The main difference between CE Smith Keel Roller for Boat Trailers part # CE29518 and Yates Keel Roller for Boat Trailers part # YR10000 is that the former is non-marring and the latter is not. This means the latter could leave black streaks on the boat hull from contact. The former is made of PVC which is also stronger and more durable than the latter which is made of rubber. view full answer...
I have two great TPMS options for a single axle boat trailer, the PressurePro FX 2 TPMS for RVs and Trailers part # 372FX2K or the TireMinder TPMS for Single Axle Trailers part # TPMS-TRL-2. The best system really comes down to preference as the main difference is the PressurePro uses your phone as the display and the TireMinder uses its own monitor. That said, the TireMinder requires a special wrench to remove the sensors so someone can't just steal them which I like.
They will both work... view full answer...
Hey Al, we have the CE Smith Guide Ons part # CE27760 that we know fit on Ranger boat trailers as we had a customer with the same trailer install them and they found they worked great. See attached picture. They used the included hardware for the install as well. view full answer...
Hey Clint,
In order to use the CE Smith Bow Roller for Skiff Boat Trailers # CE29791 you would need to get two rollers and a 5/8" diameter bolt with a locknut and washers to secure the rollers to your bow roller mounting bracket on the trailer. For the length you'll need to measure the width of the bracket and rollers. You should be able to find all the necessary hardware at your local hardware store. view full answer...
Hey Kevin, thanks for reaching out and providing the photos!
It doesn't look like we have anything that fits with that specific design (as it looks to be part of the actuator), but we do have some alternative options like the Fulton Boat Trailer Jack w/ 2 Wheels # FXPD15L which has a 1,500 lb weight capacity. view full answer...
For your Shoreland'r boat trailer you will need the following parts.
Self Adjusting Electric Trailer Brake Kit # AKEBRK-35-SA
Galvanized Trailer Hub and Drum Assembly # AKHD-545-35-G-K
Trailer Wiring 7-Way Upgrade Kit w/ Junction Box # HS381-9000
Trailer Breakaway Kit # 20400
It appears your trailer already came with Bearing Buddy Bearing Protectors # BB1980A-SS, be sure to check them for any damage to determine if they should be replaced.
You will need 12 Gauge Wire # 12-1-1 to run... view full answer...
Hey Stevie,
We don't currently offer any kind of interior fender protector but we do offer bunk carpeting, like part # CE11349 that could be mounted to the fenders to prevent the boat from scratching against the metal fenders. We offer a few different sizes and colors, which I've attached a link to below. view full answer...
Yes, we do have a couple of idler hubs that fit the item # L44649 inner and outer bearings on your Venture boat trailer. They come in two different lug pattern sizes and are designed specifically for boat trailers. I couldn't get any information off of that part number so thank you for including the bearing sizes. I have listed both of our options below:
5 on 4-1/2 Lug Pattern - Trailer Idler Hub Assembly for 2,000-lb Axles item # AKIHUB-545-2-G-2K
4 on 4 Lug Pattern - Trailer Idler Hub... view full answer...
Hey Peter, I actually went out to the warehouse and measured the Yates Spool Roller for Boat Trailers # YR8302-4P and measured 51 mm for the inner and 75 mm for the outer. view full answer...
Since your trailer is a Shoreland'r I may be able to get the correct part information from the manufacturer if you can provide me with your VIN information. If you have the trailer where you can measure and send me images of the leaf springs that will allow me to more quickly see if we have any replacements for your leaf springs. view full answer...
The Taskmaster Steel Modular Trailer Wheel you mentioned, part # TTW460545WS1 does indeed have a zero offset. It would make an excellent replacement for your existing wheels. The tire is a radial, with a 1760 lb capacity at 50psi. The tire carries an M speed rating, good for up to 81 mph. view full answer...
Hey Steve, here are the parts you need in order to tow a small boat trailer with your minivan:
-etrailer Ball Mount w/ Pre-Torqued 2" Ball - 1-1/4" Hitch - 3-7/8" Rise - 3,500 lbs # e47DR
-Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat # C57187
The etrailer ball mount fits your 1-1/4" opening and has the pre-torqued 2" ball ready to be hooked up to your trailer! The mount has a strong powder coat finish and the ball/pin is protected by a black nickel coating that resists corrosion... view full answer...
I do not have a database that shows me what replacement hub you need for your 2017 TItan Boat Trailer. In order to determine which one you need I would need to know what size inner and out bearings your trailer uses and what is the lug pattern so you can reuse your current rims.
Your bearings are new enough that there should be part numbers stamped into the sides. If not I have attached a diagram below that will show you how to measure your spindle. If you could email me those numbers... view full answer...
Hey Chad,
There unfortunately isn't a guide to tell us the correct bearings and seals for your Load Rite boat trailer so you'll need to remove the hub and check for the part numbers or measure the spindle and hub bore hole. With a caliper # PTW80157 you'll want to measure points B, C, and D on the spindle for the inner diameters and the hub bore hole for the outer diameter. Once we have these measurements I can look up the correct replacements. view full answer...
Hey Gary, so the best option would be to go with a Correct Track lift kit as that will give the trailer a lift of 2-5/8 inches. For that we have the part # LC87120 for a single axle or the part # RR23QX for a tandem axle. view full answer...
Since you said your boat trailer has a 2,200 lb axle capacity and a 5 on 4-1/2 inch bolt pattern the correct replacement hub you'd need is the part # 8-258-50UC1 that you referenced. view full answer...
Hey Norm, the Curt hitch part # C13136 is the correct fit for your 2009 Audi Q5 and would work great when towing your boat trailer. Since your vehicle doesn't have the factory tow package you would need to go a different route for trailer wiring. You'd need to start with the part # C59236 for a 4-way and then to convert it to a 7-way you'd need the part # 37185. view full answer...
Since we don't have any 31 inch long leaf springs and I don't believe you'll be able to find the correct size anywhere else your best option would be to go with a spring like the part # e44SR which is 25-1/4 inches long and is rated for up to a 5,000 lb axle. You'll also need a hanger kit to mount these like with the part # APS4 and you'd be set. view full answer...
Rather than using the Malone MicroSport Trailer # MPG460G you found the Malone LowBed MicroSport Trailer # MPG464-LB will place the boat 8" lower. Either will need the Bunk Kit # MPG561 to carry your 1542 Jon boat. Both trailers are capable of carrying boats up to 20' long. view full answer...
Go To Results