Expert Answers about Ram 2500

• Availability of Replacement Parts for Curt 5th Wheel Hitch for 2018 Ram 2500
• Yes we do! For your newly acquired Curt A25 5th Wheel Trailer Hitch # C16046 we have the Replacement Legs # C16021, Head # C16580, and Hardware # C16125-SK4 all readily available if the need were to arise. We also have replacement parts available for older model Curt hitches because we know the importance of keeping these on hand so that our customers can continue to use their hitch for years on end. I have attached a link that will take you to our complete selection of Curt replacement...
  view full answer...


• Is There an Add-On Part to Make Manual Brakes Self-Adjusting?
• To get the self adjusting brakes, you would need to get the Dexter # 23-468-469. This is a set of right and left hand brakes and will match your current brakes. Unfortunately, there is not a part that can be added to manual adjusting brakes that will make them self adjusting.
  view full answer...


• Replacement 2-1/2 Inch Shank with More Drop for Equal-i-zer Weight Distribution System
• The Equal-i-zer Weight Distribution Shank # EQ90-02-4900 features a maximum drop of 6 inches so it should work perfectly to keep everything level with your new Ram. The 2-1/2 inch shank is indeed compatible with your existing Equal-i-zer system and will hook right up to the head just like your existing shank. I have attached a short video review that you can check out as well.
  view full answer...


• 270 Awning Attached to Truck Camper Shell
• It will be no problem to attach a 270-degree awning like the Rhino-Rack "BatWing" # RR33100 for driver's side or # RR33200 for passenger side. This awning attaches to roof cross bars with channels. In this case, a good choice for cross bars would be the Rhino-Rack # Y02-480B Aero Bar Roof Rack for Camper Shells. I think you will like having tracks that can be adjusted for varying uses. Otherwise you can use your Yakima bars if they have a top track on them. Many of our Rhino-Rack customers...
  view full answer...


• What is the Correct Replacement Drop Leg for My RAM 8000 Series Trailer Jack
• I do have a possible option for you but the Replacement Drop Leg for etrailer and Ram Square Direct Weld Jacks - 3K # TJD-5000-FT only has a capacity of 3,000 lbs so that wouldn't be enough for your dump trailer. The possible option I have is the Replacement Drop Leg with Foot for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs # TJD-7000-FT. This replacement drop leg has a capacity of 7,000 lbs so it will be much closer to your dump trailer's capacity. You will need to take a...
  view full answer...


• Which Replacement Mounting Hardware for Westin HDX Nerf Bars with Drop Steps on 2019 Ram 2500
• You are correct. In order to mount the Westin HDX Nerf Bars with Drop Steps # 56-13565 you would want to use the Replacement Mounting Hardware Kit # 56-135PK. These will allow you to mount these steps on a 2019 Ram 2500 Tradesman model.
  view full answer...


• Is There Replacement Hardware for a B&W Turnover Ball Gooseneck Hitch GNRK1313 2012 Ram 2500
• The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1313 contains the mounting hardware and brackets for the Hitch # BWGNRK1313. It does not contain the Center Section # BWGNRC900 or Safety Chain U-Bolts # BW1900-2-1600. This is the only way we carry the hardware for your hitch.
  view full answer...


• Is Manual Override Plug Available For LCL Powered Jack
• Several of the powered trailer jacks we offer have a manual override option. For example, the Bulldog powered camper jack we offer, part # BD500185, has a manual override feature that uses a crank bolt, part # BD500191. The rubber cover is removed and the crank bolt is used with a ratchet to manually operate the jack when power is lost. If the plug that covers the override feature is what you are looking for, we offer a cover that works with Bulldog Powered-Drive camper jacks. That part...
  view full answer...


• Replacement Handle Latch for Pro Series 20K 5th Wheel Trailer Hitch
• I have a complete replacement 5th wheel hitch option for you, but as your 20k Pro Series Hitch has been discontinued for some time, the replacement handle latch which you're looking for which was part number 30416 is no longer available. If you check around there's a small chance that you'll find a new old stock part, but if not a complete replacement hitch is your only option. For a complete replacement I recommend going with the Curt A20 # C16140 which will be quite the upgrade compared...
  view full answer...


• Longer Shocks For Flipped Axle
• You will need to measure the available space between your current mounts. Another option is the Lippert shocks in kit # LC281281. This shock kit has 13-1/2-inch extended length shocks with the axle placed above the spring stack. You can refer to the linked diagram to see the usual placement of the shock. I also linked the written installation instructions. My technical contact at Lippert Components confirmed the axle position should not affect the installation so as long as the length...
  view full answer...


• Correct Replacement 7-Way Trailer Connector Pigtail for Travel Trailer
• The pin-out for a 7-way trailer connector is pretty consistent. Unless the connector was wired incorrectly, it should be wired as shown in the provided photo showing the correct pin-out. What CAN vary is the wire color codes, which are also shown in the photo. The # H20046 pigtail would work just fine for you, just be sure to follow the wire color code shown on the linked product page. I'd also recommend a junction box like part # 3375601100. A junction box provides a centralized place...
  view full answer...


• Aluminum Gearbox Compatible with Landing Gear Set # RVLG-8000
• The Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 does not have a kit that includes the aluminum gearbox. We do however have the gearbox # LC276602 that you can use with this system instead of the composite gearbox that comes with the kit. This is a very easy option to simply swap out the parts when installing to give you the gearbox you desire.
  view full answer...


• Replacement Hub and Drums For PJT Trailer With 008-393-03 Installed
• Thanks for all of the information on your PJT Trailer! Based on your drum part number you have a 12-1/4" Drum that is oil bath. The Dexter # 8-393-4UC3 is almost right, but it is designed for grease and not oil. You will need the # 8-393-4UC3 and oil seal # 10-63 for each hub. This hub does not include the bearings so you will also need new inner bearing # 25580 and outer bearing # 02475 for each hub. If you need replacement brakes now or in the future you will need # 23-428-429 for...
  view full answer...


• Availability of 10 inch Self-Adjusting Brakes
• I have found a set of brake assemblies for your Lippert axle. The etrailer Electric Trailer Brake Kit, # AKEBRK-35-SA, are both left and right brake assemblies. These assemblies are self-adjusting that only require an initial set-up at installation. Once installed, the brakes will self-adjust as part of the assemblies normal operation. The brake assemblies are 10 inches x 2-1/4 inches. I also recommend using # L11465 Wheel Bearing Grease, # L70025 Deluxe Bearing Packer, and, if needed,...
  view full answer...


• Replacement Motor for Lippert Stabilizer Jack on 2011 Keystone Fuzion FZ322
• Your 2011 Keystone Fuzion fz322 rear stabilizer jack is the Lippert # LC298707. The Replacement Electric RV Stabilizer Jack Motor for Lippert Components Landing Gear - Rear # LC352338 is the correct replacement for that system.
  view full answer...


• Correct Drain Replacement for 2016 Ram 2500 with BAKFlip Tonneau
• Yes, since the tonneau cover you have on your 2016 Ram 2500 is a BakFlip the correct drain kit would be the part # PARTS-356A0011.
  view full answer...


• Replacement Tower Cover Needed for Yakima BaseLine Tower
• While we do have replacement parts available for your Yakima BaseLine tower # 8880618, I am not sure exactly what part you are referring to. In order to make sure I suggest the part you need, I will just list all the replacement parts we carry! Here they are: - Replacement Rubber Topper for BaseLine Towers # 8880619 - Replacement Swing Door for BaseLine Towers # 8880621 - Replacement Door Assembly for BaseLine Towers # 8880620 - Replacement Bolt Adjuster for BaseLine Towers # 8880623 Hopefully...
  view full answer...


• Replacement Breakaway Cable for 8K Demco Hydraulic Brake Actuator
• To replace the breakaway cable on your Demco Hydraulic Brake Actuator # DM8759132 we have the following kits: - Replacement 3/32" Safety Cable # DM05408 - Replacement Break Away Cable and Lever # 5401 The first kit is just the cable while the second kit also includes the lever in case that was damaged as well.
  view full answer...


• Replacement Leaf Spring for Reese Round Tube Slider Base
• The leaf spring inside of the Reese Round Tube Slider part # RP50024 is not a replacement part offered by the manufacturer. Therefore, if this is damaged then you will have no other option but to replace the entire slider assembly. That said, if you are looking to save money then we do have a more cost effective option that will work in its place, the Reese Fifth Wheel Slider part # RP30048.
  view full answer...


• Replacement Spotter Mirror for K-Source Custom Flip Out Towing Mirrors Part # KS60184C
• I spoke to my contact at K-Source and they informed me that the replacement spotter mirror for the K-Source Custom Flip Out Towing Mirror part # KS60184C is not available. I wish I had a better option for you but you would want to purchase the entire assembly in order to replace the spotter mirror.
  view full answer...