The Inno # IN66FR fishing rod holder isn't a vehicle specific item, so Inno doesn't list individual vehicle fits. This being said, you can easily take a measurement to determine if the rod holder will fit.
The fishing rod holder will mount to the anchor locations used by the grab handles above the rear doors (the grab handles will be removed to install the holder, which will use the handle mounting holes to attach to the vehicle). The distance between the base of your driver's-side and... view full answer...
The Viking Solutions Adjustable Fishing Rod Carrier for Truck Beds - Aluminum - Black - 6 Rods # VS54FR does not allow for the rod holder angle to be adjusted but does allow for custom spacing between the holders. If you want the angle adjustment, then the Viking Solutions Fishing Rod Carrier for Truck Beds - Wall Mount - Aluminum - 10 Rods # VS84FR is a better option. view full answer...
The height from the top of the top mounting bracket on the Jif Marine Fishing Rod Holder # JIF82FR to the top of the rod holder is approximately 1-7/8". view full answer...
If you don't have hand holders for an inside fishing rod holder, like the Inno INIF8, then I recommend installing a Malone roof rack, part # MPG202 for square or part # MPG215 for aero, and then using a roof mount holder like the Rhino-Rack Multipurpose Holder # RMPH or Fishing Rod Carrier # RR572. view full answer...
The closest option we have available to what you are wanting is the CE Smith 80 Series Fishing Rod Holder # CE53680SA. This swivel-bottom, flush-mounted rod holder features a tube inner diameter of 1-7/8 inches and an overall length of 12 inches. It also has a sturdy stainless steel construction that will be resistant to any rust or corrosion over time.
This represents both the longest and largest inner tube diameter fishing rod holder we currently have. view full answer...
First thing you'll need is a roof rack installed on your 2010 Ford F-150 so that you can also install a fishing rod holder. For that you'd want the Rhino Rack part # RRVA150B-2, # RRRLKVA, and # DK150 that you referenced for the roof rack as this gives you a high quality roof rack that's easy to install and has aero shaped crossbars to minimize wind noise.
Then we have the Rhino Rack fishing rod holder part # RR574F which would work well to carry up to 8 rods. I attached a review video... view full answer...
For a basic roof rack system to haul fishing rods on your Corolla I would recommend the SportRack # SR1002 roof rack with 50" crossbars. To that add the Rhino-Rack # RR572 4-pole locking fishing rod holder.
Optionally you could use the Rhino-Rack # RR573F 5-pole holder or the Rhino-Rack # RR576F 11-pole holder. view full answer...
The Rhino-Rack Ski and Fishing Rod Holder # RR572 is a great way to carry Skis and Fishing Rods. I like that Rhino-Rack has several different sizes available to fit your needs to how many skis or rods you need to carry. The mounting system will attach to the Crosstrek's cross bars whether they are factory or aftermarket aero, square or round bars. The included locking feature makes this one stand out compared to others available.
If your son ever plans to carry a snowboard you might... view full answer...
The Classic Accessories Float Tube part # CA32001 does actually come with two rod holders for your fishing poles so you have a place to hold them while not in use. view full answer...
From the bottom of the rod holders on the Yakima TopWater Rooftop Fishing Rod Carrier # Y04088 to the bottom on the case is going to vary since there are different sized ridges. From the holder down to the lowest ridge is approximately 5". Fromthe holder down to the center flat ridge it's approximately 4-3/4". From the holder down to the two rounded ridges it's approximately 4". view full answer...
The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish.
The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing... view full answer...
Surely!
The 60" WingBar Evo Crossbars # TH711520 and Rapid Gutter Feet # TH93ZR for your 2008 Jeep Wrangler Unlimited Hard Top is an excellent choice and is compatible with pretty much every fishing rod holder designed for a roof rack.
I recommend checking out the Yakima ReelDeal # Y04089 for a simple carrier or the Yakima TopWater # Y04088 if you need something that offers a little more protection. Both carriers have a locking feature but the TopWater is a whole box so you'd have to... view full answer...
The 70 Series Fishing Rod Holder # CE53672A weighs just over 1lb.
The rest of the dimensions are Length: 9", Tube inner diameter: 1-5/8", Tube outer diameter: 2", Mounting flange dimensions: 44-1/2" long x 3-5/8" wide. view full answer...
The Rhino Rack Ski and Fishing Rod Holder # RR572 and other ski, snowboard or fishing rod carriers that mount on crossbars are sold in pairs- 1 for the front crossbar and 1 for the rear. view full answer...
The Rhino-Rack Ski and Fishing Rod Carrier # RR572 uses clamps to install on industry-standard roof racks so it can easily be transferred between different vehicles. This is compatible with the OEM roof rack on your 2020 Subaru Outback Wagon but you can use it on another vehicle as well if the need arises. view full answer...
I have the perfect rooftop mounted accessory that will allow you to carry both skis and fishing rods on the roof of your 2014 Kia Soul. For this, I recommend using the Rhino-Rack Ski and Fishing Rod Carrier part # RR572 for 2 pairs of skis or 2 fishing rods, part # RR574 for 4 pairs of skis or 4 fishing rods, or part # RR576 for 6 pairs of skis or 6 fishing rods. view full answer...
I spoke with the manufacturer, Rhino-Rack, and they stated that the rubber on the Rhino-Rack Fishing Rod Carrier - Locking - 5 Fishing Rods Item # RR573F will squeeze down to fit a max of 1" diameter tube. view full answer...
The Rhino-Rack Locking Ski Carrier and Fishing Rod Holder # RR576 fits on many different bar shapes and sizes. As an example, it will fit the Rhino-Rack Aero bars which are 3-1/8 inches wide. So the 2-1/2 inch wide bars on your 2014 Honda CR-V will be no problem. view full answer...
Yes, the Rhino-Rack Fishing Rod Carrier # RR576F will absolutely fit the 2-3/4 inch wide & 36 inch long crossbars on your 2003 Ford Expedition without any issue.
I have added a link to a video review of this carrier for you to check out as well.
- Rhino-Rack Fishing Rod Carrier - Locking - 11 Fishing Rods # RR576F view full answer...