We do not have any updates from our Vendors for offerings of slip-on towing mirrors custom fit for the 2021 Ford F-150. We still have the universal fit available, the K-Source Universal Towing Mirrors, # KS3891-2 is a confirmed fitting tow mirror for 2021 Ford F-150's and my preferred option. view full answer...
We have two different camera systems that would replace the 3rd brake lamp assembly on the rear of your cab that would indeed utilize the factory display in the dash. The correct system for you will depend on if you have the 8 inch or the 4.2 inch monitor (measured diagonally). If you have the 8 inch monitor, use # 3460001 or # 3460002 if you have the 4.2 inch monitor.
This being said, this part will only work if your truck has the rear-view camera at the rear of the truck. If it does... view full answer...
The best way to choose a weight distribution system is based off the tongue weight of your trailer; ideally it will fall right in the middle of the prescribed tongue weight range of the system.
Based off of the 504-lbs tongue weight you've measured, the Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW # RP66558 is a great choice and a much better fit than your 400/4000-lbs rated system. I really like that the Steadi-Flex is easy to install and,... view full answer...
You can always expect a reply from us here at Etrailer! I have a solution for you, however, there unfortunately is not a roof rack custom-made for the 2010 Ford Ranger standard cab. Instead, there are two routes that come to mind for you to haul your kayak on the roof.
Option 1: Thule TracRac TracONE Ladder Rack w/ Cantilever - Fixed Mount - 800 lbs - Silver # TH27000XT-EX. This is a ladder rack with a cantilever that hangs over the roof, acting as a roof rack. With the three crossbars,... view full answer...
Since you need to retain the use of the 7-way at your rear bumper for towing while having the same lighting signals available near the cab for your headache rack, one option to consider is using a 5th wheel harness such as # 41157 from Hopkins.
This plug-in harness provides on one end dual round U.S. Car connectors in a Y-arrangement that allow you to tap into your existing 7-Way (while keeping all of its functions active for your tow rig). On the other end of the 8-foot cable is a standard... view full answer...
Actually all you need to install a brake controller in your 2010 Ford E-350 Van is the correct install harness part # 3034-P. Basically this plugs into the back of your brake controller and then plugs into the port under the dash of the van.
If you watch the install video attached you can see a van just like yours having a brake controller installed. view full answer...
All of the RV-rated trailer hitches we offer are the 2-inch size and the highest-rated among them are the adjustable frame-mount types like Curt # C13701. This hitch offers 2-inches of drop for its receiver tube to allow for better clearance with the RV exterior. The B&W custom hitch you referenced, part # BWHDRH25122, is not a fit for your F-53-based Mirada and only adjustable universal-fit hitches like the Curt BWHDRH25122are available.
The Curt hitch is rated for 5K GTW and it can be... view full answer...
Yes, we do offer a tailgate lift assist kit for your 2013 Ford F-350. You can use DeeZee Tailgate Assist # DZ43203 which is a custom-fit product made for your F-350. The Lift Assist installs without drilling using included hardware, as shown in the video I linked for you. view full answer...
For your 2017 Ford Expedition EL we can offer you several options in universal-fit towing mirrors.
In a clip-on style we have K-Source 2-mirror kit # KS3891-2 which offer adjustability and a good fit on any mirror that has a gap between the housing and the glass surface. Please see the video I linked for you to see more details on these popular towing mirrors.
For a trailer as long as your 36-footer you might prefer a door-mount mirror like # 11650 from CIPA. These will give you a wider... view full answer...
Reese offers the # RP30156 Underbed Rail Adapter that's exactly what you'll need so you can continue using your existing Reese 5th wheel hitch. The adapter will drop into the existing pucks (a small height adjustment to the adapter might be needed) and then lock into place. You'd then attach your Reese Hitch to the adapter, just like you would to regular bed mounted fifth wheel mounting rails. If you'll watch the included video, you can see how the adapter works.
If you don't already have... view full answer...
The closest offering we have would be the Torklift Power Armor Locking Battery Box, part # TLA7708R which measures 8-3/16 x 23 x 13. If you were to take an angle grinder and take a small bit of material off of one of the rails, the box could be made to fit pretty easily. Other than the 60 inch # TLA7710R box you mentioned, this is your best bet for a metal locking box. I've linked you to a product description video featuring the battery box I mentioned above. view full answer...
The connectors from any trailer wiring harness are not available by themselves. You could buy the harness and cut them off but if you were to buy it you might as well install that one and return the hardwire harness to the dealer.
Or I could help you install the hardwire harness. It is actually pretty easy. You just need a circuit tester such as # PTW2993 to test the vehicle tail light wiring. On the driver side you will need to find the left turn signal wire and the running light wire.... view full answer...
The Ford Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black # AUT-FOR-RB that you mentioned is actually made of stainless steel all around, including the front. You can also get this in a silver version with the highlighted Ford logo: Ford Trailer Hitch Cover - 2" Hitches - Stainless Steel - Brushed # AUT-FOR-S.
A few other variations of stainless steel Ford hitch covers are the Ford F-250 Trailer Hitch Cover - 2" Hitches - Stainless Steel - Brushed # AUT-F252-S and Ford... view full answer...
If you knew for sure that you'd never need the ability to make a super tight turn you might be okay with a standard slider and a truck bed that is 5-1/2 feet long. But for most people it's just not possible and a Sidewinder will be the best route. Since your pin box is an RBW 7028 the correct Sidewinder is the part # RP61412.
Using a custom wedge will make using the Sidewinder easier too. The correct one is the part # 30850. This is highly recommended over the universal wedge. In general... view full answer...
We offer two front-mount hitches for your 2008 Ford F-350 Cab and Chassis that can be seen using the link provided. Both the Curt # C31008 and the Draw-Tite # 65049 feature the same 500-lb vertical load and 9000-lb pull capacities and both install without drilling or welding using included hardware. Both will require some trimming of the vehicle's front fascia.
I have linked you to the written instructions for both hitches as well as to a video showing the Draw-Tite being installed on... view full answer...
You will need to use a universal towing mirror like the Dual-View Clip-On Towing Mirror # 11953. These mirrors are made to work with side mirrors that have an outer plastic housing separate from the actual mirror. The clips will adhere to the plastic housing of the mirror, and there is a strap that will cross the back of the mirror to clamp the towing mirror to your original mirror. I have attached a review video for this product for you to check out.
I also attached a page that shows... view full answer...
The 7-way wiring harness kits offered for your 2008 Ford F-150 are shown on the linked page and all include both the wiring harness portion and the trailer connector as well, such as PK11893-11932 from Pollak. Both of these use a standard round U.S. Car connector. The part you referenced, # 118247, uses two OEM connectors and is a fit for 2004 model year trucks but not for your 2008 F-150. view full answer...
Good news! The Sumo Spring part number for your Motorhome that you are looking for # SSR-187-54-1 can be found right here on our website. I have included a link to the part on this page for your convenience. view full answer...
The part you need is the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System, part # FR47FR. It is compatible with your Furrion S wireless RV camera system.
I have included a product description link and a video review link below. view full answer...
There is another solution, but unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available for the 4220 and 4820 jacks. There is a strong likelihood the jack would fail if used on a different jack/model.
The reason it will not work for your 4160... view full answer...
Go To Results