The K Source Universal Clip-On Mirror, # KS3891, features a convex mirror on all of them. In other words they are all the type that have glass like a passenger side mirror (objects in mirror are closer than they appear). If the one that looks distorted is on the driver side then what you are noticing is the the difference between regular flat glass placed right next to convex glass. They will look different by comparison.
If you have the 2 towing mirrors next to each other the reflections... view full answer...
The # RP30051 Sliding Fifth Wheel Hitch includes the slider, the head unit, the pins and clips needed to secure the hitch into the bed rails and the hardware to attach the head to the slider. I have produced a photo showing the hardware included with the hitch.
The install kit for the fifth wheel hitch, part # RP30035 is not included.
You will also need a trailer connector installed in your truck bed, part # 20023.
To see the instructions for the install kit, click on the provided link. view full answer...
Ordering the Cover Craft SeatSaver # SS2403PCCT would provide you with a complete front seat kit, with covers for both front seats. view full answer...
The K-Source Universal Towing Mirror part # KS3891 is only for one side of the vehicle, drivers or passengers. For the pair you would want part # KS3891-2 as this kit comes with two mirrors one for each side of the vehicle. view full answer...
The TruXedo Stake Pocket Covers for 1999-2013 GM Full Size Trucks part # TX1704212 only comes in a kit of four so if you have six stake pockets you will need to order two kits and just have a few extras. view full answer...
When it comes to installing a trailer hitch on your 2022 Toyota Highlander The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e75ZR is confirmed for your vehicle.
This hitch has a simple bolt-on installation with no welding required, the hitch has a matte black powder coat finish over a protective base coat which offers superior rust resistance.
When it comes to the trailer wiring The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector... view full answer...
When it comes to The Bearing Block for your Schwinntec inverted slide system The Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060.
This system will replace the standard bearing block kit for Lippert In-wall slide-out systems. We do not currently have any other parts that will work for you. view full answer...
Yes, we do sell the auto changeover regulator that comes with the GasStop Emergency Propane Shut-Off Gauge Set part # GS69FR, it's the JR Products Compact Automatic Changeover 2-Stage Propane Regulator part # 37207-31525. This one isn't made in the USA but we do have one that is, the MB Sturgis High Capacity Two-Stage Auto Changeover Regulator part # 888001-MBS which comes with a one year warranty. view full answer...
I can confirm the Kenda ST205/75D14 Bias Trailer Tire w 14" White Spoke Wheel - 5 on 4-1/2 - Load Range C # AM3S455 does have the Kenda K558 ( # AM1ST52 ), but the wheel technically will not include the red and blue stipes like the # AM20352. Other than that though, they are both Dexstar wheels and have all the same capacities and sizes, they just do not have the stripes with this tire/wheel combo. view full answer...
Yes. The B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1111 comes with the Turnoverball gooseneck hitch ball included. You can turn over the ball and store it inside the hitch, so you'll be able to keep the inside of the gooseneck receiver free from dirt and debris, plus you'll always know where the ball is stored. view full answer...
Yes, I cannot speak for our competitors but I can assure you that the Brophy Cable Camper Jacks part # CJ41 do come with the upright poles and all of the other parts you will need to lift your truck bed camper on and off your truck. The components that you see in the attached photo are all included. view full answer...
Yes, the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2002 Chevrolet Silverado does come with all of the mounting hardware that you need for installation. This hardware bag consists of carriage bolts, hex head bolts, flange nuts, and conical tooth washers. view full answer...
I just spoke with my manufacturer's representative, who tells me to get the bulb out, you hold the ceiling around the light with one hand while pulling directly down on the lamp. The springs are intentionally very stiff to hold the bulb in place. view full answer...
The Curt # C16545-16021 Q24 5th wheel hitch you'd looked at is indeed a complete hitch which includes the legs that would attach to the factory pucks in the bed of your 2022 Ram 3500 Long Bed.
The legs/feet are easier to see in the linked product description video.
You might also want to install a 7-way trailer connector in the truck bed, so you won't have to run the trailer connector cable up over the tailgate. You can install an in-bed 7-way using part # C56000. view full answer...
The Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red # RM-152-LED-7 does not come with white LED bulbs and only red replacement LEDs are offered for it. We do have the Roadmaster Tail Light Wiring Kit with Bulbs # RM-155. The bulbs are white but not LEDs. view full answer...
Yes, the Go Power Industrial Pure Sine Wave Inverter Charger, # 34275013 does come with a fixed-mount remote to monitor and control the inverter charger from inside your RV. view full answer...
The Advent Air RV Air Conditioner, # ACM135 does not come from the factory with a start capacitor. However, one can be added with the Start Capacitor for Advent Air RV Air Conditioners, # ACMSCKIT. Please note the attached image of one installed to compare to your unit. If you are not the original owner, the previous owner may have installed one and the image will show you what to look for. Happy Camping. view full answer...
The Stackers Leveling Blocks w/ Bag for Trailers and RVs part # A10-0920 does not come with any wheel chocks. That said, we do offer this separately using the Wheel Chock for Stackers Leveling Blocks part # A10-0922. view full answer...
The Replacement 3-Wing Hand Knob # 753-0745 that you referenced is sold individually. The one customer who had a bag of these delivered had ordered several of them. view full answer...
The Roadmaster Rear Anti-Sway Bar # RM-1139-173 contains the polyurethane bushings and mounting hardware to install onto your 2017 Ford F-250. The only extra item you would need is the end link kit. The sway bar and end link kit is available in one package, the Roadmaster Rear Anti-Sway Bar and End Link Kit
# RM-1139-173-00.
This kit will be everything you need to install the rear anti-sway bar on your 2017 Ford F-250. view full answer...