Hey Stephen,
Tailgate seals like the TrailSeal Tailgate Gasket # 834532001583 are universal fits so it really just comes down to style of the gasket in my opinion. This seal has a flat surface which I find typically makes great contact with tailgate but if you ever get anything sticky on it will annoy the hell out of you sticking to the tailgate and start to pull away from the bed. I've also seen this bit when it's extremely hot out with other seals and I'm personally not a fan.
I'd... view full answer...
Hey Dave, thanks for reaching out!
The Westin Universal Fit Tailgate Mat # 50-6555 measures 54" long x 15" wide so if those measurements wider than your tailgate and you're able to cut it to match what you're needing then you'll be good to go! view full answer...
Larry, you will need to use the universal Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 as there is not a custom fit tailgate assist device for your 2004 Chevrolet Avalanche 1500. view full answer...
While the TailgateCamera Handle With 180 Degree Camera for 2002-2008 Dodge Ram looks identical to the factory handle on your 2006 Dodge Ram 2500 I have never worked with this product so I cannot tell if any of the internal mechanisms that the Pop & Lock Custom Tailgate Lock # PAL3400 attaches to are different. If you can get TailgateCamera to confirm if the internals of their handle are the same as the factory with the only difference being the camera portion there is no reason the Pop... view full answer...
Yes, the rail is notched on the # TX64FR so it will not interfere with the OEM tailgate handle on your 2024 Sierra. This cover is specifically designed to accommodate the handle and the MultiPro tailgate. view full answer...
Hi Kip,
There is an A-frame jack for your camper that will allow you to fully open the tailgate on your truck so your pups can hop in, though it is not an electric jack, it is the Ultimate Trailer Jack # 322-RDJ-2K.
You would have to go with this manual crank jack as electric jacks just aren't built in a manner that allows them to be low enough for the tailgate to open. I have added a photo a customer was nice enough to send in of the # 322-RDJ-2K underneath a fully open tailgate. view full answer...
Hi Saher,
For a 2017 Honda Ridgeline you'd need the Pop & Lock Custom Tailgate Handle # PL8675 if your current tailgate lock has a built in camera or the Pop & Lock Custom Tailgate Lock # PAL8600 if it does not. I've attached a couple of videos below where either Rob or Ryan will walk you through the installation process, depending on the kit you choose. view full answer...
The Gate King Adjustable Truck Bed Extender part # GK64FR does not have any tailgate lowering assistance built into it. We do have that separately with the DeeZee lowering tailgate assist part # DZ43200 which is a confirmed fit for your 2014 Ford F-150. view full answer...
I recommend the Pop & Lock Custom Tailgate Lock with Plug & Play T-Harness # PL94FR for your 2014 Toyota Tundra Crew Max. This kit includes the Plug and play harness so that you are not tapping into any wires on your Tundra. It will allow you to lock and unlock your tailgate with your existing key fob or power locks. view full answer...
Hey Jarvis, the Lippert Tailgate Storage System # LC404069 would install using either the Lippert Tailgate Storage System Mounting Kit # LC432223 or # LC432336 using the included brackets and hardware.
To answer your second question, the tailgate storage system # LC432223 would install under the bumper and # LC432336 would install over the bumper. view full answer...
I do have one option for you since the Replacement BOLT Lock Cylinder # BL709231 is for the Tailgate Handle with BOLT Lock # BL5922987 and will not replace the factory lock on your 2015 Chevrolet Silverado 1500WT. For that cylinder you will need to visit a Chevrolet dealer.
We do offer the Pop & Lock Custom Tailgate Lock # PAL8140 that will allow for you to use the power locks on your 2015 Chevrolet Silverado 1500 WT to lock and unlock your tailgate so that you will not need the key. view full answer...
Dan, I would need to know how much room you need to be able to open the tailgate with the trailer attached but you could theoretically use the Roadmaster High-Low Adapter for Tow Bars # RM-048-8 which would lower your receiver 8" likely giving you the clearance needed to drop the tailgate. view full answer...
Thanks for reaching out, George!
The Pop & Lock Custom Tailgate Lock with Handle # PAL1700C is plastic with a chrome finish added to it. According to the reviews we've received people are saying the quality is pretty similar to what came as factory on their truck so I wouldn't say it is high quality, but I also wouldn't say you're downgrading by replacing your OEM 2012 GMC Canyon handle with this.
When I'm shopping online 1-Star ratings make me a little nervous as well so you aren't alone... view full answer...
For your 2015 Toyota Tundra I recommend the Pop & Lock Custom Tailgate Lock # PL94FR because it has a plug-in harness which makes the installation easier. view full answer...
You are correct that the B&W Tow & Stow 2-Ball Mount # BWTS20066BMP was made with the GM MultiPro fold-down tailgate in mind. Basically, the shank is designed slightly differently which allows the tailgate to fold down all the way without making contact.
That said, it will definitely work with the 2-1/2" hitch on your 2024 Ford F-250 Tremor. I know Ford now has their new Pro Access Tailgate that folds out and down, and this has not yet been tested with the B&W ball mount. So you may want... view full answer...
Hey Phil,
The SportRack Ridge Swing 4 Bike Rack # SR2415 swings out 36" when fully extended so you'll want to measure out 36" from the center of your trailer hitch receiver to gauge if you'll be able to open the tailgate with the rack installed. view full answer...
Hey James,
The part you mentioned is just the rack system and will fit the 2024 GMC Sierra 1500 with accompanying rails. This is the roof rack system in the pictures, and the right one will depend on the bed size of your '24 Sierra 1500:
- 5-3/4 Foot Bed: TruXedo Elevate Truck Bed Rack System # TX96NV (note: will not fit with CarbonPro Bed)
- 6-1/2 Foot Bed: TruXedo Elevate Truck Bed Rack System # TX46NV
- 8 Foot Bed: TruXedo Elevate Truck Bed Rack System # TX66NV
It will work with... view full answer...
Hey Rob,
There unfortunately isn't an add-on lock for BAKFlip tonneau covers so the only way you'd be able to prevent someone from getting into the bed of your truck would be to close the cover and lock the tailgate. We do offer tailgate locks from Pop & Lock that you can install to automatically lock the tailgate with your key fob. If you're interested then I'd need to know the year/make/model of your truck. view full answer...
Hey Chris,
There are a couple options for you to carry your bikes in the bed of your 2020 Ford F-150 with the tonneau cover open, but the Thule Bed Rider Pro # TH38YC requires the use of the inside of the truck's rails, which is how your roll-up tonneau attaches to your truck. One thing you can do instead is use a couple of the Thule Insta-Gater Pro Truck Bed Bike Rack # TH93VR.
The # TH93VR attaches with set straps that go through your tailgate opening, so you just close your tailgate... view full answer...
From the center of the tube to the furthest part of the motor housing on the Stromberg Carlson Electric Trailer Jack item # JET-5000 measures right at 5-3/4". The distance from the mounting bracket to the top of the jack is 23". This jack would clear a tailgate if the measured distance from the back of the tailgate to the jack mounting point on the trailer was 24", which gives 1" of clearance.
It can not be mounted at 90 degrees. No electric jack like this can.
If you are worried about... view full answer...