To utilize the Titan Chain Sliding Lashing Winch for Flatbed Truck or Trailer # TCLR900 you need the following:
- Brophy Winch Bar for 2" Lashing Winch # W2BZ
- etrailer Sliding Winch Track # e48ZR view full answer...
Sure, you can weld the low-profile Titan Chain Lashing Winch for Flatbed Truck or Trailer # TCLR860 to the bottom of your flatbed truck. The only difference between this winch and the "bottom mount" Titan Chain Lashing Winch for Flatbed Truck or Trailer # TCLR850 is that the "bottom mount" on the latter is an extra inch taller. So if you are sure you can reliably access the low-profile # TCLR860 winch it can be mounted on the bottom.
This winch will need a strap and can use the 4" x 30'... view full answer...
Yes, for the tightening bar that works with the Titan Chain Sliding Lashing Winch for Flatbed Truck or Trailer # TCLR906 you just need the part # TCLRWBS-B. view full answer...
I recommend the Buyers Products 4" Standard Bolt-On Trailer Winch # 3371903020 for your trailer. This has the same mounting bracket as the Titan Chain Lashing Winch # TCLR965 you found. The Buyers winch has 2-1/2" of space between the frame and the spool for the strap. This will allow you to wrap up a Kinedyne Tie-Down Strap # 4821XW-27F and leave it rolled up on the winch. view full answer...
The Brophy Stake Pocket Tie-Down Winch # T2WZ is not available from Brophy as a base only option. While they do have a Replacement Lashing Winch # W2CZ they do not have the base as a individual part for purchase. view full answer...
The Titan Chain Lashing Winch for Flatbed Truck or Trailer - Bottom Mount - Bolt On - 5,500 lbs # TCLR955 can absolutely be used on gooseneck flatbeds. You just can't have a load behind the gooseneck ball when pulling your trailer unless it is far lower than the trailer so you don't have turning clearance issues. view full answer...
The Titan Chain Sliding Lashing Winch for Flatbed Truck or Trailer - 6,000 lbs # TCLR912 will work with straps like the Titan Chain Strap for Truck and Trailer Winch - Flat Hook - 4" x 30' - 5,400 lbs - Blue # TCLR430-1-33. This strap is what is recommended for use on this particular winch, but it has not been tested and there is not a shorter length available that will ensure accommodation when rolled up on the spindle.
I've attached the link to all your options for length. They range... view full answer...