The Curt Trailer Hitch Receiver part # C11086 which is a fit for a 2013 Hyundai Genesis Coupe won't be affected directly by aftermarket coil springs. That said, the vehicle does sit rather low already so lowering even further from the factory will mean you will have reduced clearance for the trailer hitch which you will need to pay attention to when going up steep driveways and over bumps. view full answer...
The Curt Hitch part # C12086 that you referenced has been confirmed as a fit for your 2015 Hyundai Genesis Sedan so I would recommend it for you.
The install video that I attached is for a 2009 but the process will be the exact same for your 2015. view full answer...
The Thule OutWay, # TH45JV is indeed compatible with your Hyundai Genesis 4 door sedan. The 2 retractable cables make the OutWay our easiest to install bike rack, and also our most popular. The Thule FitDial system allows the rack to adjust exactly to the contours of your Genesis.
There are no other parts necessary, with the possible exception of a bike frame adapter tube like part # 64005, which might be needed for some bikes with sharply angled top tubes or step-through frames (like... view full answer...
I am sorry but the only base plate we offer for the 2010 Hyundai Genesis Coupe is the Blue Ox kit # BX2332. We have no Roadmaster base plates for this car but there are adapters available to let you use your Roadmaster tow bar with these Blue Ox base plates.
Use part # RM-031 if you have a Blackhawk, Falcon, or Sterling tow bar with serial number up to 16,500.
Use part # RM-031-5 if the serial number is higher.
Pricing is shown on the items' pages and shipping charges can be seen by... view full answer...
The 2 inch hitch size is used only on higher capacity vehicles like SUVs, trucks, and sometimes vans whereas lighter duty vehicles like your 2011 Hyundai Genesis only have the smaller 1-1/4 inch hitch size available like the Curt # C11086 for if you have a coupe or part # C12086 for if it's a sedan. view full answer...
The pin hole dimension of the Curt trailer hitch part # C12086 is compatible with a Yakima Ridgeback 4 # Y02458. The fit note you mentioned basically only refers to the Subaru trailer hitches that are 1-1/4 inch as they have a really strange pin hole setup.
The Curt hitch is perfectly compatible with your bike rack.
Hitch installs are pretty basic for a qualified mechanic. Pretty much any qualified mechanic in your area would take care of it easily. view full answer...
Yes, we have a tan Weathertech set of floor mats similar to the # WT463781 that you referenced.
You will want the part # WT453781, this is a tan set of front floor mats confirmed to fit your 2013 Hyundai Genesis.
For a set of matching rear floor mats you would want the # WT453062. view full answer...
We recently spoke with Curt and found that hitch # C12086 is indeed a fit for all wheel drive models of the 2015 Hyundai Genesis sedan.
If you plan on doing any towing with the hitch the correct ball mount to use is # C45521. For a 2 inch ball use # A-82 and for a 1-7/8 inch ball use # A-80. And for trailer wiring you can use # C56264 to add a 4-Way flat connector to the back of the Genesis.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have... view full answer...
The Class III and IV trailer hitches are designed for higher capacity, larger vehicles like SUVs and trucks that have higher towing capacities. The hitches we have for your 2009 Hyundai Genesis are lower in capacity like the Draw Tite Class II part # 36486 which has a 300 lb tongue weight capacity. Best option would be to go with a small trailer if this is the only tow vehicle you have. I attached an install video for this hitch for you to check out as well. You'll want to check your owners... view full answer...
A sun roof can pose a challenge to compatibility of roof-mount accessory items like roof racks and bike and ski carriers. This is because a sun roof will cause a vehicle's roof weight-carrying capacity to be substantially reduced.
A better option is to install a hitch and use a hitch-mount carrier for your skis. If you have the Coupe version we do offer a light-duty 1-1/4-inch Class I trailer hitch from Curt, their part # C11086. This hitch bolts on using included hardware. Any accessory... view full answer...
We do carry one trailer hitch that will fit the Hyundai Genesis Coupe, but # 36486 will not fit. Instead, take a look at Curt Trailer Hitch # C11086. This hitch is listed as a fit for the coupe models. I have included a link to the installation details for you to view. view full answer...
So the best option for you might actually be a hitch mounted bike rack, but for a trunk rack the Saris Bones part # SA805BL is a great option. It's priced great and is an incredibly solid trunk rack. That said, you can't open your truck with any trunk rack installed. The hinges of the trunk aren't designed for the weight of the rack and the hooks may pinch the metal as the trunk opens damaging the vehicle. Also the rack would be very likely to slam down at any moment which could be dangerous.... view full answer...
The Curt Hitch part # C12086 is the correct trailer hitch for your 2015 Hyundai Genesis Sedan as it has been confirmed as a fit.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported... view full answer...
The Kat's Heaters Custom Fit Engine Block Heater part # KH11812 is a cartridge style heater that fits in a hole in the block of your 2012 Hyundai Genesis. It does not actually touch any fluid. It would just heat up the metal of the block by conduction like you mentioned.
Just for fun...
Heat conduction (or thermal conduction) is the movement of heat from one solid to another one that has different temperature when they are touching each other. view full answer...
Since your 2013 Hyundai Genesis is a Sedan with no existing rails or crossbars I recommend the Rhino Rack Roof Rack part # RR25GR. Most customers that are concerned about wind noise will choose aerodynamic crossbars.
This roof rack features quiet, aerodynamic aluminum Vortex crossbars that have built-in top channels that can accommodate channel-mounted carriers and accessories. This roof rack includes locking legs that help deter theft. I have attached a link to a product review video... view full answer...
I contacted Swagman and they told me that you will be able to install the Swagman Upright Bike Rack # S64720 on your Yakima Round Bar Rack with a 24 inch crossbar spread.
The connection points on the Swagman rack are adjustable along the rack. The Upright rack will connect to round, square, aero, elliptical, and most factory crossbars. view full answer...
For your 2013 Hyundai Genesis, we carry a few different two bike racks that would work well for you.
The Swagman Titan 2 Bike Carrier, # S63400, that you referenced will work well on your Genesis. The rack can carry 2 bikes with a total weight capacity of 35 pounds per bike. The rack itself is light weighing about 30 lbs.
I also like the Kuat Beta Folding 2 Bike Rack, # B202-114. The Beta has an all aluminum construction that makes is one of the lightest 2 bike racks at 12.6 lbs. This... view full answer...
The Thule OutWay 3 Bike Carrier, # TH56BV, would make a great choice for carrying 3 bikes on the rear of your 2009 Hyundai Genesis Sedan. The trunk mount racks are a good option, if you will not need to access the trunk area of the vehicle while traveling with the bikes on the vehicle.
You would need to purchase a bike adapter bar, like part # TH982XT, for each bike that does not have a horizontal top tube that will slide over the bike rack arms. We have a video, see link, that shows this... view full answer...
Go To Results