Bike racks that are suitable for use on the rear of a trailer or motor home must be built specially to withstand the additional stresses found at the back of such long vehicles. The further from the rear axle the back of the trailer or motor home is the more the lateral and vertical forces that will be applied to the rack. Bike carriers designed for use on automobiles, such as the Thule EasyFold 2 Bike Rack # TH903202, are not suitable for use on a motor home, but we do have solutions for... view full answer...
The 2006 Monaco Diplomat 40 PDQ Class A Motor Home that you have will use the Roadmaster chassis. You will need to determine which Roadmaster chassis is used on your motor home to choose the correct RSSA steering stabilzer and brackets.
The Roadmaster Reflex Steering Stabilizer with Mounting Brackets, part # RM-RBK8-RSSA, that you have referenced will fit the 2000 to 2009 Roadmaster Motorhome Class A with straight axle, leaf springs, and 1-1/4 inch, 1-1/2 inch, or 1-3/4 inch tie rod.
The... view full answer...
To add a Yakima roof rack to your 2023 Honda CR-V with flush rails you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR
SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
A great perk... view full answer...
The blue domed bushings in the Roadmaster Rear Anti-Sway Bar kit # RM-1139-145 are shown in the linked photo. Dimensions are indicated for you. Please note that the bushings and hardware for this sway bar are offered on their own as kit # RM-4139-127. view full answer...
We have three wheel liners that sound like what you may have on your Monaco. You'll need to make sure they fit the rims you have before purchasing.
# NA226H40N for 22-1/2 by 6-3/4 inch rims
# NA227H40 for 22-1/2 by 7-1/2 inch rims. Direct fit on Accuride wheels 29028.
# NA228H40N for 22-1/2 by 8-1/4 inch rims. Direct fit on Accuride wheels 28484.
All three models are 8 lug, hub-piloted liners with 4 hand holes.
To measure your the width of your wheels you need to measure from bead... view full answer...
The Curt Echo Wireless Brake Controller # C51180 will technically work with any vehicle that has a 7-Way with the trailer light and 12V power functions active. The reason why we don't list it as compatible with your 2007 Roadmaster Monaco Dynasty is because using a wireless brake controller with a Class A motorhome isn't going to produce consistent results. The Echo will technically work once the settings are established, but when you're on the road we can't guarantee the manual override... view full answer...
We've checked with Kwikee in the past and based on your gear box number of 151320 that indicates the components of your step are no longer available due to age. So what you'd need to do is go with the current version of the Series 38 which is part # LC3823383 for a step replacement. view full answer...
I have a solution that could help, but there are no aftermarket sway bars available for your 1997 Roadmaster Monaco. I spoke to my contact at Roadmaster and he recommended the Roadmaster Steering Stabilizer part # RM-RBK6-RSSA.
The sturdy steel spring on this stabilizer keeps your vehicle in line by constantly working to maintain its position. Mount it between the steering mechanism and the chassis for a tight connection that will minimize wander and correct oversteering.
You should have... view full answer...
The Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 6-Pole Round - Center Pin 12V Power # HM47083 should be what you are looking for.
I've included a Help Article with additional information on trailer connectors as well should you have additional questions. view full answer...
As long as your Holiday Rambler doesn't have the Dana Spicer front axle, the # RM-RBK6-RSSA you'd looked at would be a fit. If you have the straight leaf spring axle, you'd use # RM-RBK8-RSSA. view full answer...
Yes, there is enough room under the covers for your Dometic Penguin II AC's to install the pair of SoftStartRV Soft Starts # SSR44FR. The main unit comes with a good length of wiring so it does not have to mount where your current electrical components mount and can mount where there is more room. view full answer...
The wires on your new taillights should be labeled. If they are not labeled then all you need to do is apply 12 volt power to each wire to see which function it activates. Then for the motorhome you will need to use a circuit tester and test each of the wires for the taillights while they are active. That will then let you know which wire goes where (red to red or white to black).
The reason you must test is because one light/motorhome manufacturer can use a red wire for the stop/turn... view full answer...
I was unable to find any motorhome called a Newmar Knight, but there is a 2006 Moncao Knight on a Roadmaster chassis, which is I believe you were referring to.
If so, we do carry the correct Roadmaster Steering Stabilizer, which is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motorhomes # RM-RBK6-RSSA.
I have added a link to a video review of the stabilizer for you to check out as well. view full answer...
I am sorry but we do not sell replacement slideout fabrics in that size unless you have the Solera RV Slide-Out Awning - 163" Wide - White item # LCV000163301. In which case the replacement fabric would be item # LC49VR.
If you have any other slide out awning you would need to contact your local RV dealer. Most of them offer a universal option or can point you in the direction of finding a dealer or service center that does. view full answer...
Since your trailer has a 7,000 pound GVWR there's a good chance it's equipped with two 3,500 pound axles. If this is the case then you can replace your existing hubs with the etrailer.com # AKHD-545-35-K. This hub and drum assembly uses the # L68149 inner bearing (1.378" inner diameter) and # L44649 outer bearing (1.063" inner diameter) that's commonly used on 3,500 pound axles.
You can verify fitment onto your current spindles by either checking for the numbers stamped inside the existing... view full answer...
If your RV steps look like the # LC3722616 this would be what you'd need since it is automatic opening and closing with a door switch and is 24 inches wide. This is just the steps and motor and would you allow you to use what you have now in terms of switches and controller. Or if you need an all new kit the part # LC372261 comes with everything needed. view full answer...
For your 2003 Sun Valley RoadRunner travel trailer, the #10 torflex axle will use lift kit # K71-707-01 if your axle is rated for 2,300 to 4,000 lbs. If you have a #9 Torflex axle with 2,000 lb capacity then you will want # K71-723-01. We also tandem axle kits like # K71-707-02
If you have the Torflex #11 axle rated for 4,100 to 6000 lbs, we have the tandem axle kit # K71-724-02. If you have the Torflex #12 axle rated for 5,500 to 7,000 lbs, then we have tandem axle kit # K71-725-02.... view full answer...
You are correct that the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System # LC82FR is replacement for your power gear 500731 keypad in your 2004 Holiday Rambler Sceptor per my contact Lippert.
Unfortunately I do not have a picture of the product to show you at this time. view full answer...
I don't have any information on what other front axle might have been used on the Roadmaster chassis. I would say that there are others out there without the Dana Spicer front axle or it wouldn't be called out like this. I saw the review on our site from 2012 so I reached out to my contact at Roadmaster to clarify.
According to their tech notes the # RM-RBK6-RSSA and their other stabilizers will not work with the Dana Spicer. I'm not sure if that information was old and updated since... view full answer...
Go To Results