Yes, the Rhino-Rack Ski and Snowboard Carrier item # RR574 is compatible with the Rhino-Rack ROC25 Roof Rack for Naked Roofs item # RR73MR.
The Rhino-Rack ROC25 Roof Rack for Naked Roofs item # RR73MR is confirmed to fit the 2013 VW Jetta sedan. This kit mounts directly to the side of your roof without drilling and has more than enough capacity for a ski rack carrier. It has a flush design which means the crossbars do not extend past the mounting feet.
I have linked an installation video... view full answer...
We do have an Edge performance chip that works with the 2001 Volkswagen Jetta. It's the Insight CS2 Comprehensive Gauge Display - Color Screen, part # EP84030.
It plugs into your Jetta's OBD-II port and reads dozens of parameters supported by your vehicle's engine control module. It has a hi-res color screen and displays up to 8 parameters at once.
It is compatible with all models. This is not a programmer, though. It is a monitor, so it might not be exactly what your are looking for. view full answer...
You are correct. The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - 2", part # 306-X7311, is compatible with your 2015 Volkswagen Jetta TDI. It has a maximum tongue capacity of 300 lbs and a maximum gross trailer weight of 2,000 lbs. With regard to this hitch receiver, just like Torklift, our website does not differentiate between the TDI and the non TDI versions of your 2015 Volkswagen Jetta. It fits both trim levels. We differentiate between other hitch receivers compatibility... view full answer...
The Roadmaster InvisiBrake Supplemental Braking System # RM-8700 that you referenced could certainly work in your 2002 Volkswagen Jetta. I attached an install video on a similar vehicle for you to check out as well.
It sounds like you have the big components for your flat-towing setup, but you may also be interested in a lighting solution and safety cables.
For a permanent lighting solution that would function in a similar way as the Invisi-Brake check out the Roadmaster Tail Light Wiring... view full answer...
The Yakima universal MightyMounts, # Y03590, do fit the factory roof rack on a 2017 Volkswagen Jetta. I have included a link to the installation instructions for you. view full answer...
The Malone Profile18B Rooftop Cargo Box part # MPG911 will store up to 18 cubic feet of cargo. The external dimension of the box are 78-3/4" long x 32-3/8" wide x 15-3/4" tall. The box weighs 35 lbs and can support up to 165 lbs of gear through you will need to check your vehicle's roof weight capacity for compatibility.
As long as the crossbars on your 2015 Volkswagen Jetta are between 24" to 36" apart and the crossbars are of a standard size then the above box should provide just enough... view full answer...
I checked with Draw Tite and their hitch part # 24978 that you referenced is a fit for all versions of the 2019 Volkswagen Jetta including your GLI 35th anniversary edition so it will fit and work well. view full answer...
Yes, the Curt Trailer Hitch Receiver part # C11070 is a fit for a 2004 Volkswagen Jetta TDI. It will work great for towing or hitch mounted accessories like bike racks and cargo carriers. I have attached an install video below on a slightly older model but the install will be the same as a 2004. view full answer...
We do have a trailer hitch receiver that fits your 2007 Volkswagen Jetta Wolfsburg, so long as it is the 4-door sedan and it does not have the diesel engine. If your '07 Jetta Wolfsburg meets those specs the correct trailer hitch fit is the Curt Trailer Hitch Receiver # C11474.
I confirmed this fit for you with the manufacturer, and if you plan on doing some towing with your Jetta, there are a few other parts you'll need:
- T-One Vehicle Wiring Harness # 118667
- Curt Drawbar # C45520
-... view full answer...
Yes, the Draw-Tite Trailer Hitch Receiver # 24978 is a fit for your 2019 Volkswagen Jetta so it is going to be great hitch for you. The purchase here at etrailer.com is very simple - just hit add to cart and then click on the cart and you're all set.
I have added a link to the installation instructions for you to check out as well of the Draw-Tite Trailer Hitch Receiver # 24978. view full answer...
Yes, the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRVA118B-2, the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA, and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs # DK306 is the roof rack setup that you will need to transport 2 kayaks with your j-mounts on your 2013 Volkswagen Jetta. As far as the sunroof clearance, I confirmed with Rhino-Rack that you will be able to move your sunroof forward and back, but you will not be able to use... view full answer...
I will start by saying that the Curt Hitch # C11540 will fit the VW Jetta line from 2019 to 2021 as long as it is not a GLI model and or with dual exhaust. As long as don't have one of these, you are good to go. The wiring is a different matter though.
I checked with Curt and they do not offer a custom fit wiring harness for this year range of Jetta, so I recommend going with the Tekonsha T-One Vehicle Wiring Harness # 118791. This is a direct plug an play kit, but you will need to run... view full answer...
I have a solution for you and a great hitch for your 2021 VW Jetta with dual exhaust but the Curt Trailer Hitch item # C11540 you were looking at will not fit. Instead you will want the Draw-Tite Sportframe Trailer Hitch Receiver item # 24978. This hitch is custom fit and bolts to your Jetta with included hardware. It mounts behind the rear bumper instead of below your frame. This gives you better ground clearance and appearance. The Draw-Tite hitch also avoids any compatibility issues... view full answer...
The Yakima BaseClip Fit Kits that go with a Yakima roof rack on your 2017 Volkswagen Jetta are the BaseClip Fit Kit # Y06126 and # Y06137, like you mentioned, and we do have the correct replacement foot pad, though it's different than what you stated.
The correct part for your application is the Replacement Foot with #5 Pad for Yakima BaseLine Roof Rack Tower # 8880646. view full answer...
I spoke with my contact at Curt and they said that the Curt Trailer Hitch Receiver # C11474, will fit the 2012 Volkswagen Jetta GLI Sedan. I am including a link to the installation instructions on the # C11474 hitch.
The Curt does not include the recommended ball mount, # 3593. If you will be towing with this hitch you will also need the Tow Ready 1-7/8 Inch Hitch Ball, part # 19256, or Tow Ready 2 Inch Hitch Ball, part # 19258, depending on the coupler size of the trailer. view full answer...
Yes the Camco Premium RV Drinking Water Hose # CAM22833 connects to a standard spigot found on the outside of a house or RV park. It is similar to a garden hose except meant for RV drinking water lines. I have linked a video review for you. view full answer...
To install a Rhino Rack 2500 Series Square Crossbar Roof Rack on your 2011 Volkswagen Jetta you need parts # RRVA118B-2, # RRRLKVA, and # DK306.
That will give you the complete roof rack with crossbars. Let me know what you plan to put on the rack and I'll recommend a specific carrier that fits the bars for you. view full answer...
It was a smart idea to check, and when we test fit the Curt Hitch # C11474 on a similar model year Volkswagen Jetta we found the distance from the hitch pin hole to the edge of the bumper was 5 inches, and the T2 Classic requires that distance to be 3-1/2 inches or less. That said, we do have a very similar 2-bike rack that will work for you! So what you can use for your 2016 VW Jetta GLI SE is the following:
- Curt Trailer Hitch Receiver # C11474
- Kuat Sherpa 2.0 Bike Rack for 2 Bikes... view full answer...
We do not currently (Oct 2023) have a hitch for the 2010 VW Jetta TDI. The # C11474 that you referenced only excludes the TDI version.
If you can let me know what you need to do, I can help you with a trunk mounted bike rack or a roof rack if that would help meet your goals. view full answer...
It's difficult to give an exact time, and "quickly" can be pretty subjective in regards to putting on or removing the Saris rack you asked about:
- Sairs Bones EX 3-Bike Rack - Trunk Mount # SA803
The first time you install it is going to be quite a bit longer, maybe 10-15 minutes or so. But once you get used to exactly what you have to do to install it on your 2020 Volkswagen Jetta, it will take very little time, maybe a few minutes or less as you'll know precisely where the straps go,... view full answer...
Go To Results