We don't have just one 75' sewer hose, so the best we can do is recommend using 4 of the Camco HTS Standard RV Sewer Hose # CAM39611 and connect them using the Camco RV Sewer Hose Internal Coupler # CAM39203 which will give you 80' of hose.
To connect this hose to your RhinoFlex hose, you'll just need to attach the Camco RV Sewer Hose Straight Adapter w/ Bayonets # CAM39413 using the Camco RV Sewer Hose Twist-It Clamps # CAM39553. view full answer...
Hey Scott, I attached a link to this page that has all of the RV wye connections we offer that have 3 inch diameters on all sides of the connections like for example the part # CAM39812 which has bayonet style connections. view full answer...
Hey Debra, thanks for reaching out!
If your motorhome is equipped with the Valterra EZ Hose Carrier then yes, the Replacement Cap and Strap for Valterra EZ Hose Carrier # VA82VR will work for your application.
you can look at part # VAL53VJ as an example of what this system looks like (your tube might be longer). If you have something different please feel free to send in some photos and I'll be happy to help assist you! view full answer...
It's hard to say yes without knowing what it is you're replacing. The LaSalle Bristol RV Sewer Hub with Flange item # 34466V13MT you were looking at bolts onto your black-water waste valve and provides a 3" MPT fitting with threads. If you don't need the threads you can use the LaSalle Bristol RV Sewer Slip Hub with Flange - 3" item # 34466V13.
If this doesn't answer your question feel free to email me directly a couple pictures of the piece you broke so I can get a better understanding... view full answer...
Hey Gary, yes the Valterra Hose Adapter part # T1024-2VP that you referenced was designed for what you are looking for. It will fit into the 3 inch opening of the Y adapter you have now so that you would have a bayonet style attachment for the 3 inch sections. view full answer...
On a travel trailer like your 2021 Lance 2285 the go to hitch is typically the Adjustable Width Trailer Hitch Receiver # 13703. This hitch fits frames from 22-72" wide. However, this Class III hitch tops out at 350 lbs of tongue weight. In order to reach the 500 lb capacity you will need a universal Class V hitch like the # C59CR. This fits frames up to 62" wide so you will need to measure.
I have attached some review and installation videos below for your reference. view full answer...
We do not currently offer the specific hydraulic hoses that Lippert's leveling systems come with but we do offer the Lippert Replacement End Fitting for Hydraulic Hose on RV Leveling Systems item # LC138416 and the Lippert Replacement End Fitting for Hydraulic Hose on RV Leveling Systems item # LC249363 fittings so that you can just get whatever length hydraulic hose you need and then crimp on the appropriate fitting.
The item # Item # LC249363 has a inside hose dimeter of 1/4" and a 1/4"... view full answer...
It sounds like you're looking for something like the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports # 103615.
This kit lets you use an auxiliary propane cylinder to power appliances so you won't deplete your camper's tank, has a quick-disconnect port to allow for easy hook up of your supply hose, and has a disposable bottle port so you can hook up a small appliance.
Finally, for an extension hose, you can use the MB Sturgis Propane... view full answer...
Hey Frank,
From what I can find the 129147-02-000 cross references over to the Valterra T40H which doesn't come with the cable, but I'm assuming you'd prefer to swap out to all new hardware as well. For this and the gray waste valve you can use the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks # TC1372. These will both come with 72" long cables to open and close the gates. If you unbolt the old valves you can easily swap in the new ones instead... view full answer...
Glad you got it all set up but that's interesting your Rambler's fitting is a different size. The Demco Air Force One item # DM23MV you purchased is specifically designed for the factory BrakeSync fittings. I don't know if yours got swapped out by a previous owner or what and I have no idea what size it is. The easiest way to correct this would be to swap the fitting out on your RV.
I recommend taking the Air Hose item # DM97ZR to your local hardware store and matching the male fitting... view full answer...
Hello Doug. The Halo 1B grills are deigned to be used with either a 20 lb or 1 lb propane tank. The propane coming from your RV is already regulated. The grill also has an internal regulator, so even if there were a hose that connected the two, the grill would not work. It needs unregulated propane so it really can only be used with a propane tank. That or you would have to install a t-fitting like part # 103606 and place it before the regulator in your RVs propane system. view full answer...
As I do see the Weber Traveler BBQ has its own regulator you are not able to connect it to the quick disconnect on your RV. That quick connect is already ran through a regulator so you would not get enough pressure to run the BBQ properly. We do have the T-Fitting # 103537-MBS which you can connect in line of the main propane tank and then connect using the Adapter Hose # 100476-120-MBS which has a quick connect end for the Tee and the other end shares the same threads as the disposable... view full answer...
I took the Ultra Faucets RV Shower Valve w/ Vacuum Breaker # 277-000024 apart and found that the cartridge only fits one way and they make the valves so that you wouldn't be able to disassemble and rotate the connection to the bottom. Since there's no hot or cold indicators on the this faucet you could just install it upside down, but the lever would look a little goofy sticking up and the hot and cold would be reversed when turning the lever.
We do offer some other faucets that have... view full answer...
The easiest way to connect a 100 lb tank on your 2019 Cougar 5th wheel is with the MB Sturgis Sturgi-Stay T-Fitting # 103537-MBS. You can add this into your existing system and then run the 10' # MB Sturgis Propane Adapter Hose # 100794-120-MBS from the quick-disconnect to the POL fitting on your tank. You will not be using the old hose or adapters with this setup.
A line that long with a 1/4" fitting you could run straight into the regulator is not something that we carry. You may be... view full answer...
The Empire Faucets RV Kitchen Faucet # EM22WR does not have a removable aerator. This is going to be true for most all faucets this style and an easy solution is using a couple AquaFresh Interior Inline Replacement Water Filter w/ 1/2" Fittings # AF24FR. This is going to be similar to whole RV Filters # CAM40045 but has the much smaller fitting used on faucets inside an RV. view full answer...
Hey Chris,
From what I can find your 2018 Winnebago Vista 29VE has 19.5" wheels so the Wheel Masters 4-Hose Inflation Kit # WM8001-135 would work. Based on the photo the 135 degree bend is likely going to be the best fit but you might have to play around with it to get it perfect. These inflation kits can easily be installed at your home so you aren't wasting money on labor. I've attached a short video below where Dave will walk you through the installation process. view full answer...
Bill, yes the Camco RV Fresh Water System Backflow Preventer # CAM23402 is designed to prevent backflow, so it will prevent the water going back into the city water.
This valve has a 1" MPT x 1" FPT inlet / outlet, a 3/4" inner diameter, and has a corrosion resistant brass body. view full answer...
Hey Joe,
We don't currently offer a Thetford RV Toilet with an elongated bowl, but we do offer some other options that would likely still fit without modification. You'll need to measure the distance you have from the center of the flange bolts back to the wall behind to the toilet to determine your rough-in measurement. If you had an 11" or greater rough-in then you could go with the Dometic 320 Full-Timer RV Toilet # DOM87FR along with the hand sprayer attachment # DOM75FR. view full answer...
Hey Timothy,
The Heavy Haul'R bumper mount brackets unfortunately aren't sold separately so the only way to get them would be to go with the full replacement bumper # MNT43VR. view full answer...
You can use the # 103538-MBS with your setup. The T-fitting is rated for 250 psi and the hose is rated for 350 psi so there won't be an issue with the 125 psi from your propane tanks. MB Sturgis has high and low pressure systems and that 1/2 psi tag has something to do with their low pressure system. It isn't actually a rating for the parts you have they just don't bother to take it off when they put together the # 103538-MBS. view full answer...
Go To Results