It sounds like you're looking for a hitch for a 2018 Hyundai Elantra Sport GT Hatchback model, and the only hitch available for that vehicle is the Draw-tite # 24905. This hitch has a 1-1/4" Class I receiver that can be used for light duty towing or carrying bike racks.
I've linked our selection of wiring harnesses and ball mounts for this vehicle in the event that you're going to be towing, as well as our entire selection of bike racks that can fit in a 1-1/4" receiver if you don't already... view full answer...
You have two options of a hitch for your 2017 Hyundai Sonata, the Curt Trailer Hitch Receiver, # C11402 and the Draw-Tite Sportframe, # 24965. I prefer the Curt option that is assembled in the USA and noted for having a superior powder coating. Each of these options have the same specs of being a Class I hitch with a 1-1/4" receiver. They are rated for a maximum gross trailer weight of 2,000 lbs. and a maximum tongue weight of 200 lbs. Meaning that the vertical load on these hitch options... view full answer...
Both the Insight CTS, # EP84130, and Insight CS, # EP84030, will allow you to monitor various parameters of performance, but they do not allow you to tune the engine to add horsepower or make any other changes to the factory settings on your 2010 Hyundai Accent.
The data parameters you can monitor include the engine boost, battery voltage, intake air temperature (IAT), exhaust gas temperature (EGT), engine oil pressure (EOP), engine coolant temperature (ECT), engine oil temperature (EOT),... view full answer...
If the plan is to do any towing and there is a 2 inch hitch available that's the way to go. So for your 2017 Hyundai Santa Fe Sport the Curt hitch part # C13152 would be a great option and the best recommendation we can make.
For trailer wiring you'd then want the part # 118571.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop.... view full answer...
We have a range of RV thermometers and weather station products shown on the linked page that provide temperature display and related information like humidity and forecasts but none of these is specifically intended for attachment to a window. For a cost-effective model that gives you both indoor and outdoor temps as well as a clock you might like the TempMinder Indoor and Outdoor Thermometer with Clock # MRI-122AG. view full answer...
If you stay under the 5,000 lb towing capacity of your 2017 Hyundai Santa Fe it will be just fine as that's what Hyundai determined to be a safe amount of weight to tow.
The Curt hitch part # C13153 would be a great option with more than enough capacity as well. It's a confirmed fit for your vehicle. For trailer wiring then you'd want the part # C56184 which is also a confirmed fit. view full answer...
I am sorry but the only base plate we offer for the 2010 Hyundai Genesis Coupe is the Blue Ox kit # BX2332. We have no Roadmaster base plates for this car but there are adapters available to let you use your Roadmaster tow bar with these Blue Ox base plates.
Use part # RM-031 if you have a Blackhawk, Falcon, or Sterling tow bar with serial number up to 16,500.
Use part # RM-031-5 if the serial number is higher.
Pricing is shown on the items' pages and shipping charges can be seen by... view full answer...
Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
I have included a video review of this fender for you to check out. view full answer...
If your 2017 Hyundai Santa Fe Sport with panoramic glass roof has an otherwise normal (bare) roof with no rails or fixtures you can use the Thule WingBar Evo roof rack made of parts # TH711400, # TH710501 and # TH145059. view full answer...
To wire your vehicle for towing, you would use taillight converter hardwire kit, part # 119178KIT. We do not offer a plug-in wiring harness for the 2006 Hyundai Elantra.
The wiring harness would need to be hardwired into your existing taillight circuits. The installation kit includes a circuit tester for determining which taillight circuits feed which function. I have linked you to a trailer wiring FAQ article that you might find helpful.
I have also linked you to an installation video... view full answer...
The Curt hitch part # C13152 that you referenced will also fit your 2016 Hyundai Santa Fe but you will need new install hardware since it is considered one time use. For that you will need part # RHK.
For trailer wiring you would want the part # C56332. If that is what you had on your 14 then it would also fit the 16 model. view full answer...
You can install the Curt hitch part # C13152 on a vehicle like your 2017 Hyundai Santa Fe without needing a jack or lift to raise the vehicle any higher. The vehicle has enough ground clearance to not require the added lift. We use a lift in our install videos as it makes it much easier to show the install process which is also the case in the install instructions link which I attached to this page. view full answer...
The bolts in the Thule Fit Kit for Podium Style Foot Pack 3068 # THKIT3068 are not available separately. I wish they would piece everything out like that but they don't. Those bolts are exclusive to that kit. view full answer...
We do have chains for tire size 195/65-15. I have included a link to the available chains below. They may not have appeared by searching the vehicle if the 15 inch rim was not an original or widely used option. You will want to check the owners manual for your 2008 Hyundai Elantra to determine if chains can be used and if there is a specific class rating or minimum clearance required when using chains. I have included a link to our tire chain FAQ article below that contains a lot of good... view full answer...
Although they are not specifically made for your Curt T-Connector Vehicle Wiring Harness # C99KR, we do have diodes available. You can use the Roadmaster Single Park Light Diode # RM-690 to do what Curt has described to prevent feedback. view full answer...
To add trailer wiring to your 2013 Hyundai Veloster you will need wiring harness # C59496. I have included a link to the installation instructions for you. view full answer...
In the 2019 Hyundai Santa Fe Ultimate without the tow package you can use Curt universal hardwire 4-pole kit # C59236. I confirmed compatibility with my tech contact at Curt. At the present time (March 2019) this is the only hardwire option confirmed for the vehicle.
Please refer to the linked review and installation videos for more details on operation and installation. view full answer...
All roof racks currently made for your 2018 Hyundai Ioniq, shown on the linked page, consist of two crossbars and the related foot assemblies.
But since you have a hitch support like the Malone Axis # MPG907 to hold one end of your canoe I do have a good solution for you that will cost much less.
We offer canoe carriers that do not require any roof rack crossbar. These cost-effective carriers include items like the Malone Canoe Carrier with Tie-Downs # MPG156. This kit includes 4 foam... view full answer...
I spoke with my contact at Thule, the manufacturer of the Sears Roof X-Cargo Carrier, and you will need Replacement U-Bolt, # TH02943. These are sold individually so you would need to order a quantity of four. view full answer...
Go To Results