From side to side, the bolt holes on the Curt # 13377 are all the same distance apart at 42.46 inches center to center. From the rear to the front, the distance from the first hole to the second hole is 2.804 inches. The distance from the second, or middle, hole to the hole closest to the front of the vehicle is 3.673 inches. This is the same for both sides of the hitch. I have provided a diagram showing these measurements for your reference. view full answer...
The Curt Trailer Hitch Receiver # C13377 has a shipping weight of 36 lbs so after you take off the packaging it will weight 30 lbs.
It does have a max gross trailer weight rating of 3,500 lbs and a max tongue weight rating of 525 lbs. This trailer hitch is confirmed to fit a 2017 - 2018 Nissan Rogue Sport. view full answer...
For a light that is similar to the Optronics MC44RB1 but has a 2-wire design you will need the following:
- Optronics LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 6 Diodes - Red Lens # MCL44RB
This is the same light, with exactly the same dimensions and mounting hole spacing as the MC44RB1, with the only differences being that this is an LED light instead of incandescent, and that it is a 2-wire light so it's exactly what you're looking for. view full answer...
The Curt Trailer Hitch Receiver part # C13377 and the etrailer Trailer Hitch Receiver part # e79YR which are the two trailer hitch options for your 2019 Nissan Rogue Sport have the same ground clearance measurement. This ground clearance measurement will be around 12-1/2" from the ground to the top inside edge of the receiver tube opening or 10" from the ground to the bottom of the receiver tube collar. Please note that these measurements are not exact and can vary slightly based on tire... view full answer...
Go To Results