Yes, the front T-Bolts that come with the Rhino-Rack Road Warrior Rooftop Bike Carrier # RBC036 will fit in the channels of the Yakima RailBar Crossbars # Y00448-0449 that you'll be installing on your 2019 Subaru Impreza. view full answer...
No problem, I can certainly help you there. On the top right hand corner of our home page, you will see a search box. Simply type in RHK (for "Replacement Hardware Kit") into the search box. Once you are on the RHK product page, simply type in the hitch part number in the provided field and select the hitch manufacturer from the drop down menu. We well set you up with the complete hardware kit for the hitch, which will be compatible with your Impreza Wagon as long as it has the single exhaust.
I... view full answer...
I called my contact at Curt and they told me the symptoms your system has are the converter. Since it is not sold as a separate item, the harness will need to be replaced. The Curt trailer harness with a powered converter is part # C59496. We have had several customers send positive reviews with this harness.
Since you are planning on getting a trailer with brakes there are a couple of additional things you will need. First, you will need a brake controller. I recommend the Prodigy P2,... view full answer...
I would recommend the Draw-Tite Class 1 Round Trailer Hitch, item # DT24959, for your 2008 Subaru Impreza five door Wagon if it has a single exhaust and the Curt # C11315 if it has the quad exhaust. To complete your towing setup you will need wiring, ball mount, pin and clip, and a hitch ball. Both of the hitches available for your vehicle are Class 1 rated and will require some enlargement of access holes to install. so there is no real advantage of one over the other.
We have the wiring... view full answer...
The inline fuse of Curt T-Connector Vehicle Wiring Harness # C56259 that fits your 2012 Subaru Impreza sedan is a 10 amp fuse.
With this - and all other - harnesses I highly recommend using Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector; using it will increase your 4-way's durability and extend its lifespan. view full answer...
I do have a sewer hose storage container that will work with the RhinoEXTREME RV Sewer Hoses part # CAM39867 but the bayonet fittings on the end of this hose are not removable and measure to be 4-1/2" in diameter. Therefore, this hose will not fit inside a sewer hose container with an inner diameter of 4".
For a sewer hose storage container that will work with the above hose, I recommend the Valterra RV Sewer Hose Carrier part # A04-3460BK which has an inner diameter of 4-1/2" . The storage... view full answer...
The Curt Trailer Hitch Receiver part # C11317 is specifically designed for a 2013 Subaru Impreza WRX model or WRX STI models if that is what you have it is a good hitch. I believe what you have is the standard Subaru with the single exhaust in that case the Draw-Tite Sportframe Trailer Hitch Receiver part # DT24959 is a good choice if you want the 1 1/4" receiver tube opening or the EcoHitch Invisi Trailer Hitch Receiver part # 306-X7211 if you would prefer the larger 2" receiver tube opening.
I've... view full answer...
We have a roof basket that allows a bike rack to be installed on it, the Yakima MegaWarrior part # Y07080, but we do not have a way to do the same thing with the Rola part # 59504 that you mentioned. The Yakima HighRoad, part # Y02114 can attach to the front bar of the basket as if it's a front crossbar and the rear attaches to the back of the basket.
You could also take a look at the Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier, part # RRRMCB03.
I attached a picture that shows... view full answer...
There are three versions of the Thule Excursion Roof Box:
677 - Available Jan 1999 - Dec 2004
677TT - Available Jan 2005 - Dec 2008
667ES - Available Jan 2007- Dec 2012
The correct mounting hardware for your Thule Excursion 677TT is the Replacement Quick Mount Hardware Kit, # TH04997. The Replacement EasySnap Mounting hardware which is compatible with the other two versions of this box is now obsolete. I confirmed this with my contact at Thule who also stated the original hardware cannot... view full answer...
The trailer hitch I recommend for your 2020 Subaru Impreza wagon is the Draw Tite part # 76209 as it has a 2 inch opening and the highest capacities of any of the options that fit your vehicle. I attached an install video for this hitch for you to check out as well.
For trailer wiring I then recommend the Tekonsha kit part # 118744 as it installs easily and has a very reliable converter box so it will last a long time.
If you wanted to do some towing you might be interested in etrailer... view full answer...
You won't need a drawbar to carry a bike rack with the Draw-Tite Sportframe Trailer Hitch Receiver # DT24959 installed on your 2018 Subaru Impreza and really unless you have an older or very entry-level bike rack you shouldn't even need the Pin & Clip # PC2 either as the bike rack should come with something to secure it to the trailer hitch.
If you don't already have a bike rack then I actually recommend going with the Class III Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 instead... view full answer...
Yes, I checked with Thule and the Thule OutWay 2 Bike Carrier # TH56BV is a confirmed fit for your 2009 Subaru Outback Wagon.
Check out the installation instructions and review video that I attached for this product for you to also.
If you plan on carrying women's or alternative framed bikes you may also be interested in purchasing a Thule Women's and Alternative Frame Bike Adapter Bar # TH982XT. view full answer...
The Curt Class I Receiver Hitch, # C11286, will fit your 2012 Subaru Impreza Hatchback Premium edition.
If you were planning on using the receiver as a mounting point for a bike rack or cargo carrier, be aware that Curt requires the use of a stabilizing strap like part # 18050.
If you were planning on using the receiver for towing, you might also need the following:
Wiring Harness # C56111 for WRX and STi hatchback models only
Wiring Harness # 118573 for non WRX and WRX STi models
1-7/8... view full answer...
I spoke with my contact at Roadmaster and Base Plate Kit, # 916-1 is the correct base plate kit for your 2003 Subaru Impreza.
The Base Plate Kit, # 1148-1, is the correct kit for your 1998 Toyota 4Runner.
The RoadMaster Falcon 2 Tow Bar, # RM-520, that you mentioned is a good, economical choice with many great features like a quick disconnect system, telescoping arms for easy hookup, and a full length steel cross bar to help support your vehicle frame.
As for a towing kit, I recommend... view full answer...
That one won't but I have one that will. I checked with EcoHitch and the correct hitch for your 2013 Subaru Impreza 2.0i Premium Hatchback is item # 306-X7211. This one fits the 5-door wagons with single exhaust. It is a class III hitch with a 2" receiver.
The EcoHitch item # 306-X7241 you were looking at fits the 2013 sedans.
If you are planning on towing you will also need a wiring harness item # C56368 and a ball mount kit item # C45534. view full answer...
There are actually 2 different methods to installing the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 on your 2016 Subaru Impreza; Version 1 that requires bumper removal, and Version 2 that requires hole enlargement.
You can physically lift the hitch into place, yes, but the hardware is a little different when it comes to the install. If you don't want to enlarge any holes on your trunk pan you'll need to remove your bumper to gain access to the opening in your frame so you can... view full answer...
For your 2018 Subaru Impreza Wagon we have the EcoHitch part # 306-X7350 which is a confirmed fit and is exactly what you are wanting. The reason I recommended it for you is because it has a 2 inch opening and only has the hitch opening hanging down below the rear bumper of the vehicle so it will be as concealed as possible. view full answer...
For your 2010 Subaru Impreza Outback Sport, I recommend the Curt Trailer Hitch, # C11315, that you have referenced. This has been confirmed to fit your vehicle and there are no install notes that require any trimming of the rear fascia. I also checked the linked installation instructions and there is no mention of fascia trimming there as well.
I attached an install video for you to check out as well. view full answer...
The Draw-Tite trailer hitch receiver, part # DT24959, is confirmed to fit your 2015 Subaru Impreza 4-door hatchback. We call your vehicle a 5-door on our site.
I've linked the video of when we installed the hitch on a Subaru like yours. view full answer...
Tongue weight represents the maximum amount of downward force that can be safely suspended from the hitch, whether it be tongue load applied from a trailer coupler, or a hitch mounted accessory like a bike rack or a cargo carrying tray like the # PS1040100 you looked at. In the case of your hitch, the weight of the cargo carrier plus whatever is loaded on it could not exceed 200 lbs. view full answer...
Go To Results