The Air Lift LoadLifter 7500 XL # AL57531 that you referenced has a max psi range of up to 100 psi and can provide 7,500 lb of additional suspension support. I will say that at 100 psi your suspension will be incredibly stiff. view full answer...
If the Air Lift LoadLifter 5000 # AL88204 is at 5 psi there is practically no pressure so it will not alter the height of the truck bed. Regardless, the air bags are designed to add support which helps keep it level, they don't act as a lift to raise up the height of the bed. view full answer...
There are two possible options from Air Lift for your 2009 Tioga 31M. They are as follows:
-Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57242
-Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle # AL88242
The difference between these two kits is the jounce bumpers. Since you're putting these on a motorhome I would choose the option that has them. This will add extra support and help prevent any bottoming out. Drilling will be... view full answer...
Ride quality is something that can be improved with air bags, though I did want to first mention that the part number you mentioned isn't a fit for your 2019 Ram ProMaster; instead, the correct fit is the following:
- Air Lift LoadLifter 5000 Air Helper Springs # AL57233
As far as ride quality, it can be improved by using the # AL57233 to add support to the rear of your ProMaster. If your van is loaded with passengers, and that weight is causing the back end to sag or bottom out when... view full answer...
Hello Dennis. I tried reaching out to Torklift but unfortunately, they do not have any drawings or dimensions for the step support that they are able to share. They do not share their technical documents like some places do. All I can tell you is that this step is designed to fit a 24" wide doorway, so as long as your door is 24" wide and the entry height is between 34-7/8" and 42-3/8" the step will fit nicely. We have never heard of drawers causing an obstruction for the step bracket so... view full answer...
Great question, Mike!
The Air Lift 1000 Air Helper Springs # AL43WQ will help support the OEM suspension on your 2023 Nissan Rogue but they won't increase the tongue weight capacity for your vehicle - this is the case for every suspension enhancement for any vehicle.
The only time I've ever seen a vehicle with the option to increase the weight capacity is when a "tow package" can be added, which in turn gives the vehicle more durability. You'll have to reach out to Nissan to see if there... view full answer...
Hey Don, good question and I checked directly with Air Lift for you and can confirm that so long as your 2024 Ram 2500 Rebel does NOT have the factory auto-leveling air suspension, the air bags you asked about are indeed a fit:
- Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88289
You made a great choice as these will give your Ram's suspension a high level of support while you tow, keeping your truck level for optimal handling.
Also, I do highly recommend considering adding... view full answer...
A 1 inch lift on your 2021 Ram 1500 will be no problem and you won't even need spacers. So long as you don't have the TRX model or the factory air suspension, the Air Lift air bags will fit your Ram 1500, with the correct part number being the following:
- Air Lift LoadLifter 5000 Air Helper Springs # AL57375
These will do a very nice job of giving added support to the rear suspension of your Ram, and to go with the air bags I do highly recommend adding a compressor to make both monitoring... view full answer...
The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following:
With a factory installed hitch or non-Torklift aftermarket hitch
-TorkLift Talon Camper Tie-Downs # TL52XR (front) and # TL34FR (rear)
or
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLD3112 (rear)
With a TorkLift SuperHitch Magnum 30K
-TorkLift Camper Tie-Downs # TLD2141 (front) and # TLR3510 (rear)
Keep in mind, none of these will fit if you have the aftermarket... view full answer...
Hey John,
Since body lifts only move the body away from the frame and don't change the distance between the frame and suspension the lift should be irrelevant to fitment in your case. For anti-sway bars I recommend the Roadmaster Front Anti-Sway Bar # RM-1139-180 and Rear # RM93VR. For the # RM93VR to fit you'll need the forward leaf spring bump pads, on either side, to be bolted to the frame and not riveted. For DRW models you'll want the # RM-1139-193 instead of the # RM93VR.
As for... view full answer...
Yes, we can get your 2013 Ford F-250 set up with air bags and a compressor to give it the best possible support for when you are towing your trailer. A one inch lift won't require the use of any spacers (in fact, the smallest spacer is 1-1/4"), and the best options for air bags are from Firestone, with the correct fit for your F-250 being the following:
- Firestone Ride-Rite Air Helper Springs # F2597
The Ride-Rite air bags are easily the best because they are the most well-constructed... view full answer...
Hi John,
From what I can see on the Cognito kits the leaf spring stack is just getting a spacer block and new u-bolts so you'll be able to install the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-HD. This just clamps to one leaf spring eyelet and the other side will clamp to the other side of the leaf spring stack. This style of suspension enhancement will help support any loads you have to haul without majorly affecting your unloaded ride quality like other enhancements... view full answer...
Hi Brett,
You could replace your torsion axle with the Timbren Axle-Less Trailer Suspension # ASR3500S06, but you'll first want to confirm your trailer's GVWR and remove the lift spacers. These are rated for 3,500lbs so you'll want to be careful not to overload them if your fully loaded trailer exceeds that rating. Do you know the axle capacity of the torsion axle? These need to be bolted directly to the trailer frame and since they have a 4" lift you'll still be close the the same height.... view full answer...
For your 1998 Ford Mustang GT we have the Firestone Coil-Rite Air Helper Springs # F4103. These have a load-leveling capacity of at least 500 lbs to provide extra support for your rear coil springs. They will help keep you level, improve steering control, and reduce tire wear. view full answer...
Hey Colby, thanks for the question and we can get your 2020 GMC Sierra 1500 with the diesel set up with air bags and a compressor. For air bags that fit your truck, you'll need to go with Air Lift, and the right part number is the following:
- Air Lift LoadLifter 5000 Air Helper Springs # AL57288
These will give your Sierra a robust 5,000 lbs of suspension support, which is going to be more than enough for any type of towing or hauling. Adding a compressor is a really smart idea, as it... view full answer...
Hello Scot. I double checked with the folks at Air Lift and they actually do offer one air bag kit for the 2005 Chevy C4500 Kodiak, the Air Lift LoadLifter 5000 Air Helper Springs # AL57292. They do list a few specific models of the 4500 that it will fit, and I have included a screenshot of their fitment chart below.
Aside from this one kit, everything else we offer for the 4500 will be the Timbren bump stops like you mentioned. The Timbrens work great for support when you are towing,... view full answer...
Good question as there are specific air bags needed to fit your 2022 Ford F-150 with the PowerBoost engine (please note that there are no air bags that fit if you have the optional Continuously Controlled Damping). The best option for air bags that fit your '22 F-150 with the PowerBoost engine are the following:
- Air Lift LoadLifter 5000 Air Helper Springs # AL82WQ
I verified with Air Lift the # AL82WQ are a fit for your '22 F-150 with the PowerBoost engine (both 2WD and 4WD models),... view full answer...
Looking at your measurement there it appears as though the top of the hitch is approximately 24" off the ground. The Hollywood Racks Sport Rider SE # HLY84FR has a rise of 7" so expect to lift your e-bike about 31" to get it on the rack. If that is too much I recommend pulling the battery so it is easier to lift. Also, now that I see the full frame of your particular TotGuard you will likely need the # HRBA-PRO as well.
We have options with a ramp like the Thule EasyFold XT # TH903202... view full answer...
Hey Judd, so none of the scissor jacks we offer should be used as a jack to change a tire although I am sure people out there at some point have done so. They are just designed to stabilize the trailer and not support that much weight. Instead you would need a bottle jack like the part # ALL647501 instead for this application. view full answer...
Dutton-Lainson does not give a separate holding capacity for their Pipe Mount Jack # DL22685. The Fulton Drop-Leg Stabilizer Jack # FSJ1-SJ2 is one of the popular options for your type of situation. Each of these have a 3,000lb capacity so with one on each side that will likely be enough capacity for your Kubota M7060 Tractor since not all of the weight is going to be on just the stabilizers. view full answer...
Go To Results