No, you do not! The repeater included with the iN-Command TPMS item # NCTP100 you were looking at has a range of 100' front the monitor to the sensors. view full answer...
No, sorry you can not. The 2" receiver that comes with the Stealth Hitches item # SH27FRT can only be used for accessories like bike racks and cargo carriers. It's only been built to withstand the vertical force put it on by accessories.
You'll have to use the included ball mount to tow. There's no other options or any way to do any height adjustments with the hitch.
The Stealth Hitches item # SH27FRT has been confirmed to fit the 2021 Volvo XC90 Recharge. I have linked an installation... view full answer...
Sandra, what you're going to need to do is adjust the hitch to redistribute more of the weight to the front of the truck. I've included a video that shows how the hitch will redistribute the weight when installed properly and an instruction link showing how to adjust the hitch head which starts on page 14. view full answer...
While the Malone AirFlow2 Roof Rack # MAL84AR does include its own locks for securing the roof rack to your 2017 Toyota RAV4 you will need the Thule One-Key System # TH450200 to secure the Thule Hullavator Pro Kayak Roof Rack # TH898 to the crossbars. view full answer...
To get a 7/4 connector on your 2018 Mercedes-Benz Sprinter Steve, you are going to have to combine the Tekonsha OEM Replacement Vehicle Wiring Harness # TK22115 with the 7- and 4-Pole Trailer Connector Socket # HM40975. The connector will connect directly to the Tekonsha wiring. If you are going to need a brake controller check out the Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness # RED63RR as it will plug directly into the harness included from Tekonsha. view full answer...
Hey Greg,
Gen-Y has you covered with the 1-7/8" hitch ball # 325-GH-090 which can bolt on to any of their 2-ball mounts, like the one included with the Phantom X Adjustable 2-ball mount # GY95XR. view full answer...
Although we do not have one that comes with it under a single product number like the # EQ64FR, it is simple enough to put it together. The Equal-i-zer Weight Distribution # EQ37141ET does not include a shank so you can add whichever one you need. We have the following available for a 2-1/2" receiver:
-Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop # EQ90-02-4700
-Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop # EQ90-02-4900
-Equal-i-zer Weight Distribution... view full answer...
Hey Dwayne, so the great thing about trailer jacks is that basically where there's a will there's always a way. So what that means is that if you want to use the etrailer jack part # MJSQ-2500B on your trailer you certainly could. You could possibly get lucky and be able to use the included bolt on brackets but worst case scenario you could weld the jacks to the trailer. view full answer...
Hello Marcus. As far as the Malone EcoLight Trailer, there really is no way to upgrade the hubs beyond the standard grease hubs that it comes with.
It may be possible to use slightly larger tires and wheels, but that will completely depend on the amount of clearance between the tire and the fender. Ideally you want 3" between the tire and the fender, and at least 1" between the inside of the tire and the frame of the trailer.
The 4.80/4.00-8 tires that come with the EcoLight are 4.7"... view full answer...
Hey Glenn,
The Hub Bearing Kit # BK2-100 comes with a cotter pin and a tang washer so that you can prevent either a standard nut or castle nut from backing off, depending on the type of spindle you have. Lippert easy-lube axles have a hole through them for a cotter pin and castle nut, while Dexter axles won't have the hole for the cotter pin and instead use a regular nut and tang washer to prevent the nut from backing off. It doesn't hurt to hang onto the extra hardware incase you need... view full answer...
Hi Vanessa,
We can definitely get you a 2-bike rack for your 2020 Dodge Challenger, and I'm going to assume you need a hitch to carry the rack as well. If that's true the correct hitch for your '20 Challenger is the Curt Trailer Hitch Receiver # C13236.
Then for a bike rack, my favorite that will work the best for your Challenger is the Hollywood Racks Destination Bike Rack # HLY94FR.
What I really love about the Destination # HLY94FR is the value it gives you; it isn't wildly expensive... view full answer...
Hello Otto. The 12v pin on your 7-way should be hot all the time, assuming it is wired directly to the vehicles battery. This would generally be the 1 o'clock pin. I have included the wiring diagram for a 7-way below for your reference. I am not quite sure what you mean by "tm pin" though so if you can provide more information, I am happy to provide you with a more detailed answer. view full answer...
Hello Jackie. It is possible to use a baking tray in the High Pointe Built-In RV Convection Microwave # HP99ZR, provided the tray itself is microwave safe. A circular rack is preferred. If you have a rectangular rack, you will need to use the included rack and remove the turntable.
That said, this microwave is designed to be used with the turntable. Food may not cook as evenly when using a stationary baking tray. view full answer...
Hey Tom,
The Replacement Fan Motor Assembly Kit for Dometic FanTastic Roof Vent Fans # FVK8017-00 comes with a 1-year manufacturer warranty for manufacturer defects. view full answer...
Hey Mike, so I found some online Keystone manuals that detail how to link to the Bluetooth speakers.
1. Power on each Keystone by pressing their power buttons. You will hear "Power On" for confirmation. *2. The speakers will automatically, wirelessly link for stereo sound. The speakers will search for each other while playing an intermittent tone. Once the stereo pair is success fully linked, you will hear "Pairing successful, connected" followed by "Left channel" and "Right channel" on... view full answer...
Thank you for the image, Jason. It looks like the best option for you is going to be relocating the 7-way to a No-Drill Mount Bracket # 18136. This mounting bracket will clamp around the cross tube and allow you to position the mounting plate included with the 7-Way # ETBC7 higher behind your receiver and much closer to the bottom of your rear fascia. view full answer...
Hey John,
If you have a 2008 Mini Cooper hardtop S-model or 2008 Mini Clubman hardtop then you'll need the Roadmaster # 521877-1. This will work with Aerodynamic Package, but not with Sport suspension.
If you have a 2008 Mini Cooper hardtop base model then you'll need the Roadmaster # 521878-1. This does not fit models with Aerodynamic Package or Sport suspension.
If you haven't picked out the rest of your flat towing setup then I have the following recommendations for you:
Tow Bar:... view full answer...
Hey David,
The Optronics Trailer Clearance or Side Marker Light w/ Reflector # MC32RB comes with a 194 bulb # A194B. The mounting holes are 3" apart from center to center, but with this being a surface mount you can just use on hole and fill in the other hole with some sealant and shoot the screw in making a new hole. view full answer...
Unfortunately Curt, I do not see a date code in the image you sent in. The date code is going to be a 4 digit number with the first 2 numbers referencing the week of the year it was manufactured and the last 2 digits being the last 2 digits of the year. It may only be on one side of the tire. I have included an image of another trailer tire below where you can see the date code(3117) on the far right portion of the tire. view full answer...