The Rack-Em Double Barrel Liftgate Assist, part # RA-27C is 54 inches long. We do offer another assist kit, Gorilla Lift Tailgate Assist, part # GL1, that has barrels on both sides of the tailgate. view full answer...
The Buyers Products LiftDogg Pickup Truck Liftgate w/ Custom Mounting Brackets # 33713006039-1100 that you referenced weighs 541 lbs. I know you didn't ask for the lift capacity but that is 1,300 lbs. view full answer...
I had someone in our warehouse pull Custom Mounting Kit for LiftDogg Pickup Truck Liftgate - Ford F-150 and F-250 # 3375051205 to get some measurements for you. The triangular brackets measure 18-3/4" long and 9-7/8" wide. The rectangular brackets measure 18-1/2" long and 6-7/8" wide (or 6-5/8" wide not including the lip). See the attached diagram which illustrates these dimensions. This kit is confirmed to fit your 2012 Ford F-250. view full answer...
Yes, it will. I checked with Curt and they said the Curt Rack Receiver item # C87NR will not block the liftgate function. Typically what happens is the range is lost right around the 2" receiver but based on where the receiver extends out from within your trim I would not expect there to be any issues.
The Curt Rack Receiver item # C87NR is confirmed to fit your 2024 BMW iX 50i. This hitch is custom fit and bolts to your BMW with included hardware.
I have linked the installation instructions... view full answer...
The Thule Enclosed Cargo Carrier, part # TH665C would be compatible with the hitches with 2" receiver openings that are available for your 2009 Chevrolet Tahoe, so it would be compatible with your Tahoe. This carrier has a swinging feature that will give you access to the rear of the vehicle. You can see how it slides off to the side in the attached video. view full answer...
To add a 2" hitch to your 2023 Honda Pilot, I recommend the etrailer Hitch item # e27KR. This hitch is custom fit and bolts to your Pilot with included hardware. This is a class III hitch with a 2" receiver. It has a maximum tongue weight of 900 lbs so you will have no issues with capacity.
I have linked an installation video below.
Please note that the hitch fits with a mini spare tire stored under your Pilot, but does not fit with a full size spare. Also, the hitch may interfere with... view full answer...
I contacted Draw-Tite about the Class III Max-E-Loader Trailer Hitch, item # 41004. Draw-Tite informed me that the measurement they have is 5-3/4 inches from the mounting location to the top of the receiver tube that the drawbar slides into.
I do have the following hitches in stock for your truck and measured the distance from the top of the receiver tube to where it mounts to the frame and got the following dimensions.
Class III Max-Frame Trailer Hitch, item # 75038 is 5-1/4 inches from... view full answer...
To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item # C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this hitch because the crosstube mounts behind your rear bumper completely concealing everything except for the 2" receiver.
There are two options for wiring harnesses depending on whether your CR-V hybrid is front wheel drive or all wheel drive. I have... view full answer...
Yes, you are correct. The Curt Trailer Hitch item # C13397 is the correct hitch for the 2023 Honda CR-V Hybrid. The wiring harness is going to depend on whether or not your CR-V is front wheel drive or all wheel drive. I have listed both options below. One is custom fit and the other requires splicing.
Front Wheel Drive - Curt Powered Tail Light Converter item # C59236
All Wheel Drive - Curt T-Connector Vehicle Wiring Harness item # C56370
You may lose some of the range on the Hands... view full answer...
Aftermarket trailer hitch installation will typically block the center sensor of a vehicle lift gate system but does not affect the others, so usually all that needs to happen is you swing your foot near the outer sensors rather than the central one. There is no difference between the two Draw-Tite hitches in this regard.
The actual height above ground of an installed hitch depends on a number of things: passenger load, cargo load, wheel and tire size, tire tread depth and inflation pressure.... view full answer...
To carry bikes on your 2015 Ford Edge, I recommend using a trailer hitch and hitch mount bike rack.
The trailer hitch I recommend for your 2015 Ford Edge is the Draw-Tite Class III Max Frame Receiver Hitch # 75234. This trailer hitch is confirmed to fit SE, SEL, Titanium, and Sport models of the 2015 Edge. The 2 inch hitch receiver will accept a wide variety of hitch mount accessories on your Edge. The hands-free liftgate will still function with this hitch installed, but will be limited... view full answer...
From what I am able to find, it appears that the 2015 Ford Escape 2.0 Ecoboost engine has a towing capacity of 3500-lbs; so you'll be able to tow any boat and trailer combo under that total weight. We always recommend confirming that with your owners manual, but you can also check with your local Ford dealer for confirmation of what your vehicle is capable of.
Since you need a hitch in order to tow a boat with your vehicle, I recommend going with the Draw-Tite # 75782 since it is the only... view full answer...