Expert Answers about Audi SQ5

Does EcoHitch for 2019 Audi SQ5 Replace Factory Bumper Beam
The EcoHitch part # 306-X7397 that you referenced fits behind the rear bumper beam of your 2019 Audi SQ5 once installed.
view full answer...

Easy to Install Brake Controller Recommendation for 2018 Audi SQ5
I have a really easy to install Curt brake controller for your 2018 Audi SQ5 that is actually better performing and much more reliable than the Triflex with the Curt Echo part # C51180 which basically just installs into an active 7-way and once synced to a smart phone is ready to go without requiring any wiring. At this time we don't have a way to splice the Triflex into the factory tow package wiring of your vehicle.
view full answer...

What is the Difference Between the Curt C56190 and C59236 for 2011 Audi SQ5
I can see why this might be confusing. The Curt # C59236 is a complete wiring kit that comes with the wire to run from the converter module to the battery, where if you went with the Curt # C56190 you would also need the Powered Converter Wiring Kit # 55151 for the wiring and fuse to run to the battery. The Curt # C59236 also has a slightly higher amp rating for the tail lights/turn signals, so I recommend going with that-it's also a complete kit so there's no need to worry about adding...
view full answer...

Comparing Curt C98JR And EcoHitch C98JR Trailer Hitches For A 2021 Audi SQ5
Hello Andrew, great question. I will start by saying that with our videos, generally you can assume that the tires and suspension are stock when we are measuring the hitch clearance. Although, we do not have the tire size or suspension type noted anywhere specifically. In the case of the EcoHitch # 306-X7397 and the Curt # C98JR (13499) both will have the exact same 15" ground clearance on a 2021 Audi SQ5. The Curt has a slightly longer receiver, so it does have a slight edge as far as...
view full answer...

Best Bike Rack For Carbon Fiber & Titanium Frame Road Bikes & 2" Trailer Hitch
Those are some pretty awesome bikes you have there and they definitely deserve a bike rack of similar quality. When I started reading your question there was one rack that came to mind, right away and then you even went on to mention the brand, which is Kuat. The best rack for your carbon frame and titanium frame bikes is one that isn't going to touch those frames and is super simple to use, the Kuat Sherpa 2.0, which is even available in your choice of colors: - Gray: Kuat Sherpa 2.0...
view full answer...

Availability of a Trailer Hitch Receiver for a 2018 Audi SQ5
I have a solution for you, however, the Draw-Tite Class III Trailer Hitch, # 75940, will not work on the 2018 Audi SQ5. The Draw-Tite Class III Max Frame Trailer Receiver Hitch, # 76183, is the confirmed hitch for the 2018 Audi SQ5. This Draw-Tite hitch is designed to fit your Audi with no drilling required to install on the frame of the vehicle. This hitch has a 2 x 2 inch receiver opening and has a 750 lbs tongue weight capacity. Installation of the this hitch will require the temporary...
view full answer...

Hitch Confirmed to Fit a 2022 Audi SQ5
Yes, we have a hitch that is confirmed to fit your 2022 Audi SQ5. The Stealth Hitches Hidden Rack Receiver # 391AUDQ518 is confirmed to fit all models of the 2022 Audi SQ5. This hitch is made in the USA, has a bolt-on, no-drill installation and is going to provide you with a 2" receiver opening for using hitch mounted accessories like a bike rack or cargo carrier. The hitch receiver that comes with this hitch is not rated for towing, so if you plan to do any towing you will need to add...
view full answer...

Recommended Hitch Receiver for 2020 Audi SQ5 with Lift Gate Sensor
My recommendation for your 2020 Audi SQ5 with lift gate sensors is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76183. The sensors will only be limited where the center receiver is located. No lasting modifications to the vehicle are needed. If you need the trailer wiring as well, I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This doesn't require any splicing into the factory...
view full answer...

Recommended Hitch, Wiring Harness, and Brake Controller for a 2022 Audi SQ5
I would be happy to help you add a hitch, wiring harness, and brake controller to your 2022 Audi SQ5. For the easiest all in one solution to your hitch and wiring harness, I recommend the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # 391AUDQ518T. This hitch is custom fit and bolts directly to your Audi with included hardware. This kit includes the 7-way wiring harness you will need to control your trailer's brakes. The receiver is also completely removable when...
view full answer...

Recommended Hitch and Wiring Harness for a 2019 Audi SQ5
We do have a network of installers that are in the Everett Washington area. You will want to go to the left hand side of the item # 306-X7397 product page. Below the pictures and videos is a blue link that says, Locate installers near me. You will want to click on this link and input your zip code. This will give you a list of reputable installers. The EcoHitch Hidden Trailer Hitch item # 306-X7397 is confirmed to fit your 2019 Audi SQ5. If you are planning on towing you will also need...
view full answer...

Is Wiring Harness Available For 2014 Audi SQ5
We do not offer any wiring adapters or harnesses for the 2014 Audi SQ5. You may want to check with your dealership to see if they have a wiring harness available for your vehicle.
view full answer...

Is Trimming Needed With Draw-Tite Hitch For Audi 2020 SQ5?
Our installation video states that some trimming may be required on your 2020 Audi SQ5 but the installer was able to replace the fascia without trimming it. So to answer your question I would say no you do not need to trim the fascia when installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 76183. While installing if you feel you will need to trim the fascia to meet your standards, you will need to trim using a rotary tool or some snips. Then trace the section of fascia that is...
view full answer...

Will The SportRack Skyline XL Cargo Carrier Fit A 2018 Audi SQ5?
The SportRack SkyLine XL Cargo Box - Roof Mount # SR29ZR that you mentioned will work just fine with your 2018 Audi SQ5! This cargo carrier will work with round, square, aero, elliptical, and most factory crossbars. For a crossbar recommendation, I recommend taking a look at the: -Thule WingBar Evo Crossbars - Aluminum # TH711200, with the feet # TH710601, and the fit kit # TH186045. These bars are quiet, aerodynamic, low-profile with a maximum capacity of 220-lbs, and measures 47"...
view full answer...

Yakima HighRoad Roof Bike Rack 2020 Audi SQ5
I suggest the Yakima HighRoad Roof Bike Rack, # Y02114. This wheel-mount carrier lets you transport 1 bike on your roof rack crossbars. Pivoting wheel hoops hold bike by the front wheel, and TorqueRight knob prevents over-tightening. Rear-wheel cradle adjusts to hold bikes of different lengths.
view full answer...

Availability of Wind Fairing for OEM Crossbars on a 2014 Audi SQ5
We do have a variety of wind fairings that you may be able to use with the OEM roof rack on your 2014 Audi SQ5. I like the Thule AirScreen Fairings which are compatible with aero bars that are a max of 3-1/4" long x 1-1/8" tall or square bars that are a max of 1-3/8" long x 1" tall. These come in the following sizes: 32" - # TH62WV 38" - # TH72WV 44" - # TH82WV 52" - # TH22WV Simply choose the length that will best fit between the roof rack legs on your Audi.
view full answer...

Draw Tite Hitch Fit for a 2016 Audi SQ5
Yes, the Draw Tite Hitch part # 75940 that you referenced is a confirmed fit for your 2016 Audi SQ5. I attached a picture that shows the hitch installed for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the...
view full answer...

Will the Curt Trailer Hitch Receiver # C13136 Fit a 2017 Audi SQ5
I do have a solution for you, but the Curt Trailer Hitch Receiver # C13136 is not confirmed to fit your 2017 Audi SQ5. The Class III Draw-Tite Max-Frame Trailer Hitch Receiver # 75940 is the correct part that you are looking for. Even though we have rated this installation at a 10 out of 10 for difficulty, if you are used to working on cars you might be able to do it yourself. I have attached a video of this hitch being installed on a 2017 Q5 that you can use as a reference. If you will...
view full answer...

Who Makes The Stealth Hitch Receiver
The Stealth Hitches Trailer Hitch Receiver w/ Towing Package - Custom Fit - 2" like part # SH34FRT for the 2019 - 2020 Audi e-tron are made by a company called Stealth Hitches. They are a newer company that manufactures completely hidden designs. The cross tube is completely concealed behind the bumper. The receiver and ball mount are two different attachments that latch into place when you need to use them. The pieces are removable when not in use for a nice clean OEM look on your vehicle.
view full answer...

Will Older Hullavator 897XT Fit on 2019 Audi SQ5?
It sounds like you have the older Hullavator 897XT which was replaced by the Thule Hullavator Pro # TH898. As for if it will fit your new 2019 Audi SQ5, the answer is YES! What the Hullavator needs is around 28-1/2" inches of bar space and a roof rack with a good amount of weight capacity to handle the rack's 41 lbs plus up to 75 lbs of kayak. With the older Hullavator 897XT, you would need the watersports adapter # THXADAPT11 to work with T-track bars. If you do not yet have a roof rack...
view full answer...

Installation of Draw-Tite Trailer Hitch Receiver on 2017 Audi SQ5
We haven't had the opportunity to make a video of the Draw-Tite Max-Frame # 75940 on a 2017 Audi SQ5 like yours as of yet. However, since the hitch fits both the 2017 and 2016, the installation will be very similar. I've linked a video of the hitch being installed onto a 2016 Q5. If you also need a 4-way wiring harness the correct part is # C56404.
view full answer...