bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Lexus


  • Recommended Roof Rack for 2016 Lexus RX 350 With Flush Factory Rails for Roof Top Tent
  • For your 2016 Lexus RX 350 with factory with flush mounted rails that run front to back, I suggest the Rhino-Rack Vortex Aero Crossbars, # RRVA137S-2 mounted with the Rhino-Rack SX Series Legs, # RR37QX. This will provide a dynamic weight/moving load capacity of up to 165 lbs. so this meets the need of your Roof Top Tent. When used stationary or static they will accommodate higher weights. When used in this fashion with a roof top tent the vehicles roof is typically going to be the weakest...
    view full answer...

  • Brake Controller Port For Tekonsha Wiring Adapter 3040-P on 2009 Lexus LX 570
  • Based on what I found online, you are correct the brake controller port is not to the left of the steering column on your 2009 Lexus LX 570. We haven't done any installs with this vehicle, but I did some digging and what I found was that to access the port you will need to remove the lower dash panel, and the connector should be just up and to the right, taped to other wiring so it may be a chore to find, but once you do this will allow you to use the wiring adapter: - Tekonsha Plug-In...
    view full answer...

  • Is There A Rhino Rack Pioneer Platform For a 2023 Lexus GX 460 With Factory Crossbars?
  • Since you already have the crossbars on your 2023 Lexus GX 460 you would need to use either the 58" Long x 47" Wide # RR42115BF or 48" Long x 38" Wide # RR42114BF which will fit a crossbar up to 3" wide and 1-1/2" tall. You will want to verify this matches your crossbar as we do not have the dimensions off your factory bars. The Platform # RR42TB you found will only mount using a specific fit kit which Rhino-Rack currently does not show available for your Lexus or you would have to have...
    view full answer...

  • Recommended Anti-Rattle Lock for Yakima EXO Swing Away Enclosed Cargo Carrier
  • I would love to but the Yakima EXO Swing Away Enclosed Cargo Carrier item # Y74ZR you purchased already comes with a locking anti-rattle hitch pin. It does a great job of reducing rattle and also secures the system to your hitch.
    view full answer...

  • Bike Rack Recommendation for 2011 Lexus CT 200h with Curt Class I Hitch
  • Hey Michelle, the Hollywood Racks Destination bike rack part # HLY94FR that you referenced is a really great bike rack that is compatible with Class I hitches like the Curt part # C11200 that you have installed on your 2011 Lexus CT 200H. It's very lightweight, easy to use, and also stable on the road too at a great price.
    view full answer...

  • Trailer Brake Controller for a 2018 Lexus GX 460
  • We have several brake controllers to use with your 2018 Lexus GX 460. I recommend the Tekonsha Primus IQ, part # TK90160. This hooks up to your brake controller harness using the custom wiring adapter, part # 3040-P. Without knowing what kind of dash plate you have or it's dimensions, I cannot say if this controller will fit with it. I've linked to a video installation of this controller so you can see if it can install the way you want it. If you don't have the prep package for your...
    view full answer...

  • Do You Have a Hitch for a 2021 Lexus RX 350 F-Sport?
  • Yes, we do! The Hidden Hitch by Draw-Tite Hitch item # DT58GR you were looking at actually fits both the F-Sport and standard model of the 2021 Lexus RX 350. This hitch is custom fit and bolts to your Lexus with included hardware. I really like this hitch because the 2" receiver is detachable and the crossbar installs behind your rear bumper. This means you won't be able to see it when you're not towing or using the receiver for an accessory. If you are planning on towing you will also...
    view full answer...

  • Hardware Torque Requirements for the Curt Trailer Hitch Receiver C11372
  • Hey Daniel, according to Curt all M12 hardware for the Curt Trailer Hitch Receiver # C11372 needs to be torqued to 79 ft.-lbs.
    view full answer...

  • Redarc Tow-Pro Elite Brake Control Plug in Adapter for 2019 Lexus GX460
  • For your 2019 Lexus GX460 you are going to need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - Toyota item # 3040-S. This is the wiring harness for the Redarc Tow-Pro Elite Trailer Brake Controller item # RED44FR you referred to. This will plug directly into that plug in your picture.
    view full answer...

  • Is the Redarc Tow-Pro Elite Brake Controller Compatible with a 2017 Lexus GX 460 Factory Tow Package
  • Thanks for reaching out, Neil! Yes, the Redarc Tow-Pro Elite Brake Controller # RED44FR is compatible with your 2017 Lexus GX 460. Since your vehicle has the factory tow package I recommend picking up the Curt Custom Wiring Adapter # C51362 and cutting off the black connector then splicing the universal wiring pigtail from the Redarc to the adapter so you get a plug-and-play setup.
    view full answer...

  • Brake Controller Wiring Harness with a Adjustment Knob for 2017 Lexus GX460
  • I would be happy to recommend a brake controller with a control knob for your 2017 Lexus GX460. We have two options for wiring harnesses for your vehicle depending on the whether or not your Lexus has the towing package. I recommend the Redarc Tow-Pro Elite Trailer Brake Controller item # RED44FR. This is a proportional brake controller with an adjustment knob that can be installed anywhere on your vehicles dash or console. If your vehicle does not have the tow package you will need to...
    view full answer...

  • Suspension Enhancements And Weigh Distribution System For 2017 Lexus GX460
  • I have a solution for your towing needs, however, there are currently no air suspension options for your 2017 Lexus GX460. If you are wanting to extend the life of your vehicle's suspension and reduce body roll, I would look into rear suspension enhancement. I recommend the Timbren Rear Suspension Enhancement System # TTORSEQ. The hollow rubber springs sit above the rear axle to help level your vehicle and absorb shock, providing a much safer and more stable ride when hauling heavy loads....
    view full answer...

  • Can 2024 Lexus RX 350H Have Hitch Installed to Carry Bike Rack
  • Hey Frank, so we do have to recommend you stick with what Lexus recommends for your 2024 Lexus RX 350h in regards to installing a hitch like the Curt part # C29VV that is a fit for it but there are several people who have used this hitch to carry a bike rack like the Kuat Piston Pro part # KU76ZR without any issues.
    view full answer...

  • Recommended Bike Rack for E-Bikes on a 2022 Lexus RX 450H
  • We have a couple options for bike racks depending on the type of hitch your 2022 Lexus RX 450H has. The racks are identical one fits a class II 1-1/4" hitch and the other fits a class III 2" hitch receiver. 2" Hitch: Yakima OnRamp Bike Rack for 2 Electric Bikes item # Y36FR 1-1/4" Hitch: Yakima OnRamp Bike Rack for 2 Electric Bikes item # Y96FR The OnRamp uses wheel straps along with adjustable clamps that grasp the bikes by the frame or seat post to secure them. They have a 66 lbs...
    view full answer...

  • Will The Factory Roof Rails On 2023 Lexus GX 460 Need Removed To Install Yakima FX Crossbars?
  • Those are some great questions, Dave. The Landing Pad 30 # Y25ZR will require you to remove the factory flush rails and the kit includes 6 mounts so you would be able to reposition the crossbars to front, middle or rear. Or you could get a 3rd crossbar to fit all 3 of your mounting positions. The Yakima SkyLine FX Crossbar 41-1/2" # Y35TR will fit the middle and rear positions while the 45-1/2" # Y95TR will fit the front only. This is because the roof rails on your 2023 Lexus GX 460 are...
    view full answer...

  • Recommended Hitch for a 2022 Lexus RX450h
  • The only hitch available for the 2022 Lexus RX 450h is the Hidden Hitch by Draw-Tite item # DT58GR. This hitch is custom fit and bolts to your Lexus with included hardware. It is a class III hitch with a 2" receiver that has a 350 lbs tongue weight so it will be great for your bike rack. The best part about the Draw-Tite item # DT58GR is its removable receiver. When you are not hauling around your bike rack you can take the receiver off and you won't be able to tell you have a hitch installed....
    view full answer...

  • Will the same hitch for a 2018 Toyota Rav4 fit a 2021 Lexus n300h
  • Mark, they did indeed change the frame on the 2021 Lexus NX 300 H. The same hitch from a 2018 Toyota Rav 4 would not be a fit. The hitch that you would be looking for is part # e89AR. If you also need a harness, it would be part # 118652.
    view full answer...

  • Recommended Trunk Mount 2 Bike Rack For a 2021 Lexus IS 350
  • Here is a list of the 2 bike trunk mounted racks we know to work on your 2021 Lexus IS 350. Thule Passage Trunk Bike Rack # TH910XT Saris Bones 2 Bike Rack # SA805BL Saris Bones EX 2 Bike Rack # SAR83FR Yakima HangOut 2 Bike Rack # Y02637 Thule OutWay Trunk Bike Rack # TH45JV Thule Gateway Pro 2 Bike Rack # TH88VR Thule OutWay Platform Trunk Bike Rack # TH65JV I know there are a lot of options but I would recommend the Thule Gateway Pro 2 Bike Rack # TH88VR as it is one of the easiest...
    view full answer...

  • Do You Have The Curt Trailer Hitch Receiver 13519 For a 2024 Toyota Grand Highlander?
  • We already carry the Curt Trailer Hitch Receiver(13519) # C26VV. This is the receiver for the new 2024 Toyota Grand Highlander. If you will be towing or need Auxiliary Lights # C53201 we do have the Curt T-Connector Vehicle Wiring Harness # C79VV which will give you a 4-way flat connector.
    view full answer...

  • Does The 2022 Lexus NX350H Have a 2 or 3-Wire Tail Light Setup?
  • I'm thinking you are wanting to know if the tail lights on 2022 Lexus NX350H are a 2-wire or 3-wire as I see you were looking at the Curt Powered Tail Light Converter # C59236. Your Lexus is going to have a 3-wire setup as the turn signals are separate from your brake lights. If you were looking for something else please let me know so I can help answer your question.
    view full answer...