Hi Glenn,
I'm sure we have lights for your Karavan trailer but have no way of knowing specifically what lights are on any one trailer. So you will need to measure your current tail lights and find the ones that most closely match your measurement.
For example, the LED Trailer Combination Tail Light # STL39RB is 4-1/2" tall x 5" wide x 2-1/2" thick.
I have added a link below to our entire selection of trailer lights which you can filter through by size. view full answer...
While we don't have any way of knowing what light is on your Bushwhacker tear trailer, you can find the right one by measuring your current tail light and finding the closest match.
From what I saw when I googled that trailer it looks like they have a strip light for tail lights, so for example if the light was 12-5/8" long x 1" tall you would use the Thinline LED Trailer Tail Light # STL59RB.
I have added a link below to our entire selection of tail lights for you to check out, which... view full answer...
Hi there Todd; while I was unable to find any type of reference to a J04248 light, it sounds like you are just needing to replace the amber/yellow clearance/marker light on the side of your wife's horse trailer, is that right? If so, you don't need to find the exact light, you can replace it with one that is similar dimensions and wires the same.
I googled some photos of a Brenderup horse trailer and from what I saw they were just surface-mounted lights. So if you just measure the lights... view full answer...
Jim, so size wise and LED wise the Thinline LED Clearance and Side Marker Light # AL91AB is the closest we carry to what you need.
This light measures 2 1/2" long, 1 3/16" wide, and 7/8" deep so it'll be about 5/16" less wide than your current light, but could still absolutely work. Pictures would definitely help understand what you're describing, so if you could send some in that'd be a big help. view full answer...
Yes we do Danny, check out the Optronics LED Trailer Tail Light # STL78RPG. This is a submersible LED tail light that has 10 diodes, a 3 wire design, and measures 7-9/16" long x 3-5/16" tall x 3/4" thick. view full answer...
We several options with similar dimensions although none of them are an exact match to the Truck-Lite 60. The Peterson LumenX LED Trailer Tail Light # M822R-7 matches your length at 7-7/8" but is a little taller at 3-5/8" and has completely different mounting holes.
We also have some Optronics lights like the GloLight LED Trailer Tail Light # STL111RFMB which are 7-1/2" wide x 3-5/16" tall so a little short on the length. All of the Optronics have mounting holes that are 7" apart while... view full answer...
I wasn't able to find any of our lights that use a 2-1/2" mounting hole spacing the closest two I could find to that are listed below:
3" Spacing - Optronics Double Bullseye LED Trailer Clearance or Side Marker Light - 10 Diodes - Red Lens item # MCL45RB
2-3/4" Spacing - Mini LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Amber Lens item # MCL85AB view full answer...
I believe you are looking for the GloLight LED Trailer Tail Light # OPT54WR. This has the same 3 pin connector as in your image. The overall dimensions of this light are 7-1/2" wide by 3-5/16" tall and 1-1/8" deep. If you have a different size light please let me know.
We currently do not have any pigtails with this type of connector. If you want to change out to better connectors we do have the Pigtail # A45PMB which uses a common weathertight plug. These and the male end are also commonly... view full answer...
The closest light we have to those dimensions is the Opti-Brite LED RV Dome Light item # ILL10CCB you had looked at. It measures 18" long x 5-3/4" tall x 1" thick and has a output of 880 lumens. It has 10 diodes so it will produce quite a bit of light. It would be great for a work area or you could install a few and light up your entire car hauler. view full answer...
Thanks for reaching out, Wendell!
According to my research the Triple LED Trailer Tail Light # CE44VR looks very similar to what comes on your 2019 Coachmen Freelander 21QB. As long as the 14" long x 6-7/8" tall x 1" deep dimensions match what you have then you'll be able to use this on your motorhome! view full answer...
Hi Terry,
With them being obsolete we will not have them either, but we can most likely find a suitable replacement. I'll just need some dimensions on the lights in order to find a compatible fit. If you want to send me those measurements and some pictures of the lights I can see if we have anything that matches. view full answer...
Hey Ivan,
Yes, this is a pretty common request for trailer owners that also want to haul their boat, golf cart, ATV, etc. so they add a trailer hitch and tow a second trailer. This is called triple towing and can be dangerous because you're adding more length and a second pivot point so there are laws and restrictions on triple towing that you'll want to research before attempting it. Usually the state and local municipalities you'll be driving through will need to be checked. I don't... view full answer...
Hey Joe, from what I can see it looks like your 2014 Keystone Laredo uses the LED Trailer Tail Light # STL56RB. These lights measure 6-1/16" long x 3-5/8" tall x 2-1/4" deep, so if your lights have the same measurements then these'll work great.
If not, just let me know what your light measures below and I can take a look at what we have. view full answer...
Hello Edwin. The Curt Class 1 Hitch # C11258 for the 2015 Chevy Sonic is rated for towing up to 2,000 lbs. Based on what I can see online a SeaDoo RXP 300 weighs about 780 lbs. I imagine the corresponding trailer is fairly light as well. So, as long as the weight of the jetski and the trailer is less than 2,000 lbs you can absolutely pull a trailer with this hitch. view full answer...
Hello Dan. That is not a common size for a u-bolt, but we do have one option for you. Take a look at Item # TR-2200. This is a square u-bolt designed to fit over a 4" square bumper, but it would work for a 4" trailer frame as well. I have included a diagram with dimensions for this u-bolt below. This u-bolt is a 3/8" - 16 course thread. view full answer...
Hey Mark, thanks for the question and we do have an option for you, though not the exact LT245/75R16 M+S Radial XTX. Reason for that is those are light truck tires and not trailer tires (light truck tires will have an "LT" before the tire size and trailer tires have an "ST" before the size).
That said, we have a very close option in size, with a ST235/80R16 trailer tire. These are 30.8" in diameter and 9.25" wide, so they will only add about 1/8" of height at the top of the tire and are... view full answer...
We do have a rocker switch that can be wired in a three way config - the Single Rocker Switch # 37212625. This switch is American made, measures 1.2" tall x .5" wide, and has cut out dimensions of 1-1/8" tall x 1/2" wide. view full answer...
I'm not certain, but it looks like your 2018 Forest River Berkshire has something similar to the Replacement Amber Lens for MC44 or MCL44 Series Side Marker or Clearance Trailer Lights # A44AB.
This lens measures 4" long x 1-1/2" tall x 7/8" deep so you'll want to make sure that the lens you have matches. If it does not, feel free to come back with some pictures and dimensions and I'd be happy to help. view full answer...
Hi Holly,
There unfortunately aren't any custom-fit hitches confirmed to fit your 1971 Toyota Land Cruiser FJ40 so you'll have to go with an adjustable-fit weld-on trailer hitch. These come in a variety of drop lengths to help you clear the rear bumper/fascia so you'll want to measure down from the frame to see how large of a drop is needed for the receiver tube to clear.
Draw-Tite
7" Drop # 41990-07
16" Drop # 41990-16
Curt
3" Drop # 15901
9" Drop # C47CR
10.865" Drop # 15902
11-1/2"... view full answer...
Go To Results