I have a solution for you, however, the Draw-Tite Class III Trailer Hitch, # 75940, will not work on the 2018 Audi SQ5.
The Draw-Tite Class III Max Frame Trailer Receiver Hitch, # 76183, is the confirmed hitch for the 2018 Audi SQ5. This Draw-Tite hitch is designed to fit your Audi with no drilling required to install on the frame of the vehicle. This hitch has a 2 x 2 inch receiver opening and has a 750 lbs tongue weight capacity.
Installation of the this hitch will require the temporary... view full answer...
I spoke to a representative from Konig and I was informed they do not have a lug nut adapter larger than 21mm for the Konig Premium Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - K-Summit XL - Size K55, part # th02230k55. You can still go with the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Diamond Pattern - D Link - Easy Fit SUV - Size 247, part # TH04115247. These tire chains are Class S compatible, so they will fit wheel wells with tight space tolerances. In addition,... view full answer...
According to Thule, the # TH711420 53 inch WingBar Evo crossbars are the longest crossbars that will work on your vehicle. Thule crossbars have a slot in the underside that the roof rack feet fit into. The slots don't run all the way across the bottom of the crossbar, so if you go too long with the crossbars, the feet won't match up with the slots.
Yakima offers JetStream crossbar that would allow longer (60 inch) bars. If you wanted to go that route, you'd use the # Y00426 bars. You'd... view full answer...
Draw-Tite has just released their Class III/IV # 75940 receiver hitch, so it is available for order.
If you'll be towing with your hitch, you might need the following to complete your towing system:
Ball mount, part # C45010
1-7/8 inch trailer ball, part # 19260
2 inch trailer ball, part # 63845
The trailer ball you need will depend on the coupler of the trailer you tow. The necessary ball size should be stamped into the coupler itself.
You'll need to obtain the trailer wiring harness... view full answer...
We have a hitch that will fit the Audi A4 Avant Wagon, Including Quattro models. The Curt Class I Trailer Hitch Receiver item # C11195, is the correct hitch for your vehicle. view full answer...
For a white motion detector light I recommend the Solar Powered LED Porch Light for RVs # DG0168. This light has both motion detection sensor mode and dusk to dawn sensor mode to provide lighting, safety, and security. It is solar powered so you won't have to run any wires and has long-lasting SMD LEDs to create a bright, solid panel of light. view full answer...
Trailer couplers like the Dutton-Lainson # DL13847 that you referenced, which fits 2-inch balls, are available in two other sizes, 1-7/8-inches and 2-5/16-inches. We do not offer any couplers that fit a 2-1/2-inch ball and I could not find any information about this size. It is certainly not in common use today or in recent years.
For reference I have linked our main page for couplers, including all three sizes: 1-7/8-inch, 2-inch and 2-5/16-inch. Perhaps it may be that you actually have... view full answer...
We can offer you lots of choices in roof-rack-mount bike carriers for use on your 2015 Audi S3. Before you commit to a dealer-installed OEM type rack you might want to consider one of the aftermarket systems shown on the linked page. Options include round, square and aero-style crossbars and racks systems for your S3 are available from quality brands like Yakima and Thule.
Often the aftermarket racks will be priced much lower than OEM alternatives, just something to consider unless you're... view full answer...
We have trailer wiring options for the 2013 Audi Q5 both with and without the factory tow package. All of these appear on the page I linked for you and they include both hardwired 4-pole flat wiring kits such as the Tekonsha ZCI no-splice 4-pole kit # 119250KIT (which is for the Q5 without tow package). This product provides basic trailer lighting functions. There is no actual plug-and-play T-Connector kit for your car.
The ZCI harness uses magnetic sensors to detect signals in the car's... view full answer...
We do offer a range of universal-fit towing mirrors that will work on your 2012 Audi Q7 but no custom-fit types are available. The link provided will let you see all clip-on, door-mount and fender-mount types. A great example of a clip-on type is the K-Source # KS3891 which is a single mirror (you'll need two to equip both sides of your Q7) with a mirror surface that measures 7-3/4-inches tall x 5-1/8-inches wide. view full answer...
Yes, the trailer wiring harness part # HM48925 is a confirmed fit for your 2003 Audi A6. This is a universal style harness though which will require you to test the wiring of your taillights and wire to the # HM48925 accordingly. view full answer...
The Pewag Servo RS Self-Tensioning Snow Tire Chains # PWRS80 are not a fit for your 255/40R19 tires. There are not any Pewag options available for your specific tire size other than their lower end Glacier Chains made of low-carbon steel instead of the titanium alloy steel of the chains you mentioned.
I recommend checking your owners manual for any specifics regarding tire chain limitations. I tried to check for you but Audi requires a VIN number to view the manuals online.
I have... view full answer...
If your 2008 Audi Q7 did not come with a tow package trailer connector from the factory you can use the Curt wiring harness # C59236 which is shown in the linked review video. The written instructions are also linked.
Installation of this or any wiring harness will be simplified by use of a circuit tester such as # PTW2993 to confirm the function carried by each vehicle wire before making connections to the harness. The linked video illustrates use of the tester. I also linked a helpful... view full answer...
I may have a solution for you if you're just looking to carry bikes, but there are unfortunately not hitches that have been designed to fit on the 2016 A3 e-Tron. However, the Yakima Fullback # Y02633 is designed to fit a variety of vehicles and has been confirmed to fit on the 2016 Audi A3 e-Tron and would allow you to carry up to 3 bikes. The Fullback is a great solution that has adjustable arms to help keep the bikes level and comes with locks to secure the bikes and the rack to the... view full answer...
We don't have any fit info for a 2018 Q5 (as of 5-2017, but see below for updated hitch info!). As soon as we do though it will be on our site as we are pretty good at getting the fit info up quick. view full answer...
You can install a hitch like the Draw-Tite # DT68MR, which is a Class III hitch with a 2" receiver that will allow you to carry your Thule bike rack; a 2" receiver is ideal for towing as well, so you'll be well prepared if the need arises in the future.
I've linked our entire selection of trailer wiring harnesses for your Q3 in case you wanted to be proactive on the towing parts. You'll also need a ball mount, hitch ball, hitch pin and clip; you could piece everything together or just... view full answer...
The Draw-Tite Max Frame Trailer Hitch, # 75218, is the confirmed fit hitch for your 2015 Audi Q3. The hitch does have a tongue weight rating of 450 lbs and you will not need to use a stabilization strap on the Draw-Tite product.
The only permanent modification you will do to your Audi Q3 is when installing the hitch you will need to trim 3-1/2 x 3-1/2 inch hole in the bumper fascia so the receiver tube will be accessible.
I check the owner's manual for the 2015 Q3 and it states that your... view full answer...
We can help you with a roof rack for your 2015 Audi A7 but there are no hitch fits for the TDI.
The Thule roof rack system we offer is meant for the Sportback version with no existing rails or crossbars on the roof. For this vehicle we offer a square bar rack from Thule that is made of parts # TH712200, # TH710501 and # TH145102. view full answer...
The # 391AUDA417 for Stealth Hitches is a custom fit - 2" hitch for the 2017 Audi A4. This hitch will work with the Thule Helium Pro 3 Bike Rack for 1-1/4" and 2" Hitches, # TH9043PRO. The # 391AUDA417 Stealth Hitch has a 350 lb. TW so you will be able to take full advantage of the max capability of the Thule Helium Pro 3. view full answer...
The Tekonsha Replacement Brake Control Harness, part # 20127 would wire up to your OEM harness and plug into your Prodigy brake controller. I do not have any details on the wire functions for your OEM harness, but the replacement harness is wired as follows:
Red Wire = Brake Stoplight Switch
White Wire = Ground
Black Wire = 12-Volt Power
Blue Wire = Brake Controller Output
I'd recommend using a circuit tester like # PTW2993 on the factory wiring to verify... view full answer...
Go To Results