In order to determine if your Impreza has sufficient clearance for the carrier to install and fold up against the rear of the vehicle, you will need to measure the distance between the hitch pin hole and the closest portion of the rear bumper (see photo).
The etrailer Folding Cargo Carrier measures 9-1/2 inches from the hitch pin hole in the shanks to the closest portion of the basket when it is folded. If the measurement you took is less than 5 inches, the carrier will fit just fine... view full answer...
The only trailer hitch options for a 2008 Subaru Impreza Hatchback with single exhaust is the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 and Curt Trailer Hitch Receiver part # C11315. I checked with EcoHitch and the EcoHitch Stealth Trailer Hitch Receiver part # 306-X7261 will not fit models with the single exhaust. view full answer...
The Curt trailer hitch # C11497 will fit the WRX version of the 2004 Subaru Impreza, including STi models. I have included a link to the installation instructions for you to view. To add a ball mount and hitch balls you can use # C45521 with # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch diameter. For trailer wiring use # C59236. I have included a link to the installation instructions for you to view for the wiring as well. view full answer...
For your 2000 Subaru Impreza Sport Wagon we have several bike racks that are confirmed as a fit for this vehicle. If your Impreza does not have a rear spoiler, then I highly recommend the Thule OutWay # TH45JV for a 2 bike carrier or the # TH56BV as a 3 bike carrier.
If your Impreza does have a spoiler, then hatch mounted bike racks are not recommended due to the additional weight that will be exerted on the spoiler. If you do have factory installed spoiler then you will want to use the... view full answer...
We have several hitches available for the 2014 Subaru Impreza sedan, depending on the model.
If you have the WRX or WRX STi models you will want Curt hitch # C11317. If you plan on doing some towing, you will want ball mount # C45521, 2" hitch ball # A-82, 1-7/8" hitch ball # A-80, and wiring harness # 118581. Pin and clip are included.
If you plan to do some light towing you will want ball mount # C45521, 2" hitch ball # A-82, 1-7/8" hitch ball # A-80, and wiring harness # 118581. Pin... view full answer...
The Draw-Tite # 76084 is for later model Subaru Crosstreks and XV Crosstreks but will not fit your Impreza.
The only Draw-Tite hitch receivers we have for your vehicle are Class I like the Draw-Tite # DT24959. I've linked the install video for you. view full answer...
The Yakima FrontLoader # Y02103 will work great on your 2019 Subaru Impreza once you have some crossbars installed on your raised rails.
The Malone SteelTop Roof Rack - Square Crossbars # MPG202 will be compatible but I recommend going with the Malone AirFlow2 # MPG216 instead because it uses aero-style crossbars that not only look better but the aerodynamic shape means they will have less wind noise and drag than the square bars that you were looking at.
Attached are some review videos... view full answer...
Your 2015 Subaru Impreza hatchback with a single exhaust does have a 2 inch hitch available, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211. This is a pricier option, so if you are looking for a budget-friendly rack and hitch combo, you will want to stick with the best 1-1/4 inch hitch, which for your Impreza is the Draw-Tite Trailer Hitch Receiver # DT24959.
This hitch has better ground and bumper clearances than the Curt Hitch # C11286 that also fits your '15 Impreza so you will... view full answer...
Let me begin by saying that the hitches are designed to fit around a stock exhaust, so I can't speak to whether or not your existing aftermarket axle back exhaust would interfere. If the exhaust does interfere, a muffler shop could most likely make things work for you.
For the sedan Impreza model, I'd recommend the Curt Class I hitch, part # C11408. I'll link to an install video, where you can see how the hitch fits in regard to the exhaust, which will give you an idea of if it will fit... view full answer...
Nope, it sure won't; we have a hitch and wiring harness that fits your 2022 Subaru Impreza but nothing from a 2010 Outback will fit. There is only one 2 inch hitch for your Impreza, otherwise you'd need a Class I, 1-1/4 inch hitch, so I'll give you options for both:
- Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11465
OR
- EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7350
- T-Connector Vehicle Wiring Harness # C56367
The Curt hitch has... view full answer...
The part number you gave was for the factory crossbars on your 2019 Subaru Impreza and the answer to your question is yes, the Rhino-Rack J-Style Kayak Carrier - Folding # S512 will absolutely fit those crossbars.
I have added a link to a video review of this carrier for you to take a look at. view full answer...
I would be happy to help you. I looked through our fitguide and found a hitch that will fit your 2009 Subaru WRX Sedan that is not an STi. The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11317 is a confirmed fit for your WRX. This custom fit hitch receiver bolts directly to your frame with included hardware. This is a class I hitch with a 1-1/4" receiver they do not make a 2" receiver for your WRX.
For a compatible bike rack you can't go wrong with the Thule T2 Classic... view full answer...
The hitch pin hole depth of the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 is about 2-1/4" which I went out to our warehouse to check for you so you won't have any issues with the Thule Helium Pro 2 Bike Rack part # TH9042PRO which only requires 1-1/2". I checked the bumper clearance as well and there are no issues here either so the Thule Helium Pro 2 Bike Rack looks to be the perfect bike rack for your 2012 Subaru Impreza using the Draw-Tite Sportframe Trailer Hitch Receiver. view full answer...
The Curt receiver hitch item # C11315 you were looking at will fit your 2011 Subaru Outback Impreza Sport so long as you have the single exhaust. This hitch receiver is custom fit, designed specifically for your vehicle, and requires no welding. It has a 2000 lbs towing capacity and a 200 lbs max tongue weight.
If your Subaru Outback has the quad exhaust, I recommend the Curt receiver hitch item # C11120. This is an equivalent hitch receiver from the same manufacturer it just accommodates... view full answer...
Since the CIPA Deluxe Door Mount Universal Towing Mirror attaches to the bottom of the door and between the window and the car door as shown in the video I linked you to, it should fit your Impreza with no problem.
The door mount is definitely the way to go for stable mirrors with minimal vibration. The mirrors are sold individually, so if you wanted one mirror for each side of the vehicle, you would order two of them. view full answer...
Thanks for the purchase of the Rhino-Rack 2500 Roof Rack DS118B and the Custom DK Fit Kit # DK258. I took a look and according to the instructions, apart from the Subaru Impreza, the Fit Kit is compatible with Kia Venga's and a Subaru WRX/WRX STI sedan from 2014 and up, though there is not an end model year they have listed that will fit.
If you get back to me with a specific model year I would be able to give you a more specific answer on what would or would not work for you. view full answer...
The 17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs # C18145 is able to suppor the weight of your propane tank. The bigger issue is the hitch on your 2012 Subaru Impreza Hatchback. We only have one hitch that is capable of that weight in addition to the cargo carrier weight and that is the EcoHitch # 306-X7211 which has a tongue weight of 525 lbs.
No other hitch will be compatible of carrying that weight as they are all rated for a maximum tongue weight of 200 lbs... view full answer...
When you go to remove the rear fascia on your 2022 Subaru Impreza Hatchback to install the EcoHitch Hidden Trailer Hitch Receiver # 306-X7350, there will be an additional wire connection you need to unclip for the rear sensors in the fascia. You will need to ensure you clip the sensors back in when reassembling the fascia.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56367 when you install the receiver. This will be easier to route the wiring and access all the... view full answer...
Yes! The Yakima ForkLift # Y02098 will fit your 2002 Impreza WRX 5 door that has factory crossbars. ForkLift is the first Yakima fork-mount bike carrier that attaches to a factory, round and square roof-rack crossbars.
The rear hatch of your Subaru Impreza hatchback will open to the maximum without interfering with the Yakima ForkLift roof mounted bike carrier # Y02098.
I have included a FAQ link and installation video for you as well. view full answer...
Go To Results