I spoke with RoadActive Suspension and confirmed that the RoadActive Suspension Custom Leaf Spring Enhancement Kit part # RAS4617 is indeed a fit for a 2019 Chevrolet Colorado ZR2. In regards to fitment, RoadActive was not aware of any shock clearance issues but they did state that you would have to change out the shackles which are included so no worries here. That said, there are adjustment that can be made during installation which should then alleviate any clearance issues.
As noted,... view full answer...
We do provide tow mirror solutions for your 2018 Chevy Colorado but the Custom Towing Mirror # CM10951 is designed for Chevy Silverado and GMC Sierra models so they would not be a fit.
This universal fit mirror set available from K-Source # KS3990 is my recommendation. In the included video you can see how these look installed, a solid overview of the product, and a road test to see how these perform. view full answer...
Generally speaking, you are better off to have anti lock brakes rather than not to have them in any weather. You would have to contact your dealer/manufacturer to see what they advise specifically. For the most part, it is important to select correctly sized chains and to make sure you have enough clearance for chains around the wheel well, and behind the wheel where brake lines and steering struts work.
The 2019 Colorado came with three tire options. I am showing options for light duty... view full answer...
We have just the trailer hitch receiver you are looking for.
I recommend the etrailer Trailer Hitch Receiver # e98909 you were looking at as it is a confirmed fit for your 2017 Chevrolet Colorado ZR2 4x4. The etrailer # e98909 has a tough matte black powder coat finish that will protect the hitch from wear and tear, and will install nicely with only the receiver being shown as you can see in the included picture.
The etrailer # e98909 has a maximum tongue weight capacity of 800lbs, and... view full answer...
There is one tonneau cover I can confirm is a fit for a 2019 Chevrolet Colorado ZR2 with the Sport Bar, though it isn't the Pace Edwards.
I researched with our tonneau cover manufacturers and the tonneau cover that does fit this truck with the Sport Bar is the TruXedo Lo Pro. For your '19 Chevy Colorado, the correct fit is going to depend on your bed size:
- 5 foot 2 inch bed: TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX549901
- 6 foot bed: TruXedo Lo Pro Soft Roll-up Tonneau Cover... view full answer...
The Thule TracRac ladder rack that fits your 2016 Chevrolet Colorado with 6-foot bed is kit # TH43002XT-783. Or if you want the rack with the 3rd cantilever bar for over the cab you can instead install kit # TH43002XT-783EX.
Since both of these ladder racks install on top of the truck's bed rails you can use the compatible BAK Revolver X2 hard tonneau cover # BAK39125 that installs inside the bed rails. view full answer...
The etrailer Trailer Hitch Receiver # e98909 is confirmed to fit your 2022Chevrolet Colorado. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" hitch receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you are needing a bike rack, I recommend the Yakima OnRamp Bike Rack # Y36FR. The Yakima OnRamp Bike Rack # Y36FR will hold 2 bikes up to 66 lbs.... view full answer...
Since the owner's manual of a 2021 Chevy Colorado specifies that a rock guard should not block the front grill of the truck, the only option for a guard to keep the front of the truck from getting dinged from debris is from Roadmaster:
- Roadmaster Tow Defender Protective Screening # RM-4750
The Tow Defender screening lays flat across the tow bar and is made of nylon mesh so it won't interfere with the front of your '21 Colorado, so this is exactly what you will need in order to keep... view full answer...
The Westin Ultimate Bull Bar with Skid Plate - 2-1/2" Tubing - Black Powder Coated Steel # 32-3645 does interfere with the forward collision sensors in your 2022 Chevy Colorado. I spoke to the manufacturer and they are currently in the process of designing a new model that will not interfere with the sensors. Due to the location of the sensors we do not currently have a model that will not interfere with them. view full answer...
We do have the Yakima BaseClip 110 (B10-4), which are the fit kits for a Yakima roof rack on your 2019 Chevy Colorado. The part you are looking for is the following:
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06110 view full answer...
Yes, our part number # RM28GR and the Roadmaster 523222-5 and one and the same. We use our own unique part numbers for a lot of Roadmaster parts. The Roadmaster Direct-Connect Base Plate Kit # RM28GR (523222-5) will be the correct base plate for the 2023 Chevy Colorado Trail Boss.
If you need additional components for your flat tow setup, feel free to reach out to me directly and I am happy to send a parts list. view full answer...
The trailer hitches we offer for your Colorado are designed to fit all models. With that being said, if you modify the truck in any manner, you do run the risk that a hitch may not be able to be installed.
I have attached a photo of the underside of a Colorado with the Draw-Tite Trailer Hitch, part # 75607 installed. I noted with arrows some of the places you may have issues with since you have a pan installed. You can check out the photo and determine if a hitch will work for your truck.... view full answer...
For your 2018 Chevy Colorado with a 5' bed and BAKFlip G2 Hard Tonneau Cover # BAK26126 I recommend the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001225. This ladder rack will mount in the stake pockets in your bedrails allowing you to retain use of your tonneau cover. This rack has an extruded anodized aluminum finish on crossbars and rails provides extra durability and corrosion resistance and a weight capacity of 500lbs. view full answer...
Yes, you can also install the Derale Series 8000 Plate-Fin Transmission Cooler # D13503 on your 2018 Chevrolet Colorado with the 2.8L Duramax engine. This cooler is a great addition to most vehicles that are towing, especially in the hotter climates or are subjected to a lot of stress when towing(stop and go). Installation is made easier on your Colorado with a Derale Snap-In Radiator Adapter Fitting # D13035 that allow you to not have to cut your transmission lines.
By keeping the transmission... view full answer...
The TruXedo Truck Luggage Expedition Truck Bed Cargo Management System part # TX1705211 is a universal cargo organizer which means it is designed to be used on several different trucks. This also means that the manufacturer does not perform test fitting on certain makes and model of vehicles and neither do we so I would not be able to confirm with 100% certainty that it will fit your 2016 Chevrolet Colorado.
However, as long as your truck bed is at least 57.4" wide then it will work for... view full answer...
The AirBedz part # AB42ZR that you referenced is designed to fit your 2018 Chevy Colorado's back seat with the seats folded up since it has the lower portion that goes down into the leg area. This fits the version of the truck that have the 5 foot or the 6 foot bed. view full answer...
Congratulations on your new tear drop trailer. We normally recommend using a weight distribution system when the trailer weighs 50% or more than the vehicle's weight, you are experiencing sway and/or the Colorado is sagging. Sometimes you won't really know that you need a weight distribution system until you get a feel of how the setup tows especially on the highway.
Since your trailer only weighs 3,500 lbs at it's heaviest I don't foresee you having issues with sagging or needing weight... view full answer...
Very few ladder rack companies also offer compatible tonneau covers so you would have to use two different branded options, especially since you want a hard-folding cover. For your 2018 Chevy Colorado the I recommend the BAKFlip FiberMax Hard Tonneau Cover # BAK126126 along with the TruXedo Elevate Truck Bed Rack System # TX86NV. These two a confirmed to work together cohesively and would give you a ladder rack that can be adjust to different mounting points and adjust from 18" to 28" tall.... view full answer...
I do have a suspension enhancement system for you but the SumoSprings Solo Custom Helper Springs part # SSR-212-40 will not fit a 2018 Chevrolet Colorado or a 2018 GMC Canyon with the diesel engine. The reason for this is because this kit clamps around the frame rail and there are components on the frame rail for the diesel fuel system.
Instead, I recommend using the Timbren Suspension Enhancement System part # TGMRCCA which are very similar to the SumoSprings is how they install and function... view full answer...
The Westin Grille Guard for the 2008 Colorado, Part # 40-1515, uses the same mounting points on your vehicle frame as your front-mounted tow bar hitch. My contact at Westin confirmed this.
Therefore, these two parts unfortunately cannot be used on your vehicle at the same time. view full answer...
Go To Results