bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Honda Accord


  • How to Order Replacement Install Hardware for Trailer Hitch for 2007 Honda Accord
  • There are two Curt hitches available for your 2007 Honda Accord. Either the part # C11290 or the # C11327. You would need to compare the product pictures of either to determine which you have. To order replacement hardware for either of these hitches (or any hitch actually) you need part # RHK. You will need to select the manufacturer of the hitch from the drop down menu and then enter the part number for the hitch in the window.
    view full answer...

  • Availability of Trailer Hitch for 2009 Honda Accord to Allow Use of 2-inch Hitch Bike Rack
  • The size and class of hitch available for your 2009 Honda Accord is a 1-1/4-inch Class I hitch such as Curt # C11085 or # C11496. No 2-inch hitches are made for your car because its frame is not strong enough for the weight ratings of a 2-inch Class III hitch. As you noted, there are adapters like the Brophy # HTAD and # HT5R that fit your 1-1/4-inch hitch and provide a 2-inch receiver opening for the 2-inch accessory. These are both about 7-inches long, a good bit shorter than the 12-inch...
    view full answer...

  • Availability of Furrion Camera for RV with Furrion Pre-Wiring
  • For just the camera of a Furrion Vision S system you'd want the part # FCN48TASF but if you also needed a monitor inside your tow vehicle you'd want the # FOS43TASF which comes with the camera and a 4.3 inch monitor.
    view full answer...

  • Need a Portable Device to Jumpstart 2004 Honda Accord
  • A dead battery is almost no fun at all. And most charging products are not as portable as we'd like them to be. But one product that can go with you on the road is the Wagan JumpBoost V10 Air # WC7556. This handy portable device can be used to jump-start your car or charge or power electronic devices.
    view full answer...

  • Availability Of Trunk-Mounted Bike Rack For 2021 Honda Accord Sedan Hybrid
  • Yes we do have trunk-mounted bike racks that fit your 2021 Honda Accord Sedan Hybrid. While Thule does not make any trunk bike racks that are confirmed to fit your vehicle, I do recommend looking into the Saris Bones 2 Bike Rack - Trunk Mount - Adjustable Arms # SA805BL. This is one of the nicer trunk bike racks and it is designed to fit vehicles that could have a rear spoiler. It can safely carry 2 bikes weighing up to 35lbs each. The Saris Bones is easily adjusted to accommodate many...
    view full answer...

  • Availability of Fairing for Rhino-Rack ROC25 Roof Rack on 2006 Honda Accord Sedan
  • Yes, the Rhino-Rack ROC25 Roof Rack, part # RR65FR, is designed to fit your 2006 Honda Accord 4-Door with no existing rails or crossbars. I am including a link to the installation instructions on the Rola roof rack. The Rhino-Rack Fairing that you referenced, # RRRF2, will fit the elliptical crossbars and would work well for you.
    view full answer...

  • Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Honda Accord
  • The Draw-Tite Sportframe Trailer Hitch Receiver # DT86PR is custom fit for you 2024 Honda Accord. This class I receiver has a 1-1/4" opening for a Ball Mount # 3593 or hitch mounted accessory. I recommend installing the T-One Vehicle Wiring Harness # 118776 when you install the receiver. This will give you a 4-way flat connector which is the most common connector found on small trailers. It also allows for Auxiliary Lights # C53201 should your hitch mounted accessory impair the view of...
    view full answer...

  • Hood Bug Shield Fit for a 2016 Honda Accord
  • The WeatherTech Bug Shield part # WT50254 would be the correct bug shield for you to use on your 2016 Honda Accord Sedan. There would be no permanent modifications required to install this on your vehicle either.
    view full answer...

  • What Size Trailer Hitch is Available For 2012 Honda Accord
  • None of the hitch manufacturers will make a 2-inch hitch receiver for a 2012 Honda Accord. Most of the 2012 Honda Accords will only have a towing capacity of 1,000 lbs so the vehicle would not be able to use a Class III 2-inch hitch. The frame attachment points on the Accord are not strong enough to withstand the increased weight capacity that a Class III hitch can handle, therefore the manufacturers do not offer them. The hitches that are available for your 2012 Honda Accord will be a...
    view full answer...

  • Lower Priced Roof Rack for 2006 Honda Accord for Thule Hullavator
  • The price of the Sportrack roof racks makes them very tempting but due to our experiences with them I don't ever recommend them. Since they are semi-custom and were intended to fit as many vehicles as possible we've found that more often than not they don't fit very well and would not be the best choice for a Hullavator # TH898 which due to it's design really does not a very solid base to fit and work well. For a similar square bar rack that is much higher in quality, is custom fit for...
    view full answer...

  • Anti-rattle Devices for Use With 1-1/4-Inch to 2-Inch Hitch Adapter on Curt Hitch # C11681
  • Thank you for your recent purchase from etrailer.com. All of the hitches offered for your 2014 Honda Accord, including the Curt # C11681 you chose, are light-duty Class I types that have a maximum bike carrying capacity of 2 bikes - even if the carrier itself can hold 3. You might care to refer to the linked article on hitch classes. A further complication in your situation is that use of a hitch adapter - any adapter or extender - will have the unavoidable side-effect of reducing the...
    view full answer...

  • Available Wheel Lug Lock Set for 1/2-Inch Wheel Bolts
  • We do not offer a 4-piece wheel lug lock set specifically for the 2014 Honda Accord but we do offer the 2-piece Redline kit # RG01-150 which consists of 2 locks for 1/2-inch wheel bolts along with 1 key. Please refer to the two linked review videos for details on this kit.
    view full answer...

  • Recommended Adapter to Convert 7-Way Blade Connector to 5-Pole Flat Connector
  • We offer a range of trailer wiring adapters to let you join a vehicle with one connector type to a trailer with a different connector. The link provided will show you all options for adapters that convert from a 7-way blade-style connector to a 5-pole flat style connector. You can use a non-wired plug-type adapter like Optronics # A75TB, or if you prefer a wired-type adapter to give you a bit of slack you can use Optronics' 16-inch adapter # A57WB. For a heavy-duty coiled adapter you might...
    view full answer...

  • What Fairing Options Are Available for the SportRack Roof Rack for 2005 Honda Accord SR1002
  • The SportRack Roof Rack for the 2005 Honda Accord, part # SR1002, fits your 4-door sedan. SportRack does not offer fairings for their roof rack systems. I checked with my contact at Thule and they advised that the SportRack square crossbars have dimensions that make them incompatible with the hardware supplied with Thule fairings. Just to be absolutely certain I did test-fit a Thule fairing on the SportRack crossbar. As Thule advised, and by a very small margin, the hardware will not...
    view full answer...

  • Floor Mat Options For 2022 Honda Civic
  • I have a solution for you, but I did confirm with WeatherTech that there currently are not any floor mats custom-fit for the 2022 Honda Civic and the Honda Accord mats likely will not be a great fit. They did say they are working on the 2022 Honda Civic floor mats so feel free to check back in the near future to verify availability. If you are looking for a great option now, I would look into the WeatherTech All-Vehicle Mat Auto Floor Liners - Front and Rear # 61-11AVMOTHSG. These mats...
    view full answer...

  • Availability of Class II Trailer Hitch for 2000 Honda Accord EX to Carry 4 Bikes
  • Since there are only Class I hitches available for your 2000 Honda Accord you're going to be limited to carrying 2 bikes using the trailer hitch method, even if you were to try using an adapter. If there was a Class II hitch available I would still advise against going this route because a hitch adapter will reduce your weight capacity by 50%. For your application I recommend using the Inno roof rack system with a roof mount bike rack like the Inno Fork Lock III # INA391. Obviously you'll...
    view full answer...

  • Availability of Longer Length Locking Hitch Pin for 1-1/4 Inch Hitch
  • We have a few hitch locks that have a longer span than 2-3/8 inches, but none of them offer an anti-rattle function. I'll list them below for you: Tow Ready # 5200, 3-1/8 inch span Tow Ready # TR63254, 3-1/2 inch span
    view full answer...

  • Trailer Hitch Recommendation for 2011 Honda Accord Sedan
  • The hitch we have available for your Accord is a Class I hitch, Curt Class I hitch, part # C11496. If you'll be towing, you'll also need the # 118420 trailer wiring harness, a ball mount and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball # 19258. None of the hitch manufacturers we do business with offer a 2 inch hitch for a Honda Accord. The portion of the vehicle that the hitch bolts to isn't capable of withstanding the type of capacities the Class III 2 inch receiver can...
    view full answer...

  • Is There a Trailer Hitch for a 2022 Honda Accord
  • Yes, we have a hitch for your 2022 Honda Accord. The Curt Trailer Hitch Receiver # C11525 is confirmed to fit the 2022 Honda Accord as long as it is not a hybrid. This hitch is made in the USA and will require some drilling for installation. Once installed this hitch will provide you with a Class 1, 1-1/4" receiver to use hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you are getting this hitch for a bike rack you will want to ensure the bike rack is Class...
    view full answer...

  • Available Types of Trailer Coupler Locks
  • We do offer coupler locks that allow you to secure an unhitched trailer. These can be seen on the linked page. These locks include types like the EZ Lock Trailer Coupler Lock # BLTL-20 which works along with a pad lock that you supply, such as # ML40D. We do not offer any lock products intended to secure a hitch ball to a ball mount. Usually hitch balls will be torqued (according to the manufacturer's instructions) to a degree that would make it hard to unscrew the nut that holds the ball...
    view full answer...