bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Oldsmobile Bravada


  • Do Covercraft SeatSaver Custom Seat Covers # SS2246PCSA Fit 2002 Oldsmobile Bravada
  • The Covercraft SeatSaver Custom Seat Covers # SS2246PCSA DOES fit your 2002 Oldsmobile Bravada, the picture we have is a "typical photo" designed basically to show how it might fit a standard style of seat and to show a color.
    view full answer...

  • Recommended Towing Mirrors for a 2003 Oldsmobile Bravada
  • I recommend using the K-Source Universal Towing Mirror # KS3891 for your 2003 Oldsmobile Bravada. It clips on over your existing side mirrors and has a ratcheting strap system to keep the mirror nice and secure. This univeral fit mirror is designed to fit most mirrors that are between 4-1/2 to 11-1/2 inches tall. You can use it on either side of your vehicle so if you are wanting a mirror on both sides make sure you order two! The great thing about these mirrors is that since they are universal...
    view full answer...

  • Installation for 2002 Oldsmobile Bravada Drivers Side Replacement Mirror # KS62038G
  • The replacement mirror you referenced, K-Source Replacement Driver's-Side Mirror # KS62038G, installs using the original factory hardware and mounting points. This replacement mirror plugs in to the existing wiring on the car and retains the same functions that were on the original.
    view full answer...

  • Can Slightly Smaller Spare Tire be Used on Trailer to Get Home
  • Generally, I do recommend that all tires on your trailer be the same size at all times, so ideally your spare will match the existing tires on your trailer. With that being said, the difference between a 175/80-13 and a 175/80-13 tire is only 0.3 of an inch, so if needed in an emergency, the 175 spare tire should be fine to get you home. To be on the safe side, I do still recommend obtaining a matching spare tire when you are able. I have attached a link that will take you to our available...
    view full answer...

  • Replacement Hardware Kit for Westin Safari Light Mounting Bar on a 1998 Oldsmobile Bravada
  • If you have the Westin Safari Light Mounting Bar # 30-0005-1065 or # 30-0000-1065 then the correct replacement mounting hardware kit is part # 30-1255. If you happen to have something else on your 1998 Oldsmobile Bravada then we unfortunately don't have a solution other than to purchase one of these kits brand new to replace your current setup.
    view full answer...

  • Brake Controller Installation for 1999 Oldsmobile Bravada
  • The 1999 Oldsmobile Bravada wasn't equipped with prewiring for a brake controller. The easiest installation would be the Curt Echo, part # C51180 which works wirelessly, using your smart phone as the in-cab control unit. As long as your Bravada has a functioning 7-way trailer connector with functioning 12-V power on the pin in the trailer connector pin in the 1:00 position, the Curt Echo will be a plug and play installation that's even simpler that what you're looking for. If you used...
    view full answer...

  • 12 Volt Power All the Time On Brake Output Circuit with Curt Brake Controller on 1999 Olds Bravada
  • There should not be power on the brake output wire unless the brake controller is sending back power. It sounds like something might be miswired at the 7-Way. Take a look at the picture I have included that shows the pin out of a vehicle side 7-Way trailer connector to make sure yours is wired the same way. If it isn't then put the wires in the appropriate places. Also check to see if any of the wires are touching each other inside the 7-Way. And if the 7-Way is dirty or corroded that...
    view full answer...

  • Will Trailer Wiring Harness # 118384 Fit Vehicles Without a Factory 7-Way Trailer Connector
  • The trailer wiring harness # 118384 installs into the standard round factory connector. I've attached a couple of pictures of what it looks like. One with a cap and the other is the connector itself. If your vehicle has the round connector, then the harness will work for you. Some are equipped with the connection port even if the vehicle didn't' originally have a 7-way trailer connector. If it does not have the connector, then you can hardwire a 4-way connector on using # HM41225....
    view full answer...

  • Attaching a 7-Way Trailer Wiring Harness to a 2000 Oldsmobile Bravada
  • It sounds like your 2000 Olds Bravada did not come with a factory installed 7-Way wiring harness. The Tow Ready Custom Fit Vehicle Wiring, # 118384, is designed to plug in line on a vehicle that has a 7-Way wiring harness already installed on it. It then provides a 4-Way wiring harness. It could still potentially work but you will need to make sure that the white wires are grounded to the vehicle frame in a spot that is clean and free from corrosion. A better solution would be to use...
    view full answer...

  • Can Kenda ST145R12 tire AM10140 w/12 Wheel LH45FR Replace 5.30-12 Wheel/Tire On Karavan Trailer?
  • It sure will! The Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire - Load Range E # AM10140 you were looking at has an overall height of 21.3" and a width of 5.7" which is .6" shorter and .1" wider than your current 5.30-12 tires. The Aluminum Lynx Trailer Wheel - 12" x 4" Rim - 5 on 4-1/2 - Silver # LH45FR would be a great choice to go with this tire. You would need to have them mounted at a local shop upon arrival. Since you mentioned that your Karavan Bunk Trailer has the 5 on...
    view full answer...

  • How to Check Brake Switch Wire to See if it Goes to Ground When Installing Curt Brake Controller
  • I spoke with my contact over at Curt about how you can test to see if the wire goes to ground when the pedal is up. You will need a multimeter, such as # PT89ZR, and set it to test for resistance (ohms). With the pedal up the correct wire will have a few ohms of resistance (he said 5 or 6 usually). If it shows zero then that means it goes to ground when the pedal is up and it is not the correct wire. He also added that it probably is not going to be an issue on your 1999 Olds Bravada but...
    view full answer...

  • Parts Needed To Install a 7-Way, 5-Way and 4-Way On a 2000 Oldsmobile Bravada
  • You will need the Reese Replacement 7-Way RV-Style Trailer Connector # A10-7072VP on your 2000 Oldsmobile Bravada if you have the factory wiring connector behind your bumper. If your Bravada does not have the factory tow package wiring you will need the Universal Wiring Harness w/ ModuLite and Brake Controller Harness - 7-Way Trailer Connector # 22551. Both of these will give you a 7-way connector which you can then use an Adapter # 37385 when you have a trailer with a 4-way or 5-way flat...
    view full answer...

  • 2002 Oldsmobile Bravada Hitch Recommendation
  • Yes, the Curt Hitch part # C13300 that you referenced has been confirmed as a fit for the 2002 Oldsmobile Bravada so it would work well for you. I attached an install video for this hitch that shows it being installed on a similar vehicle.
    view full answer...

  • Brake Controller Recommendation for a 2002 Oldsmobile Bravada with Factory Tow Package
  • Brake controllers are not vehicle specific so you can use any one that you want. What I recommend is a proportional brake controller. The way a proportional controller works is it applies the trailer brakes in proportion to how much your Bravada is braking. this is the safest way to stop and it reduces wear and tear on the trailer and vehicle. Our most popular proportional controller and what I recommend is the Tekonsha P2, # 90885. This controller is very easy to set up and use. I have...
    view full answer...