The EcoHitch # 306-X7261 for your 2011 Subaru Impreza only has a 2 inch option but you can use reducer sleeve # HT02 to use 1-1/4 inch accessories with the 2 inch receiver. The use of a reducer sleeve does not decrease the hitch tongue weight capacity like other adapters would. view full answer...
We do offer custom-fit T-connector trailer wiring harnesses for the Subaru Impreza. All of these can be seen on the link provided. You can use the Select Vehicle Style drop-down menu to select your particular version of the Impreza.
For example, the TowReady harness # 118573 that you referenced fits the hatchback (but not the WRX and WRX STi versions). view full answer...
For the 2016 Subaru Impreza there is one 2-inch hitch offered but it fits only the 5-door wagon single-exhaust variant; for your 4-door sedan only 1-1/4-inch light-duty Class I hitches are offered, as shown on the linked page. Hitch makers match the capacity of their hitches to the host vehicle's own capacity; in the case of the Impreza sedan this means a Class I hitch only.
The hitch I suggest is the Draw-Tite # 24960, rated for 200-lbs of tongue weight. This hitch does not have a support... view full answer...
One of our main hitch suppliers,Draw-Tite, has confirmed a hitch fit for the 2017 Subaru Impreza 5-door wagon, EXCLUDING the WRX STi version that has quad exhausts.
Except for that one version you can use their 1-1/4-inch Class I hitch # DT24959, installation of which is shown in the linked video. The recommended ball mount is # 3593 and with it you could use either 1-7/8-inch ball # 19256 or 2-inch ball # 19258. For a wiring harness you can use # 118573; a helpful article is linked to... view full answer...
The Valterra Rubber Tank Grommet # F02-2106 can fit a variety of floor or wall thicknesses as it's designed to mount to a toilet floor flange that gets mounted to the floor under the toilet. This grommet does not fit directly to the floor or wall. view full answer...
The only hitch receiver available for your 2006 Subaru Impreza Sport Wagon is going to be a Class I with a 1-1/4 inch opening like the Curt Trailer Hitch Receiver, # C11497. The frame on your Impreza is not able to handle the towing capacities of the higher class of hitch so they do not make a 2-inch hitch for your vehicle.
Since it sounds like you already own a bike rack that is designed for a 2-inch hitch you would need an adapter like part # HTAD to be able to use it with the 1-1/4... view full answer...
I spoke with my contact at Curt Manufacturing and he said they would be coming out with a hitch for the 2015 Subaru Impreza WRX. He could not give me an exact date when the hitch would be available, but said most likely within two or three months, depending on when the 2015 is released and available for fitting. Curt is the only manufacturer that is making hitches for the WRX models. view full answer...
We have not yet had the opportunity to test fit your 2018 Subaru Crosstrek Limited and our manufacturers have not tested it either, so I can't confirm a fit at this time
If the information you read about the Crosstrek and Impreza is true, then the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # DT24959 would fit in the same way it fit the 2017 Crosstrek and Impreza.
If you already have this hitch, I recommend using new hardware. You can use the Replacement... view full answer...
Thank you for the photo of your Allen Sports 532 RR Bike Rack!
Most of the time there are specific bolts that fit bike racks, but according to my research it looks like your Allen 532 RR has a hollow shank so you can use the Anti-Rattle Trailer Hitch Receiver Lock # 63232 to not only get rid of the wobble, but to also lock the rack to your vehicle.
This comes with a metal block you insert inside the shank of the rack and then the threaded bolt snugs the block, as well as your bike rack... view full answer...
We have black roof racks for the 2017 Subaru Impreza wagon, for both bare roof and raised side rail variants and you can see all on the linked page. At the top of the page please click on the type of roof set-up you have and then you'll see only the black roof racks for that kind of roof.
You have roof rack options from several makers including Thule and Rhino-Rack and in several bar styles including round, square, rectangular and the quietest type, the wing-like Aero style which generate... view full answer...
The only hitches available for a 2018 Subaru Impreza sedan have 1-1/4" receivers; there is no option for a 2" hitch on the sedan model of '18 Impreza.
The Draw-Tite # 24960 and Curt # C11466 that fit the sedan are each Class I hitches that have a 200 lb tongue weight capacity so if you are using an accessory like a bike rack with either hitch you need to be sure it is Class I rated. view full answer...
None of our hitch manufacturers offer a Class III hitch with a 2 inch receiver for the Impreza. They do offer Class III's for the Forester, Legacy, Outback and Tribeca models, but not for the Impreza.
Furthermore, you're absolutely correct abut the pitfalls of using an adapter with a Class I hitch, which lowers the weight bearing capacity of the hitch by half. The Class I hitches available for your Impreza like the Draw-Tite # 24886 have a tongue weight capacity of 200 lbs. Using an adapter... view full answer...
For the 2012 Subaru Impreza WRX sedan we offer a 1-1/4-inch Class I hitch from Curt, their part # C11317. This light-duty hitch has the capacity to transport up to 2 bikes on a compatible Class I hitch bike rack. No 2-inch hitch receivers are offered for any versions of the 2012 Impreza.
While it is possible to use a hitch adapter like # HTAD to allow installation of a 2-inch hitch bike rack in a 1-1/4-inch hitch, this practice is not recommended. Use of ANY adapter has the unavoidable... view full answer...
Happy Monday to you as well! I do have a potential solution for you. We do not carry a draw bar with a true 0" rise, but what you can do is use the Curt Class 2 Drawbar # C45503. This has a 3/8" rise, and will be the closest thing we have to a 0" rise. You can use it with the 1-7/8" hitch ball # C40001. Keep in mind that with this setup, you are limited to towing 2,000 lbs or less. view full answer...
Yes, when you order the etrailer Trailer Hitch Receiver Lock # e98879 you can select the keyed alike from the dropdown box to get all 4 of the same keys that will work on both locks. This will allow you to use the 1-1/4" Hitch Extension # hes6 and have it secured.
I recommend using the Anti-Rattle # RM-061-125 to eliminate the play with the extender and your hitch mounted accessory. This will help keep it from moving around and making noise while you drive. view full answer...
Of the options we offer for your Forester, I'd recommend the Draw-Tite Class III hitch, # 75650. The hitch crossbar and receiver opening would be fully visible under the rear bumper fascia as shown in the photo I've provided.
The hitches we offer for your 2011 Subaru Forester would mount to the underside of the frame members. We don't offer a hitch that would install behind the bumper fascia and allow the receiver tube to pass through.
If you click the provided link, you can see the hitch... view full answer...
From what I was able to ascertain, the GR indicates that it is 2008 Subaru Impreza WRX STi. If that is the case there are no hitches currently available for the vehicle.
The best option would be to use a trunk mount bike rack. It is actually the more economical choice and they are not permanent installations. According to Thule there are several options. I have listed them below.
Passage 2, # TH910XT
Passage 3, # TH911XT
Gateway 3, # TH9007
Archway 3, # TH9010
If you will be carrying... view full answer...
The only hitches we offer for your 2013 Subaru Impreza are Class I 1-1/4 inch hitches like the part # C11286 which will fit if you have a hatchback with single exhaust.
Class III 2 inch hitches are only used on vehicles with higher capacities like trucks and SUVs.
I attached a page that has all of the hitches we offer for your 2013 Subaru Impreza. view full answer...
The Swagman Trailhead part # S63360 has the larger rise at 3 inches over the # 63120 which has 2 inches.
The Trailhead also has about two inches of straight shank directly out of the hitch opening before starting to angle upward. It's the ground clearance winner for sure. view full answer...
Hey Mark! Thanks for the kind words and business!
The correct Thule Wingbar roof rack for your 2011 Subaru Impreza hatchback that has a totally naked roof would be the # TH711220, # TH460R, and # THKIT3068 that you referenced.
For a roof cargo box the Thule Motion XT part # TH629707 is a really great option for you size vehicle. It has 16 cubic feet of cargo space and has overall dimensions of 77" long x 36" wide x 17" tall which will fit your hatchback roof well and will look great... view full answer...
Go To Results