I checked with Draw-Tite and yes it will. The Draw-Tite Trailer Hitch item # DT73QR is confirmed to fit the hybrid model of the 2023 Lexus RX 350. This hitch is custom fit and bolts to your vehicle with included hardware. view full answer...
Actually the two hitches are almost the same. The # C13214 is getting replaced by the part # C13337.
There is a subtle difference with the front part of the mounting brackets (rear-most on vehicle) likely so that they can extend the vehicle year range it fits. view full answer...
I would be happy to! The rear bumper does not need to be removed to install a hitch on your 2024 Lexus NX 350h. I checked with our vendors and the only hitch that is currently confirmed to fit the 2024 model is the Curt item # C33NR.
The Draw-Tite item # DT82QR you were looking at most likely fits but we don't know for sure because we haven't tested it on a 2024 NX 350h. Additionally, Draw-Tite got bought out at the beginning of the year and they are way behind on their 2024 vehicle fitment.... view full answer...
The Draw-Tite item # DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware.
I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better it also helps with ground clearance.... view full answer...
The 5 inch measurement for the Erickson Rubber Tarp Strap, # EM06755, is the overall length of the rubber. The overall length from the outside of one hook to the other is about 9-1/4 inches. From the inside of one hook to the other is 9 inches. view full answer...
The tongue weight capacity of the CURT Trailer Hitch, # C13143, for the 2010 Lexus RX 350, is 600 pounds. If the vehicle tongue weight capacity is under 600 pounds or under the 500 pounds of the carrier then you go by the lowest rating.
Tongue weight is calculated by the weight of the carrier plus the weight of the cargo loaded on it. You also have to add in the weight of anything loaded behind the rear axle of the vehicle.
So, if you have a 50 pound carrier and put 200 pounds of cargo... view full answer...
Congrats on the new car! Yes, we do have a roof rack set up that will work with your 2024 Lexus ES 300h even though you don't have the side rails. This mounts directly to your roof with custom fit clips and the crossbars will not overhang the side. I recommend the roof rack by Yakima and it includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170
This aero bar roof rack system has a 165 lbs capacity. I have attached a couple... view full answer...
Congrats on the new car! To add a 2" hitch to your 2024 Lexus NX 250, I recommend the Curt item # C33NR. This hitch is custom fit and bolts to your Lexus with included hardware.
The Curt Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
I recommend using the No-Drill Mount Bracket item #... view full answer...
Yes, it does! The Curt Trailer Hitch item # C33NR is confirmed to fit the new 2024 Lexus NX 350. This hitch is custom fit and bolts to your Lexus with included hardware. This hitch is not compatible with the F Sport models so it's good you don't have one.
The Curt Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount... view full answer...
The best hitch for a 2024 Lexus NX 350h is the Curt item # C33NR. This is a 2" hitch, which is custom fit and bolts to your Lexus with included hardware.
The Curt Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I have attached a couple of pictures below along with the installation instructions to help you get this hitch set up and show you what it looks like once installed.
If you are planning on towing... view full answer...
Yes, we do! To add a hitch to your 2024 Lexus NX 450h Plus, I recommend the Curt item # C33NR.This hitch is custom fit and bolts to your Lexus with included hardware. It does NOT fit the F Sport models.
The Curt Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I have attached a couple of pictures below along with the installation instructions to help you get this hitch set up and show you what it looks... view full answer...
The roof rack by Yakima is the closest set up we have to a factory roof rack for your 2024 Lexus UX 250h. These crossbars attach directly to the flush mounted rails that run along the side of your roof. You will need the following parts:
Yakima SightLine FX Roof Rack for Flush Side Rails - Aero Crossbars - Black - Qty 2 item # Y43UV
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y59AR
This aero bar roof rack system has a 165 lbs capacity. I have attached... view full answer...
The only hitch available for a 2023 Lexus NX350 is the Curt Trailer Hitch item # C33NR. This hitch is custom fit and bolts to your Lexus with included hardware.
This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534. view full answer...
The part you referenced, Georgia Bulldogs G Logo Trailer Hitch Receiver Cover # CTH5S, is an all-metal hitch cover that provides three hitch pin holes for mounting in a 2-inch receiver. The measurements you requested, the distances from the back surface of the oval logo portion to the centers of the three hitch pin holes, are: 1-1/4-inches, 2-inches and 2-3/4-inches. The linked photo illustrates. view full answer...
The WeatherTech Cargo Liner is a confirmed fit for your 2020 Lexus LX 570 and will install behind the second row of rear seats, though I did reach out to WeatherTech who sent me the accompanying diagram it measures 45.415" long x 56.173" wide.
The cargo liner for your Lexus LX 570 comes in a number of different color options:
- Black: WeatherTech Cargo Liner # WT40856
- Tan: WeatherTech Cargo Liner # WT41856
- Gray: WeatherTech Cargo Liner # WT42856
- Cocoa: WeatherTech Cargo Liner #... view full answer...
The torque specs are in the attached install instructions link. We don't post them on our site as they are allegedly subject to change so we instead link the instructions straight from manufacturer so in case they get updated we at any point wouldn't have incorrect torque specs listed. See step 3 of attached instructions. view full answer...
Yes, it is. To add a hitch with a 2" receiver to your 2024 Lexus NX 350h, I recommend the Curt Trailer Hitch item # C33NR. This hitch is custom fit and bolts to your Lexus with included hardware.
The Curt Trailer Hitch item # C33NR is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. view full answer...
Yeah it sits pretty low. When the Curt Trailer Hitch item # C11389 is installed on a 2014 Lexus IS250 the bottom of the receiver sits only 6" off the ground.
The Curt Trailer Hitch item # C11389 is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight.
I have linked an installation video below to help you get it set up.
If you are planning on towing you will also need a wiring harness item # C56142 and the Draw-Tite Drawbar item... view full answer...
I spoke with Rhino-Rack, and they informed me that the tool that comes with the:
-Rhino-Rack SX Series Legs for Vortex Aero Crossbars # RRSX100 is 7" long. view full answer...
Go To Results