The best wiring harness for your 2018 Volkswagen Atlas is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118754 because we have found that the manufacturer, Tekonsha, makes the most reliable wiring harnesses in the industry.
Additionally, I also highly recommend using Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector; using it will increase your 4-way's durability and extend its lifespan.
I can also confirm... view full answer...
For your 2019 VW Atlas with raised side rails I highly recommend going with an option from Yakima, which consists of the Yakima Jetstream Crossbars # Y00426 and TimberLine Towers for Yakima Crossbars # Y33TR.
This will give you a roof rack which not only looks great but uses aero bars with ridges that helps give you a very quiet ride. The bars are 60" long to fit the width of your Atlas and have T-slots which will allow you to use channel-mounting accessories.
I also recommend using SKS... view full answer...
For your 2024 VW Atlas I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76176. This is a Class IV hitch with a 2" receiver and a bolt-on installation. It has a max gross trailer weight of 6,000 lbs, tongue weight of 900 lbs, and comes with a limited lifetime warranty.
In addition to the hitch you will also need wiring. The Tekonsha T-One Vehicle Wiring Harness # TK89FR is the most reliable option available. This plugs into the connection points in your rear cargo area. Once... view full answer...
We do indeed offer a hitch for the 2020 VW Atlas Cross Sport. I'd recommend the Curt Class III hitch, part
# C93CR. For a trailer wiring harness, use the # C56383. For a ball mount, I'd recommend the # C45030 and the # PC3 hitch pin. For a hitch ball, use # 19260 for a 1-7/8 or # 63845 for a 2 inch ball. view full answer...
Yes, for your 2019 Volkswagen Atlas, the Thule WingBar Evo Crossbar System part # TH711400 and part # TH710401 would be a good option so you can open your glass roof. view full answer...
Since we have not yet had a chance to install Curt 4-Pole wiring harness # C56383 on a 2018 VW Atlas we do not yet have a video to share with you to show the scuff panel removal. I was not able to access an online owner's manual for the 2018 Atlas but it is possible that the printed manual that came with your car may have details about trim panel removal. As you noted, Curt's written instructions (Step 3) are not very detailed about the removal of this plastic trim piece so I contacted... view full answer...
I have a solution for you. I confirmed with Yakima that they currently do not have an engineered fit that will allow you to use your Yakima crossbars like the Yakima JetStream - 50" # Y00425 from your 2018 Jeep Grand Cherokee on your 2022 VW Atlas Cross Sport with flush rails. This is because they have not had the chance to do testing for fits with particular towers and landing pads on the 2022 model.
However, if you are looking for a different setup that is confirmed to fit, I recommend... view full answer...
You are not doing anything wrong at all; with the Draw-Tite Max-Frame Trailer Hitch Receiver # 76176 that fits your 2021 VW Atlas, it is possible that on some vehicles the fascia will need to be trimmed in order for the receiver to protrude properly.
That isn't the case with all, but for whatever reason, Draw-Tite did not mention this in the instructions. So you'll want to measure the area so the # 76176 receiver can extend correctly, likely about a 3-1/2" wide x 2-1/2" long section. view full answer...
While there isn't a Rhino Rack platform that's larger that fits your 2018 Volkswagen Atlas we do have the Thule Caprock part # TH98YE and the part # TH710401 that is a confirmed fit and is 74-3/4 inches by 59 inches. This is a very similar platform to the Rhino Rack but it's the size you are wanting. view full answer...
That's a pretty common question as it is simpler than running the 12 volt hot lead to your battery, but you cannot use the drivers side cargo area power port on your 2022 Volkswagen Atlas to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C67WR.
The reason why is this is the only way to ensure your VW's wiring is not otherwise affected (by tapping into it) and that you have consistent 12 volt power. view full answer...
The Universal Installation Kit # ETBC7 will allow you to convert your 4-way flat wiring harness on your 2021 Volkswagen Atlas to use with trailers that have a 7-way connector. The connector will also retain a 4-way connector so you do not have to disconnect the wiring to use with a 4-way trailer or have to carry an adapter. Included in the installation kit is the additional wiring needed to run the wiring for the charge line portion of the 7-way along with wiring needed to install a brake... view full answer...
For your 2019 Volkswagen Atlas I recommend the etrailer Trailer Hitch # e68AR, which is a 2 inch hitch and perfect for carrying a bike rack or other accessories. view full answer...
I recommend K-Source Universal Towing Mirror part # KS3891 to use on the 2018 Volkswagen Atlas because they are an easy tool free installation option that does not require hardware. They just clip on the factor mirrors with the provided straps as long as they are between 4-1/2" to 11-1/2" tall. I have attached a video for your reference. Please keep in mind they are quantity of 1 so you need to purchase 2 to have the set.
The K-Source Universal towing mirror is a great option for vehicles... view full answer...
For your 2021 Volkswagen Atlas we have the Draw Tite hitch part # 76176 that is rated for weight distribution but the Curt you mentioned is not rated for it so it can not be used with it.
With this hitch you could use a system like the Reese Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs and has the best sway control at preventing sway before it starts. view full answer...
I reached out to Firestone and the air bags used in the # F4175 are not available by themselves.
To replace them you'll need an entire new kit # F4175.
The most common reason your bags would both rip or pop is due to under inflation. They need to have a minimum of 5 PSI air pressure at all times, so it's recommended to double check the air pressure every month. A 10 degree change in weather can change the PSI in the air bags by 1 PSI so if you're really keeping them at 5 PSI I'd be checking... view full answer...
The Curt Class II Euro Style Drawbar # C45562 requires a 1/2" hitch pin like the one included with the Reducer # HT02. You will need a 5/8" Pin # C21500 to secure the reducer in your 2" receiver. view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 118754. See install video link attached to this page.
Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.
If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller... view full answer...
While there isn't a way to completely mimic how a weight distribution hitch works, you can use a friction sway control system for a safer way to tow with your 2022 VW Atlas, and you'll also need a bracket that goes over your ball mount:
- Reese Friction Sway Control Kit # 83660
- Reese Sway-Control Bracket for 2" Ball Mounts # RP26003
Then to help with any suspension sag, what you can do is add air springs to the coils, the Firestone Coil-Rite Air Helper Springs # F4175. view full answer...
The Curt ball mount kit part # C45534 would be a great choice for your 2019 Volkswagen Atlas. It gives you a ball mount with a 2 inch drop with plenty of weight capacity and includes a hitch lock. view full answer...
That is a really sharp angle for your trailer and weight distribution system to be backed in with. The Fastway e2 Weight Distribution item # FA94-00-1000 can be backed up without unhooking but it sounds like you have bent something. I would first check your round bars and brackets that attach the bars to your trailer to make sure they are not bent or damaged. If everything looks ok you should go back and readjust all the brackets and make sure you follow the original set up instructions... view full answer...
Go To Results