I have an option for you, but there is not a custom fit Gooseneck Hitch that is confirmed to fit your 2015 Ram 5500.
I recommend using the Curt Gooseneck Flat Plate # C65500. This plate is universal and it's normally placed on top of the flat bed, above the rear axle. You'll need to drill holes through the plate, truck bed and into the truck frame. The manufacturer recommends using (grade 5) 1/2 inch hardware to install the plate.
Note that underbed reinforcement is required to reach... view full answer...
There isn't a hitch fit specifically for any cab and chassis, including the 2023 Ram 5500, but there is a possible option. The only thing your customer could do is have a metal worker fabricate a metal plate, bracing and gussets (or if the cab and chassis has a flat bed) and install the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500 to mount the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3050. view full answer...
If you have the space then I recommend the Ultra-Fab Steel Jumbo Roller for Trailers and RVs # UF48-979023. These rollers have an all steel construction and grease zerk fitting to allow you to easily lubricate the roller. I've attached a diagram below displaying the dimensions so you can determine if your trailer has enough height clearance for these rollers. view full answer...
The Beacon Light Mount for Buyers Products Kabgard Headache Rack part # 33785142 bracket measures 2.33" wide so you will have no issues mounting it to a 2" square tube. view full answer...
I reached out to my contact at Carr and they assured me that the Carr LD Custom Fit Side Steps # CARR117441 will fit on your 2018 Ram 5500 Flat Bed Diesel truck. We do not have an installation video of this product available but they assured me that these are a universal product and will mount anywhere on the frame, near the door, that you can fit them. You will need to drill holes into the frame of your truck in order to mount these steps, since there are no pre-drilled holes on the frames... view full answer...
We have air bag style suspension enhancement that fits your 2019 Ram 5500 with the part # F2404 which will work really well to provide additional support to the factory suspension as needed since you can adjust the air pressure in the bags to increase or decrease support. That said, we don't offer an air suspension system replacement to convert the vehicles to air ride if that's what you were referencing.
Then for the 2019 3500 Ram we have the Air Lift kit part # AL88231 as a confirmed... view full answer...
The Lippert Center Point Air Suspension Upgrade you referenced, part # LC1565391 is compatible with tandem axles up to an 8K capacity, according to Lippert, so the system will work great with your 8K Lippert axles.
I've linked to a video where one of our install crew explains how the air suspension works, as well as to a video showing a typical installation. view full answer...
While there are a couple option for a gooseneck hitch that can work for your 2022 Ram 5500 cab and chassis, the Curt gooseneck is a custom fit for the pick-ups, and there isn't a way it can be made to fit the cab and chassis.
Depending on your Ram's configuration, there are a couple of things you can do, which is add a hitch for a flatbed, or add a hitch plate that gets welded or bolted on.
- B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500
- Buyers... view full answer...
For your 2015 Ram 5500 I recommend the Edge Juice with Attitude CS2 # EP31407 which is confirmed to fit if your Ram 5500 has the 6.7L Cummins. There are actually several Edge tuners that fit your truck. I've attached a link.
The Mileage Coach is great feature because you can view several different parameters that will provide you an indication of your driving habits. You can also monitor real-time gas usage.
Regarding the warranty: While the answer is straightforward from a legal standpoint,... view full answer...
The best gooseneck hitch for your 2024 Ram 5500 cab and chassis is the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 which is designed for fabrication applications.
This then allows you to use either the standard B&W Companion # BWRVK3500 or the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch # BWRVK3050 depending on if you'll have a standard bed or a flatbed on your Ram. view full answer...
The T-One Vehicle Wiring Harness # 118384 would not be compatible with the Tekonsha Brake controller you mentioned. The 118384 is a 4 flat wiring harness for trailer brake lights, tail lights and turn signals. So it does not include any kind of brake function.
You would need to have a 7-way plug installed on your vehicle in order to use a brake controller. If you have a 7 way plug installed from the factory your can use part # 7894 to wire in your brake controller. view full answer...
Thank you for the photo, and while there is a 2-1/2 inch trailer hitch receiver that fits your 2021 Ram 5500 cab & chassis, I checked with the manufacturer, and the TorkLift hitch you mentioned will not fit. So for a 2-1/2 inch hitch, you will need to go with a Curt hitch:
- Curt Trailer Hitch Receiver # C15800
This is a Class V hitch that has a massive 2,700 lbs tongue weight capacity and 20,000 lbs towing capacity. I have added a link below to the instructions as well as a video install... view full answer...
We have 2 different 2-1/2" hitch receiver options for your 2024 Ram 5500 Cab and Chassis and the correct one just depends on what you're looking to get out of the hitch.
The Curt # C15800 is your classic hitch receiver while the TorkLift # TL49YR is a dual stacked receiver that gives you both a 2" and a 2-1/2" receiver.
I recommend going with the Curt unless you're going to be towing a trailer and needing to carry a bike rack, or use an in-bed camper and need a special hitch extender... view full answer...
I confirmed with Timbren that the # TDR5500 is indeed the correct suspension enhancement spring for your 2015 Ram 5500 Cab and Chassis. The contents of the kit are designed for the stop over the axle as seen in the attached diagram. This kit includes 2 aeon rubber springs. The # TDR5500 can be installed whether you vehicle was equipped with or without factory top overload springs.
What it sounds like you are describing is the upper overload springs. The Torklift # TLA7200 is a good... view full answer...
You'll need to hardwire the Prodigy P3, which means the correct adapter is the Replacement Brake Control Harness # 20127.
If you do not have a factory brake controller on your Ram you will not need to have it flashed; if you are replacing the factory brake controller there is a good chance you will (this is not a one size fits all answer which is why I can't give you a definitive yes). view full answer...
The B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3050 only fits into the mating B&W Gooseneck hitch installation kit # BWGNRK1500. Your photo appears to show a different product.
If you can find a B&W part number on your setup that will allow me to check further with B&W.
I did measure the part # BWGNRK1500 for you since it is in stock. From the top of the plate to the center of the pin hole is 2-inches; from the top of the plate to the bottom of the shank... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks # BWGNRK1500 can be welded into your 12' bed on your 2012 Dodge Ram 5500. This universal style gooseneck ball will allow you to have the ball placed where you need it on your bed. This will ensure that you have the necessary trailer clearance for turning. The Turnoverball can be easily flipped inside the hitch for storage and will not interfere with using your bed when needed.
You will be able to use other hitches... view full answer...
We do have a Class V trailer hitch receiver that will fit the frame rails of your 2009 Bluebird bus, although they are all weld-on applications as there isn't an option for a heavy-duty hitch that is bolt-on. The options are either a 3" drop or a 7" drop:
- 3" Drop: Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15901
- 7" Drop: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V # 41990-07
I have added links to the installation instructions of... view full answer...
If you got the error code because you unplugged the factory controller and plugged the P2 # 90885 in its place then you can have a dealership turn off the code. They have to basically change something in the computer to tell the truck that it does not have the factory controller. It isn't the PowerNet wiring but that does complicate things some times.
Otherwise as long as the truck has a fully functioning 7-Way trailer connector you can use the Prodigy RF # TK94FR. view full answer...
Go To Results