Expert Answers about NuCamp

• Recommended Roof Rack for 2019 Subaru WRX
• I recommend going with the Thule Roof Rack for Subaru WRX that uses the Thule Wingbar Evo # TH711400, Evo Clamp Feet # TH710501 and Fit kit # TH145178 since it's got the aerodynamic Wingbar Evo that will help reduce the wind noise that often accompanies these roof racks. I've linked a video that shows how this rack looks on your 2019 WRX as well as how it will install that you may want to have a look at as well.
  view full answer...


• Picking Out Replacement Hydraulic Pump Motor for 2006 Winnebago Itasca Suncruiser 37B
• There's a very strong possibility the replacement Hydraulic Pump Motor # LC167576 is what you'd need. This is designed as a replacement for the Lippert Replacement Hydraulic Power Unit with 2-Quart Pump Reservoir Kit # LC141111 so if this is what you saw when you check it out that would verify it's what you need. If not let me know if you can find any brand or part number info and we'll see what you'd need.
  view full answer...


• Recommend Disc Brake Kit For 5,200 lb Tandem Axle Trailer
• I do have all the parts that you would need to install disc brakes on your 5,200 lb tandem axle trailer, but not as a kit. First, you will need the Kodiak Disc Brake Kit, part # K2R526S, which is a stainless slip-on disc brake kit. We also have a hub replacement disc brake kit, in a dacromet coating, part # K2HR526D. To use part # KSHR526D, you would need to pull apart your hub and make sure you have the correct bearings, races and seals. You will also need to have a 6 on 5-1/2 bolt pattern...
  view full answer...


• Availability of 4-Way Pivot Head That Will Fit an Older Reese 14K Fifth Wheel Slider
• I spoke with my contact at Reese and he said to get a 4-Way pivot head on your older Reese 14K fifth wheel slider you will need to replace both the head and the center support section. You will need Reese Replacement Head with Crossmember, # RP30047A. This is both the replacement head and the crossmember head support and it will fit the slider legs from your older Reese 14K slider hitch.
  view full answer...


• Availability of Replacement Fan for Derale Dual Radiator Fan-and-Shroud Assembly # D16812
• The Derale High-Output, Dual Radiator Fan-and-Shroud Assembly, part # D16812 is the only electric fan I have in the 25 inch diameter. If one fan goes out it can be replaced with just one fan. The replacement fan will be the Derale 12 Inch High-Output, Electric Radiator Fan, part # D16925. If you wanted a higher CFM dual fan assembly The closest size I would have would be the 26 inch diameter electric fans. I have three of them that have a 4,000 CFM capacity. I am including a link to a...
  view full answer...


• Is there a Direct Fit Electric Fan Kit for a 1987 Chevrolet Pickup
• Direct fit kits are not typically available when swapping from mechanical to electric fans. The best thing to do is measure the backside of your radiator and figure out how much space you have. The kit you were looking at has an overall dimension of 31-3/8 inches wide, 15-3/4 inches tall, and 3-1/4 inches deep. Provided you have enough room for this assembly to fit, it should be able to be installed with no problem. Since you want a fan kit with that is controlled via a thermostatic switch...
  view full answer...


• Can UWS Replacement Lock Assemblies Be Keyed Alike
• I believe the description should have stated one lock cylinder and two keys. You can order two locks that utilize the same key by entering a part number in the search box on the website like the # UWSLOCKCH506. You can order as many lock assemblies as you need that are keyed alike.
  view full answer...


• Do You Carry a 20 X 36 Inch Cargo Carrier with a Capacity of 200 Pounds
• The closest hitch mounted cargo carrier that we offer to the dimensions you give is the Pro Series 20x47 Cargo Carrier, # 63155. This carrier fits 1-1/4 inch trailer hitch receivers and has a weight capacity of 300 lbs. If you have a 2 inch trailer hitch receiver, then you could use the Curt 22-1/2x49 Cargo Carrier, # C18113. This carrier has a maximum weight capacity of 500 lbs and it is made of aluminum. I have attached video reviews of both cargo carriers for you to check out. I...
  view full answer...


• Is There a Dual Friction Sway Control Weight Distribution Head for the Trunnion Style Hitch
• Yes, the weight distribution head has a mounting hole for a sway control ball like the Sway Control Ball, item # RP58060. The weight distribution head included with the Trunnion Style Weight Distribution Hitch System for Titan 2-1/2 inch Receivers, item # RP66006, has the sway control ball on the right side of the head only. There is not a trunnion style head available with two sway control ball mounts available. The best option for sway control with the Trunnion Style Weight Distribution...
  view full answer...


• Fold-Away Hinge Kit for a Trailer with 2 inch By 3 Inch Tongue
• We do have a fold away coupler that will work on your trailer tongue that is 2 inches by 3 inches and that is the Fulton # FHDPB230101. This coupler will install on your trailer tongue and has a cacity of up to 5,000 pounds. Please note that the tongue material thickness must be between 0.188 and 0.120 inches for installation purposes. The fold away coupler that you referenced # FHDPW330300 is intended for use on trailer tongues that are 3 inches by 3 inches and I would not recommend...
  view full answer...


• Rola Roof-Rack System for a 2009 Mazda 3 with 4 doors
• For a 2009 Mazda 3 there are several roof rack options depending on how your vehicle is equipped. For a 4-Door with fixed mounting points with no existing rails or crossbars you can use the Rhino Rack roof racks which is made up of the following parts: # RRVA118B-2, # RRRLKVA, and # DK289. For a 4-Door without fixed mounting points with no existing rails or crossbars you can use the Yakima Roof Rack made up of the following parts: # Y00426, # Y28TR, # Y06143, and # Y06111.
  view full answer...


• Yakima DoubleDown Bike Rack Replacement Anti Sway Cradles
• We have the replacement cradles that you are looking for. They are the Replacement Cradle Set for Yakima DoubleDown Hitch Mounted Bike Carriers, item # Y8890177, and you will receive all the parts needed to secure one bike on the Yakima DoubleDown 4 Bike Carrier, item # Y02424.
  view full answer...


• Availability of Replacement Cradle Pads for the Swagman XP Bike Racks
• Yes, we have the replacement pads you need for the Swagman Fold Down XP 5-Bike Rack, item # S64970. You will need to order the Replacement Top and Bottom Pad for Swagman XP Cradle, item # P160, and you will get a replacement top and bottom pad.
  view full answer...


• Can I Get a 12 Inch Long Reflector Like Part RE10RB
• We do carry a 12 inch long red reflector, part # RFL-12R. It is 12 inches long and 1 inch wide. You could also use 4 of the reflectors you were looking at and that would give you a total length of 12-12/16 inches.
  view full answer...


• Is There a Special Socket Needed to Install Convert a Ball Adapter # CAB-C5G
• I believe you are talking about the square head bolts of the # CAB-C5G. They are annoying but they require a crowfoot wrench adapted to a torque wrench capable of 100 ft lbs. 100 ft lbs is the recommended torque. Convert a Ball has told us in the past that people will sometimes use a large crescent wrench as well.
  view full answer...


• Available RV Lighting for Interior and Exterior Use
• We have a broad range of RV/trailer interior (and exterior) 12V lights like the Gustafson Ceiling Halogen Puck Light # 277-000487 you referenced, and we also offer LED lights which offer the highest-efficiency. Many RV owners replace their standard incandescent bulbs with power-saving LED elements. Our LED replacement "bulbs" are shown on the linked page. Simply find the bulb number on your existing incandescent bulbs and click on that number to see all LED options to replace it. LEDs...
  view full answer...


• Availability of Trailer Wiring Harness for 2013 Kia Forte Koup
• I spoke with my representative at Tow Ready, who tells me that because the Forte Koup is not often used as a tow vehicle, a plug-and-play trailer wiring harness like the # 118431 you mentioned is not offered. For your Forte Koup, a universal fit hardwired harness like the # 119178KIT is recommended. The 118431 fits the 2007-2010 Kia Rondo or the 2010-2012 Kia Soul, but not your Forte Koup.
  view full answer...


• Availability of Replacement Manual Crank Handle for Bulldog Powered A-Frame Trailer Jack
• Are you speaking of a Bulldog Powered A-Frame jack like part # BD500187 or # BD500188? If so, the replacement crank is part # BD500203. If you're speaking of a different jack, I'd be happy to look for a replacement manual crank handle if you could provide the part/model number of the jack you have.
  view full answer...


• Trailer Hitch that is Hidden and Wiring for a 2016 Jeep Cherokee Trailhawk
• I will be happy to help. For your 2016 Jeep Cherokee Trailhawk Curt trailer hitch # C13172 will only have the receiver visible. the rest of the hitch will be out of sight. I have linked a video showing an example installation of this hitch for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,...
  view full answer...


• Trailer Hitch and Wiring for a 2016 Honda HR-V
• Yes, for your 2016 Honda HR-V you can use the Curt trailer hitch # C11416. Ball mount # 3593 is the correct ball mount if you intend to do any light duty towing. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # C56284 to add a 4-Way trailer connector. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with...
  view full answer...