.
view full answer... - Recommended Flat Towing Equipment For A 2011 Chevy HHR
- To flat tow your 2011 Chevy HHR you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you:
Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522. This tow bar features non-binding latches and a large hookup radius to make connecting and disconnecting your HHR on any terrain easy peasy. Since Roadmaster no longer include the crossbar with their tow bars you'll also need the Replacement Quick Disconnect...
view full answer... - Trailer Hitch for a 2009 Chevy HHR SS to Use with Kuat Transfer Bike Rack
- I checked with Curt and trailer hitch # C11447 will fit your 2009 Chevy HHR SS model! You mentioned that you want to use the hitch for a bike rack. If you choose the Curt hitch then Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements.
If you don't want to have to use the strap then I recommend the Draw-Tite hitch, # 24756, because it does not require the use of the...
view full answer... - Does the Stabilizer Strap for a Curt Hitch on a 2011 HHR Need to be Used for a Single-Bike Bike Rack
- If you are wanting to install the Curt Trailer Hitch Receiver # C11447 on your 2011 Chevrolet HHR then a stabilizer strap like part # 18050 would need to be used according to Curt's warranty. The warranty simply says any non-trailer load so even a single bike rack would fall under that.
With that being said, where you attach the strap doesn't matter at all. You could actually just loop it over the crossbeam of the RockyMounts HighNoon FC Solo Bike Rack # RKY87RR and then back to your vehicle...
view full answer... - Will Rhino Roof Rack RRVA106S-2 Fit 2011 Chevrolet HHR With Siderails
- If your 2011 Chevrolet HHR has the factory installed rails, the Rhino-Rack SXB Roof Rack, part # RRVA106S-2, and part # RRSX100 is a good fit. This system Includes 4 legs that attach to the siderails, 2 silver 42 inch long Aero crossbars, and 4 locking endcaps. Depending on the cargo you plan to carry, the size and shape of the crossbars may be something to consider. If you know what type of cargo you will be using the rack for, we can better assist you with selecting the correct racks...
view full answer... - Fit of Thule Self-Tensioning Snow Chains # TH00023095 on a 2008 Chevy HHR w/ Size 215/55-16 Tires
- According to Thule, the maximum recommended top speed when using the Self-Tensioning Low Profile Snow Chains is 50 KPH, or about 30 mph. The chains will fit the tires on your HHR.
I found an online copy of the owners manual for the 2008 HHR, and saw that Chevy does not recommend using tire chains, so I would recommend consulting your Chevy dealer for a clarification.
I have linked you to an article about tire chains that you might find helpful.
view full answer... - Correct Trailer Hitch for 2014 Mercedes-Benz CLA250 All Models and How To Convert To 2
- The Curt Trailer Hitch Receiver part # C12163 is correct for a 2014 Mercedes-Benz CLA250 (All Models). It is also the only available option and it offers drill-free installation with a hidden design. I have attached an install photo. The Curt hitch has a 1-1/4" receiver tube opening but there is an option to convert this to a 2" receiver tube opening with the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD.The hitch pins are not included you will need these as well, part #...
view full answer...
Go To Results