Hey Matt, to get replacement hardware for your Curt Front Mount Trailer Hitch Receiver # C31071 you're just going to need to need to order the Replacement Hardware Kit for Trailer Hitches # RHK and enter "C31071" in the hitch item number box. view full answer...
Hey Bill, so we don't have a direct solution for relocating the fog lights of your 2006 Ford F-250 with the Draw Tite front hitch part # 65022 installed but if you check out the attached picture you can see a customer of ours who had some aftermarket lights attached to his lower bumper. Hopefully that is at least somewhat helpful. view full answer...
Here's the pairing process for the WiSight camera kit for you to try:
PAIRING PROCESS
This system contains an Auto-Pairing function. If your monitor is not receiving a signal from the camera; the two may not be paired correctly.
1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance lights turned off).
2. Press the SEL/PAIR button on the front of the monitor expected mode & select the appropriate AV source.
3. Press... view full answer...
Yes, the etrailer Trailer Hitch Receiver # e98837 that fits your 2007 Toyota Sienna will also fit the 2011 model.
If you plan on reinstalling this hitch then you'll also need to pick up some replacement hardware # RHK since hitch hardware is only meant to be installed once.
Attached is an installation video of this hitch on a 2011 Sienna for your reference! view full answer...
I checked with Swift Hitch and from what you're describing it does sound like the monitor has gone out on the Swift Hitch Wireless Hitch Alignment Camera and Monitor item # 04928.
The only internal replacement part for the monitor is a battery item # PB01. You can replace the entire monitor with item # SH01R. view full answer...
Hello Kevin. I am sorry to say that we do not offer replacement keys for the Anti-Rattle Trailer Hitch Receiver Lock # 63232. Your best bet would be to contact the manufacturer directly with your key number. They should be able to help you get some new keys. That or you could have a locksmith make you a few duplicates. view full answer...
We do indeed have replacement hardware for the Curt Trailer Hitch Receiver # C11391; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter "C11391" in the "Hitch Item Number" box and you're set. view full answer...
Hi Mike,
There are not replacement keys for the Roadmaster hitch lock, so the best I can offer is having that one cut off and replacing it with a hitch lock you will be able to get replacements for (or just get extras), the etrailer Hitch Receiver Lock # e98881. view full answer...
Hi Sharyn; I'm sorry to say replacement keys are not available for the lock. You would have to replace it with the Tow Ready Trailer Hitch Receiver Lock # 5201. view full answer...
We do indeed have replacement hardware for the Curt Trailer Hitch Receiver # C11418 that fits your VEHICLE; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter the hitch product number in the "Hitch Item Number" box and you're set. If you aren't sure what product number your hitch is, I've added a link below to all the hitch fits for a '24 Crosstrek. view full answer...
Hi Vincent,
We do have replacement hardware for the Curt Trailer Hitch Receiver # C13363 for a Jeep Compass; what you will need is the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter "C13363" in the "Hitch Item Number" box and you're set. view full answer...
Hey Paul thanks for the picture, from the looks of it we don't have a direct OEM replacement but you could just as easily use the etrailer Trailer Hitch Receiver # e47KR. You'd just need to remove the old hitch and bolt on the new hitch using the existing hardware. view full answer...
Yes, you can get replacement hardware for your Etrailer trailer hitch receiver # e79YR so that you can get it installed on your 2019 Nissan Rogue. You will just go to this product page # RHK and type in the hitch part number e79YR and then add to your cart! view full answer...
The only way to get the bolts for your Draw-Tite Max-Frame Trailer Hitch Receiver # 75908 is to buy the replacement hardware kit # RHK which would include all the hardware. view full answer...
Hello Mark. The only way to get replacement keys for a Curt 23518 hitch lock is if you happen to know they key number. The problem with this is the key number is printed on the key itself, so unless you happen to have the key number written down somewhere, you are out of luck. The only option would be to find a way to forcibly remove the lock. Either cut it off with a grinder or drill out the lock core until it comes off. Then you will need to replace it with a new one. We do not carry... view full answer...
Hey Lou, so we have two replacement parts that reference the number 31013. We have the winch stand part # CE31013G and the Curt front hitch # C31013. Do you have something different? view full answer...
Hey Steven, I too would really hope that a lock like the # 1480DAT from the Master Lock brand would last longer than 12 months. My only suggestion would be to maybe try some WD-40 and a small wire brush to see if you can get any to penetrate the inside of the lock. If possible, rotate the lock so that gravity will also help the WD-40 get down into the core.
If all of that fails, this lock does come with a lifetime warranty. If you contact customer service they can help get a replacement... view full answer...