There sure are custom fit floor mats from WeatherTech that fit your 2018 Subaru WRX, and I'll go over the options for you.
Front Floor Mats are available in the following colors:
Black: # WT441661
Gray: # WT461661
Tan: # WT451661
Second Row Floor Mats are also available in those colors, though please keep in mind they will not fit in models with optional Audio Package 2 sub-woofer under driver's seat. The Second Row Floor Mat options are:
Black: # WT441662
Gray: # WT461662
Tan: # WT451662
If... view full answer...
I recommend the Yakima Jet Stream kit for your application, based on the shape of the previous bars you had. This kit provides you with aero shaped bars that are very similar to the 2011 Subaru Impreza's factory bars.
This rack installs into the fixed points on your roof, however is not compatible if you have a glass roof on your Subaru.
The kit consists of:
JetStream Crossbars, 50 inches, part # Y00425
SkyLine Towers, part # Y53TR
Landing Pad 11 for Yakima Towers, part # Y00233
This... view full answer...
I do have a hitch pin lock that will work for you but unfortunately a Saris hitch pin lock will most likely not work for your Kuat Transfer, because the lock for the transfer screws into the bike rack not just into the hitch. The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks # HLT is going to be the hitch pin lock that is compatible with your Kuat Transfer bike rack. view full answer...
There is a high-quality option for a roof rack and roof-mounted bike rack for your 2022 Subaru WRX, but I checked with the manufacturers, and there are no trunk-mounted bike racks for your Subaru. So you'll need to go with a roof rack, and starting with the rack, the option that fit is from Thule, and consists of the following parts:
- Thule WingBar Evo Crossbars - Silver # TH711300 or Black # TH711320
- Evo Fixpoint Feet for Thule Evo Crossbars # TH49SC
- Fit Kit # TH88RE
When it comes... view full answer...
The EcoHitch Invisi Trailer Hitch Receiver, part # 306-X7257, has a distance from the center of the hitch pin hole to the outside edge of the receiver of 1-1/8". This is not enough to use the Thule EasyFold XT, part # TH903202, or any other Thule bike rack.
Instead, I recommend using the Kuat NV 2.0 2-Bike Platform Rack, part # BA22B. It can hold two bikes up to 60 pounds each. It is a wheel-mount rack that has keyed-alike locks. I've linked to a video review of this below. view full answer...
Yes, they do. It is the EcoHitch Invisi Trailer Hitch item # 306-X7257. This hitch is custom fit and bolts to the 2021 WRX's frame with included hardware. I really like this hitch because it mounts directly behind your rear bumper and the receiver is accessible through a hidden knockout panel.
The EcoHitch Invisi Trailer Hitch item # 306-X7257 is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
I have attached a couple of pictures... view full answer...
Not only is the size of the trailer hitch receiver important, but also the class is important. The Yakima Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches # Y02445 is only to be used on class 2 receivers so it will not work on your class 1 receiver. This is for a couple reasons, one being that class 1 receivers are not designed to hold the weight of some accessories, such as this class 2 bike rack. The second reason is that some hitch manufacturers actually weld in a stopper which blocks... view full answer...
Yes the Curt Bike Rack part # C18065 will fit and work great in the EcoHitch that fits your 2020 Subaru WRX part # 306-X7257.
There is enough clearance between the hitch pin hole and the back of the hitch/trunk pan for the rack to fit. view full answer...
The crossbars on your new 2018 Subaru WRX should be an AeroBlade Edge kit, like part # TH7062-TH7603. For any future accessories, you'll want to look for those that fit the Thule AeroBlade type bars.
In the case of the Prologue, you're right on in that the XAdapt 9 kit, part # THXADAPT9 is the correct kit to adjust the Prologue to working on the Thule AeroBlade bars. view full answer...
To choose the correct ball mount/hitch ball combo you simply need to measure the height of the top of the inside of your EcoHitch Invisi Trailer Hitch Receiver # 306-X7279 when it is installed on your 2013 Subaru WRX Sedan as well as from the ground to the bottom of your trailer coupler (while it is level!). You then just need a ball mount with a drop if the receiver is higher or a rise if the trailer coupler is higher. The ball mount kit # 989900 is a great option because it comes with... view full answer...
That's a tricky question that would be very difficult to answer. The hitches are designed to fit around a stock exhaust. If your aftermarket exhaust sits exactly where the stock exhaust would, then the # 306-X7257 EcoHitch would fit perfectly for you. However, if the aftermarket exhaust is positioned differently or is larger than the stock exhaust you might have problems getting everything to fit together.
My best advice would be to check out the linked install video, and pay very close... view full answer...
The Glacier Chains Snow Tire Chains # PW1038 are confirmed to fit the 245/40 R18 sized tires on your 2014 Subara STi. These are constructed of wire cross cables with spring rollers wrapped around them so they are considered spring style chains. They're also SAE Class S so they're designed for vehicles with little clearance for tire chains.
For rubber adjusters to make installation easier use # view full answer...
The Thule AirScreen Fairing for Roof Racks part # TH82WV comes with two types of clamps which are for aero and square crossbars therefore, you will not need to buy an adapter in order to install this fairing on a Thule square crossbar.
The padded rubber bumpers on the bottom of the fairing do not have a "protective sticker" but you should have no concerns with them rubbing into the paint as the force applied to the bumpers is minimal.
As long as there is 44" of space between the mounting... view full answer...
The correct fit kit to mount the (discontinued) Thule Rapid Traverse foot pack TH480R to your 2015 Subaru WRX is the discontinued part THKIT1649. Thule has been doing a complete remake of their products and so basically all of their roof rack and bike racks have been changed to a newer style that better accommodates newer vehicles. I reached out to my contact at Thule to see if the newer fit kit will work with the Rapid Traverse foot pack but he said that none of those parts are interchangeable.
Luckily... view full answer...
The Yakima Fat Cat 6 Locking Rooftop Ski and Snowboard Carrier has mounting hardware that will fit all crossbar shapes up to maximum bar dimensions of 3-7/16 wide x 1-3/4-inches tall. This size range accommodates almost all factory and aftermarket roof rack bars. Rhino-Rack Vortex Aero crossbars are 3-1/8 wide x 1-3/16-inches tall so they're a great fit.
For your 2015 Subaru WRX your Vortex rack options are shown on the linked page. All racks fit the sedan with a bare roof. Both silver... view full answer...
I have a similar roof rack that will work for your 2016 Subaru WRX but the Rhino-Rack RS 2500 Roof Rack for Naked Roofs RRRS143 that you referenced won't work.
Instead you'll need to use the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR37GR which fits the Sedan model and will install in the same manner using clips and hug your door jamb. view full answer...
The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 weighs about 30 lbs. The good thing is the weight of the hitch itself does not count towards any weight capacities of your vehicle because it is attached to the frame. I have attached an installation video for your reference.
I recommend the EcoHitch because of it's 2" hitch receiver which is much more versatile when it comes to accessories like bike racks and cargo carriers. There are much more options for bike racks available... view full answer...
Yes, the Kuat Sherpa 2.0 2-Bike Platform Rack # SH22G that you referenced will work perfectly with the EcoHitch Trailer Hitch Receiver # 306-X7257 on your 2018 Subaru WRX. The Sherpa 2.0 features a length of 1-5/8 inches from the center of the hitch pin hole to the end of the shank, well under the max 2-1/2 inches that the EcoHitch will allow with a hitch-mounted accessory.
This is an excellent platform-style carrier that uses ratcheting hooks to firmly grip the front wheels on your bikes... view full answer...
I recommend the EcoHitch Invisi Trailer Hitch Receiver # 306-X7257 for your 2021 Subaru WRX Base. This 2" receiver will hide behind the center knock out panel on your rear fascia. The hidden design ensures your WRX looks clean and you will not have a receiver hanging below your rear fascia.
The Curt Vehicle Wiring Harness # C56259 will give you a 4 way flat connector. This connector will fit with most small trailers you might tow and can also be used with Auxiliary Lights # C53201. These... view full answer...
I don't have a list of every bike rack the EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 which is a fit for a 2016 Subaru WRX will work with unfortunately. That said, the main issue we see with this trailer hitch in regards to bikes rack is a shallow hitch pin hole. The Kuat bike racks don't seem to mind the shallow hitch pin holes like other carriers (Thule etc.) so there should be no issues. view full answer...
Go To Results