Yes, they do. The Blue Ox Sway Pro item # BLU54TR and item # BXW2003 are a couple of our most popular weight distribution systems that include the 2-1/2" shank.
If you already have a weight distribution system, or want to go with a different manufacturer, you can use the Equal-i-zer Weight Dist Shank item # EQ90-02-4900. The bolt patterns are standard so this will work with nearly all systems on the market.
If you would like a more specific recommendation, feel free to email me directly... view full answer...
The overall length of the Replacement Topwind Handle w/ Claw Knob for etrailer and Ram Square, Direct Weld Jacks # TJD-7000-HD is 10-1/2 inches. The center to center length is 9 inches. I've attached a photo to assist. view full answer...
For your 2024 Chevy Silverado 2500, you will want the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1020. This gooseneck platform is custom fit for your Chevy truck. It mounts to existing holes in your trucks frame to speed up installation time.
I have attached a couple of pictures along with an installation video below so you can see what this system looks like once installed and how to get it set up.
To make towing with a 5th wheel easier, I recommend adding the Curt... view full answer...
To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124
I have attached a couple of pictures below that will give you an idea of what this system will... view full answer...
Yes, we do have a set of air bags that will fit your 2024 Chevy Silverado 2500 that are also compatible with an in bed hitch. They are the Firestone Ride-Rite Air Helper Springs item # F2613. These air bags have a 5,000 lbs capacity that will level out the rear end of your Silverado when you are towing your 5th wheel trailer. All mounting brackets and hardware are included for installation.
I also recommend adding the Air Command Compressor System item # F2610 to your truck. This wireless... view full answer...
Demco does not provide measurements for rail placement for installation kit # DM8552011-71 for your 2015 Chevy Silverado 2500 but what they do say is that the hitch can be centered over the center of the rear axle up to 3 inches forward.
On a short bed truck you will want it as far back as you can so centered over the axle is a good place for the hitch. Now, from the center of the hitch forward on the truck to the front of the rail will be approximately 14 inches. So you would measure... view full answer...
The Replacement Long Arm Assembly part # 1500052414 is 18 1/4 inches when it is fully open but when you have it fully closed it is 17 1/2 inches overall. view full answer...
I had our warehouse measure the Titan Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs # T4750820 you mentioned and it is 26-1/2" long, 5" deep not including the mounting bracket, 8" deep including the mounting bracket, 4" wide at the narrowest point, and 6" wide at the widest point which is the heads of the bolts on each side.
I included a diagram of these measurements for you to take a look at. view full answer...
The Reese Under-Bed Rail and Installation Kit item # RP30868 is confirmed to fit your 2017 Chevy Silverado 2500. This system is the same one that Ford uses in their factory prep package. It is also available with a gooseneck hitch item # RP30158-68.
The Adapter Rails for Curt 5th Wheel Hitch item # C88KR will fit the Ford pattern and provide you with a set of industry standard rails for your Reese item # RP30047. This adapter will add 2-1/2" of height to your 5th-wheel hitch when it is... view full answer...
The Demco Recon fifth wheel hitch adapter part # DM8550045 that you referenced can fit basically any hitch ball that is shorter than 5 inches in height above the truck bed which the part # C38CR we offer is compatible with so it would be your best choice. view full answer...
The hole for the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1020 will be 45-5/16" to the hole center of the 4" hole from the rear of the truck bed, centered between the fenders on your 2020 Chevrolet Silverado 2500HD with an 8' bed. I have included a picture of this location that also shows the short bed measurement of 37-1/8" to the center of the hole.
Don't forget the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # HM54FR for adding a trailer wiring... view full answer...
To add a 7-Way connector to the bed of your 2024 Chevy Silverado 2500, I recommend the Draw-Tite 5th Wheel/Gooseneck Wiring Harness item # 20110. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient. It attaches to the OEM Wiring harness beneath your truck bed.
I have linked an installation video below so you can see how to get this harness set up. view full answer...
The actual width of the fabric/canvas on the Solera Slide-Topper Awnings will be right at the max box width range. The max box width range for the Solera Slide-Topper Awning part # LCV000165062 for black or part # LCV000163287 is 85-3/4" therefore, the actual width of the canvas is going to be around 85". view full answer...
The B&W Turnoverball Gooseneck Hitch # BWGNRK1020 you were looking at for your 2021 Chevrolet Silverado 2500 weighs in at 136lbs.
I included a video of the # BWGNRK1020 being installed in a similar truck for you to take a look at. view full answer...
According to Ultra Fab there are many factors that can effect air pressure such as the size of the air spring in diameter and height, the pin weight of the trailer, the mechanics of each individual hitch, altitude and air temperature. Ultra Fab has stated that usable air pressures can range from 20 to 120 psi. Therefore a specific air pressure is not recommended. Instead it is recommended to inflate the air bag to maintain a ride height.
To determine the ride height Ultra Fab has indicated... view full answer...
The dealership from which you will purchase your trailer ought to be able to give you the height of the king pin when the trailer is level, as it needs to be for best handling when towed. He also can look at the pin box to see in what position it is installed on the trailer's mounting wings. If it is already mounted at the highest possible position then this tells you that you cannot lower the trailer's nose any further, but you could raise it. Conversely, if the pin box is already at the... view full answer...
Since you're already using the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G along with your B&W gooseneck hitch what I suggest is using the B&W Offset Ball # BWGNXA4085. This will give you 4-inches of additional turning clearance but cost you a lot less than a new adapter. If you find you still need more clearance you can always change adapters.
You can check by measuring. Note the distance from the center of the ball to the cab. From this subtract half of the trailer's... view full answer...
As far as the fitment of the Aries Switchback Headache Rack # AA1110109, that part will not fit either your 2018 Chevy Silverado 3500 or your 2021 Chevy Silverado 2500. While we do carry a Switchback model that will work with your 2018 Chevy Silverado 3500, we also offer some great options for headache racks for your 2021 Chevy Silverado 2500.
For the Switchback Headache Rack that will fit your 2018 Chevy Silverado 3500 (both 6-1/2 and 8-foot beds), you will need the Aries Switchback Headache... view full answer...
Equal-i-zer Weight Distribution Shank # EQ90-02-4800 has a shipping weight of 31 pounds while # EQ90-02-4900 has a shipping weight of 33 pounds. The packaging weighs about a pound at most so you are looking at a weight of 30 pounds for the 4800 and 32 pounds for the 4900. I have included links to videos on both shanks for you. view full answer...
The total weight of the Equal-i-zer Weight Distribution System # EQ37120ET that you referenced is 115 lbs, but that would include components that would not be lifted into the trailer hitch.
Realistically you would be lifting the head and the shank together into the hitch and then installing the bars after the fact. The head and the shank together weigh right at 45 lbs. view full answer...
Go To Results