The Redarc Tow-Pro Liberty Brake Controller part # RED24FR and the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR have two primary differences. The Elite can toggle between a user controlled (time delayed) mode for the trailer brakes for off road use and proportional mode, while the Liberty operates only proportionally. The Elite is rated for up to 3 axles whereas the Liberty is rated for up to 2 axles.
If you won't be operating your trailer off-road, the # RED24FR Redarc... view full answer...
There isn't much difference at all between the etrailer Trailer Hitch # e63ZR to the Curt Trailer Hitch # C13417 for your 2020 Ford Ranger, so you aren't missing anything though it's smart to ask. The differences are just in the respective finishes, with the etrailer hitch having a modern black matte finish compared to the Curt's traditional glossy black finish.
Aside from that, the two hitches actually install exactly the same on your Ranger so there aren't going to be any surprises;... view full answer...
For me, between the Access Cover, # A22010109 and the Truxedo, # TX250101, I would go with the Access cover because it is as low profile design. It sits only 1/2 inch above the bed rails. The Truxedo cover is 1-1/2 inches above the rails. Given that the prices are about the same, what would sell me on the Access cover is that low profile design.
In terms of keeping out water, the Access cover comes with a weather seal that runs along the truck bed sides and you can add a tailgate gasket,... view full answer...
We don't carry the Hayes system, but I can explain the differences between the Tuson # 335TSC-1000 Asymmetric Sway Control and the Lippert # LC380605 Sway Command.
• The Tuson is compaitble with 1 to 4 brake axles, while the Lippert is only compatible with up to 2 axles.
• The Tuson needs to be mounted between 1-10 feet rearward of the trailer hitch ball, while the Lippert can
be mounted anywhere between 4-10 feet rearward. Both need to be installed on the trailer centerline.
• The... view full answer...
Both 4-pole wiring harnesses available for your 1988 Ford Ranger, Curt # C55314, and Hopkins # 40205, are custom-fit types that plug in to connectors on the vehicle and both are passive, meaning that they do not require a 12V power feed directly from the vehicle's battery. So the power for the trailer lights will be drawn through the truck's own wiring. As far as differences, besides the way the connectors are attached to the harness there really is no difference. I personally recommend... view full answer...
The difference between the Curt Class III Receiver Hitch part # 13019 and the Curt Class III Receiver Hitch part # 13138 is strictly aesthetics. The square tube option is a bit more cost effective and it matches the body lines on your 1992 Ford Ranger so this is what I recommend.
I have attached a photo of each so you can compare them side by side. view full answer...
You are correct that the etrailer Trailer Hitch Receiver # e63ZR and the Curt Trailer Hitch Receiver # C13417 for your 2021 Ford Ranger are almost identical. Both of these hitches are made in the USA, have a bolt-on, no-drill installation and have the same weight capacities. They will also both provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
The real difference between these two hitches... view full answer...
Good question. You are correct, they look identical because they basically are with one exception. The Curt # C13417 uses a glossy finish while the etrailer # e63ZR uses a matte black powder coat finish. This is what sets the etrailer hitch apart from other hitches and the reason I recommend it. The matte black finish provides a rugged look and does a better job hiding dirt and scratches when compared to a glossy finish.
Since you plan on towing, I recommend the Tekonsha T-One Vehicle... view full answer...
For your 2021 Ford Ranger, I recommend the Curt # C13417 trailer hitch receiver.
When we installed the Curt on a 2020 Ford Ranger we found the center of the receiver pin hole to be 4" from the rear of the bumper. This may come in handy if you are using a hitch mounted accessory and need the additional bumper clearance. This receiver has a maximum tongue weight capacity of 900lbs and trailer capacity of 6,000lbs. With a weight distribution hitch tongue weight capacity remains at 900lbs... view full answer...
That's a good question as there are a few key differences between the retractable hard tonneau covers and the folding hard tonneau covers for your 2021 Ford Ranger. The biggest differences are ease of use, security, and how they impact your bed size. First, here are the part numbers for the RetraxPRO MX and BAKFlip MX4 that fit your 2021 Ford Ranger, depending on its bed size:
- RetraxPRO MX Hard Tonneau Cover - Retractable - 5' Bed # RTX56FR or 6' Bed # RTX36FR
- BAKFlip MX4 Hard Tonneau... view full answer...
The only difference between our etrailer Trailer Hitch Receiver # e63ZR and the Curt # C13417 for your 2023 Ford Ranger is the finish. Our receiver is manufactured by Curt as we selected them for their outstanding quality and attention to detail. While their receiver has a gloss black powder coat finish we have our receiver finished in a matte black powder coat finish. I personally feel the matte black is a better finish which has a more factory appearance.
I recommend installing the... view full answer...
The etrailer and Curt trailer hitches that fit your 2020 Ford Ranger are very similar, with the biggest difference being their finishes. The etrailer Trailer Hitch # e63ZR has a black matte finish and the Curt Trailer Hitch # C13417 has the traditional glossy black finish.
Aside from that, they have the same capacities and each hitch is a relatively simple bolt-on installation using standard tools - a torque wrench, ratchet, socket, socket extension, and C-clamps. The hitches install... view full answer...
The etrailer Hitch # e63ZR and the Curt # C13417 are both confirmed fits for your 2021 Ford Ranger. These hitches are extremely similar with the only significant difference is the finish on the hitches. The etrailer # e63ZR has the new matte black finish and the Curt # C13417 has the traditional glossy black finish. Otherwise, they have the same weight capacities and clearance measurements. I attached review videos of these for you to check out.
The Curt T-Connector Vehicle Wiring... view full answer...
Looking at the Ford Accessories they are using a Redarc Tow-Pro Elite Brake Controller # RED44FR for your 2023 Ford Ranger. The main difference is the Redarc is a stand alone controller while the Ford adds an additional ECU which operates the brakes when either the forward collision or emergency braking is activated. If you do not have these features on your Ranger, it makes no sense to get the Ford kit. If you do have these systems and want the trailer brakes to still activate with those... view full answer...
The Curt hitch part # C13417 and the etrailer part # e63ZR that fit your 2020 Ford Ranger are very similar. They both weigh 34 lbs. Also worth mentioning is that the weight of the hitch does not count against the tongue weight rating of the vehicle as essentially the hitch becomes part of the truck frame. view full answer...
You are not necessarily incorrect about your 2021 Ford Ranger being limited to 3,500 pounds, but there is a caveat to this. The 3,500 pound tow rated is only when you are using the bumper as a hitch. I included a picture showing what I mean by that as well. When using a conventional hitch, like the Curt # C13417 or etrailer # e63ZR, you are looking at a maximum towing capacity of 7,500 pounds. This means you also have 750 pounds of tongue weight and will indeed have a lot more options for... view full answer...
The only difference between the Buyers Products 2-Way Die-Cast Zinc Trailer Connector # 337TC1002 and the Pollak 2-Pole Socket Connector # PK12801 is the brand. Aside from that these are interchangeable. They even fit the same mounting bracket # PK11771. view full answer...
When comparing the etrailer and Curt hitch options for the 2021 Ford Ranger, you will find that they are very similarly constructed, install in the same way and have very little differences in dimensions and rated towing capacities. It is possible to have up to a 7,500 lb. tow rating if you have the factory equipped tow package, code 53R. All other configurations will be rated to a minimum of 3,500 lb. The vehicle specific owner's manual should always be consulted to understand what the... view full answer...
Yes, there is a large difference in weight capacities between those hitch receivers for your 2021 Ford Ranger. I would be happy to break them down and compare them for you.
The Curt Trailer Hitch Receiver item # C13417 is a custom fit for Ford Rangers and will bolt directly to your vehicle without any welding. The Curt has a 30 min estimated installation time. It is a class III hitch receiver with a
Maximum gross trailer weight of 6,000 lbs
Maximum GTW when used with weight distribution... view full answer...
I found very few differences between the Truxedo TruXport # TX250101 and the Extang Express # EX50630. Both covers connect to rails with velcro, install in the truck bed by clamping around the truck bed rail, and feature no-arched bows for an aerodynamic design.
The biggest difference I noticed is in the warranty lengths of the covers. The Express # EX50630 has a lifetime warranty on factory defects, and the Truxedo # TX250101 has a 5-year warranty.
Personally, I prefer the Truxedo... view full answer...
Go To Results