You can replace the mounting bracket and hardware on an # FXP10W0301 or # MJ-1200B, but the tube and swivel bracket are not available as replacement parts for these jacks. You can use the Replacement Mounting Kit for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MK for the mounting bracket and Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs # MJ-1000B-MBB for the hardware. You can also replace the inner bearing... view full answer...
We have exactly what you need. It's our part # C17535.
It measures 35-9/16 inches long and is for the 800 pound tongue weight Curt TruTrack part # C17499. view full answer...
The # 391SUOB20T you purchased comes with the Towing Kit w/ Ball Mount and Trailer Wiring # 391CONVOC3. The 2" receiver # 391RR2 is the only option for a receiver, and none of them are rated for towing. You have to use the Stealth Hitches ball mount that came with the hitch if you want to tow.
If you have lost the ball mount, you can replace it with the Ball Mount for Stealth Hitches Hidden Receiver Hitch # 391BMU3S. You will also need a hitch ball with a 1" diameter shank. You can use... view full answer...
You will need the replacement hardware kit, # RHK. Enter in the hitch number and hitch manufacturer where indicated on the page and click add to cart and the correct kit will be assembled. I have also included a link to the installation instructions and a link to a video showing a typical installation.
For wiring you can use # 118467 if your Outback is not a Sport model or # C56111 if it is a Sport model with single exhaust.
For a ball mount, I recommend the etrailer ball mount kit #... view full answer...
We do have replacement straps and hardware for your Thule Hull-A-Port Kayak Carrier # TH834. I'm not sure what hardware you are referencing specifically, so I'll just go ahead and list out the replacement hardware and you can choose precisely what you need:
- Replacement Tie-Down Strap # TH39YY
- Replacement Rope # 853-5466
- Replacement Metal Bracket # 853-5513
- Replacement 3-Wing, Low M6 Hand Knob # 753-0783
- (For crossbars up to 9/16" tall) Replacement M6 x 50 Carriage Bolt #... view full answer...
According to the folks at Yakima, the front clamp is integrated into the rack and isn't removable, with the exception of the front tensioning handle, which is available as part # 8880190. The rear clamp assembly is available as part # 8880208. The assembly includes the tray mount, top pads, bottom aero mount, screw and top fastener. view full answer...
To order the hardware you are missing for the Trailer Hitch Receiver for your 2017 Subaru Outback you need the Replacement Hardware Kit # RHK. On the product page you will be able to input the hitch manufacturer and the item number for the hitch you have. This will ensure you get the correct hardware for your hitch. view full answer...
According to my contact at TowReady the red fuse supplied in their T-One Vehicle Wiring Harness # 118467 for the 2013 Subaru Outback Wagon is a 10-amp mini fuse commonly available at auto parts stores. view full answer...
The easiest replacement would be to replace the 7-way used in the # ETBC7 kit, which is # 37185.
You could use the Curt # C58000 bracket if need be, but I'd recommend going with the Hopkins # HM47210 7-way instead. The # HM48480 you referenced doesn't include a pigtail, so it wouldn't work for you.
If you click the provided link, you can view a video that explains the wire color codes. view full answer...
On your 1999 Thor Tahoe Lite, the axles have 10 inch brake assemblies based on my research. For the cost, I recommend replacing them with the Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35 instead of just getting the brake magnet and shoe replacements as all the components get upgraded for similar cost. If you want to upgrade to the self adjusting assemblies for easier maintenance, I recommend the Electric Trailer Brake Kit - Self-Adjusting -... view full answer...
There is indeed a suitable replacement.
The Fulton 1588S00 was replaced by the # F501115 which we carry. They are sold in a quantity of 2. view full answer...
Thanks for reaching out! For the SkyLine Towers you'll need to use the current Yakima Same Key System Lock Cores which can be found as part # Y07204. Yakima changed their lock core system back in the 90's so all of the current lock cores have an A followed by 3 digits for their core number. These can be interchanged with any of the Yakima products. Anything before that is a specific lock core that was designed to work with that product only. view full answer...
Originally, your Thule 947 Hitching Post bike rack used cradles that had straps built into them. Thule doesn't make those cradles any more, but the Thule # 853-7887 would be the closest replacement, assuming that the bar on your bike rack is 1 inch in diameter. For each bike, you would need two # 853-7887 cradles and two # 852-3006-001 straps. view full answer...
For replacement hardware for your # e98847 you need the Replacement Hardware Kit # RHK. You will need to enter e98847 in the "Hitch Item Number" field and then choose etrailer in the drop down menu under "Manufacturer." I went ahead and included an installation video on a 2015 Outback for your reference. view full answer...
The replacement mounting hardware that you will need for your Thule Cascade cargo box is the EasySnap U-bolt, # 43216. The u-bolts will fit crossbars up to 3-1/4 inches wide. If you have factory crossbars, you will want to measure the width of the crossbars to see if your cargo box will mount directly to your factory crossbars.
If your box doesn't have the EasySnap hardware, then the replacement you will want is # TH04997 for the older style box. view full answer...
The Spare Tire with 5 Spoke Rim for Yakima Rack and Roll Trailer # Y08121 has
wheel dimensions of 16" diameter x 1.85" wide and tire dimensions of 16" diameter x 3.25" wide. This is the tire # Y8880282 you referenced with inner tube # Y8880283.
I believe this is the newer wheel option for the same trailer fit. If you measure your wheel and tire you will be able to determine if it is the correct fit or if you need to replace the wheel as well. For complete replacement you can use the... view full answer...
Yes, you will simply need to order the Replacement Hardware Kit # RHK for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75673 which fits your 2019 Subaru Outback. When you go to the product page for the hardware kit you will need to include the hitch number 75673 to ensure you get the correct hardware for your receiver. view full answer...
We do offer replacement trailer spindles, and all are shown on the linked page. These include agricultural, EZ Lube and standard types.
Your trailer VIN will not tell us which spindles you need but you can select the right one based on your axle's weight rating and measurements of the current spindle. You'll need a digital caliper like to measure precisely.
Note that new spindles should be welded on only by a professional welder who has experience and the correct jigs for installing spindles... view full answer...
The Replacement Yakima Control Tower for Factory-installed Tracks (QTY 1) # Y8890027 is the correct replacement you are seeking. The Landing Pad 1 for Yakima Control Towers - Qty 2 # Y00221 is the correct fit for tracks which looks like what you have. There are other Landing Pads, but this is the correct fit for the Control Towers. view full answer...
Based on your information, I believe you are looking for the Replacement Pin and Clip for Thule Parkway Bike Carriers, Item # 853-5210-02. If this is not it, let me know and I can look for other possibilities. view full answer...