Expert Answers about Pontiac G8

• Availability of Trailer Hitch Pictures for a 2008 Pontiac G8 GT and Bike Rack Recommendation
• We have not had the opportunity to take pictures of the Draw-Tite Class I Trailer Hitch, item # 24821, installed on a 2008 Pontiac G8 GT yet, but we do have pictures of the Curt Class I Trailer Hitch, item # C11138, installed on a Pontiac G8 GT. That's the picture I attached. The Draw-Tite is fairly similar but the crosstube sits back a little so it isn't as obvious. In my opinion, if the GXP rear bumper/diffuser does not hang lower than the rear fascia on the G8 pictured on the # C11138,...
  view full answer...


• Floor Mat Recommendation for a V6 2009 Pontiac G8
• The WeatherTech Front Auto Floor Mats # WT442251 that you referenced have been confirmed to fit all models of the 2009 Pontiac G8 so they would work great on your V6 2009 Pontiac G8. For a matching set for the rear of your vehicle you would want the part # WT442252.
  view full answer...


• Comparing Rhino Rack RLT and RLCP Roof Rack Leg Kits
• The difference between RLT and RLCP Rhino Rack legs is how they mount. The RLT feet, like # RLT500, fit in special Rhino Rack tracks and are held in place with barrel nuts. The RLCP legs are designed to fit fixed points or factory tracks on vehicle roofs though they can fit in Rhino Rack tracks. Normally the RLT bars are associated with the more heavy duty square Rhino rack bars and the RLT feet are associated with the Aero bars they each foot style could support both bars styles. The...
  view full answer...


• Hitch Recommendations For 2008 Pontiac G8
• We do have a couple of solutions for your 2008 Pontiac G8's hitch application. Keep in mind, all of the hitches designed for your G8 are Class I, such as the Curt # C11138 which has a 1/1-4" receiver tube, 200 lbs. of tongue weight, and 2000 lbs. of gross trailer weight. If you're determined to use a Class II or Class III bike rack or cargo carrier with this Curt hitch, it is still possible. Curt hitches do not come with the weld stop inside the receiver tube that is otherwise typical...
  view full answer...


• How Is Jeep Style Fender HP99VR Mounted to the Trailer
• Single axle fender # HP99VR is a weld on application, so it is intended to be mounted by welding it directly to the side of the trailer using a wire feed or stick style weld. I would recommend using a certified welder in your area.
  view full answer...


• Will the Superchips Flashpaq F5 Tuner Disable the Displacement on Demand Feature on 2009 Pontiac G8
• I spoke with my contact at Superchips and he said their Flashpaq F5 Performance Tuner, # SU5845, will allow you to disable the Displacement on Demand feature on your 2009 Pontiac G8 GT V8. This would get you by until you decide to change out the parts.
  view full answer...