Expert Answers about Ram 1500

• Install of Front Connections of Demco Air Force One so They Are Protected
• There isn't any type of protective cover for the connections for the front of the Demco Air Force One part # DM26VR. Hopefully you don't end up getting hit or backed into but depending on the vehicle you could mount the connections somewhat recessed like in the picture I attached so that they wouldn't be quite as vulnerable.
  view full answer...


• Recommended SumoSprings for a 2013 Ram 1500
• Yes, SumoSprings would help to address the sagging and squatting you are experiencing in your 2013 Ram 1500. I recommend the SumoSprings Solo Custom Helper Springs item # SSR-307-47. These springs have a 1,500 lbs capacity that will easily handle the tongue weight of your Whitehawk Trailer. These springs work by using progressive load control. The springs compress according to the weight of your cargo. Basically the more weight put on them the more they are engaged. When you are not towing...
  view full answer...


• Recommended Front Mount Hitch for a 2022 Ram 1500 w/out Tow Hooks
• I would be happy to help you. We do have a front mount hitch that fits your 2022 Ram 1500. It is the Draw-Tite Front Mount Trailer Hitch item # 65081. This is confirmed to fit the 2022 Ram 1500's without the tow hooks. If you have tow hooks this will not fit. This front mount hitch has a 500 lbs vertical load limit which is the same thing as tongue weight. If you have the tow hooks or your trailer's tongue weight is heavier, I recommend using the Trailer Valet XL Trailer Dolly item...
  view full answer...


• Custom Towing Mirrors for 2018 Ram 1500 Laramie
• For custom towing mirrors that will fit the chrome power folding mirrors on your 2018 Ram 1500 Laramie we have the K-Source Snap & Zap # KS80710. These snap on over the back of your factory mirror and will not obstruct your puddle lights. They use a flat lens for true representation of object size and will give you the added visibility you need for towing your ultra lite trailer.
  view full answer...


• Recommend Front Mount Hitch for a 2012 Ram 1500
• I have a solution for you but the EcoHitch Hidden Front Mount Trailer Hitch Receiver item # 306-X7900 you were looking at only fits the Ram 2500 and 3500's because of the difference in the frame size on the larger trucks. For a front hitch receiver on your 2012 Ram 1500 there is only one option and it is the Draw-Tite Front Mount Trailer Hitch Receiver item # 65062. The receiver extends below the front bumper.
  view full answer...


• Will Self-Adjusting Electric Trailer Brakes Fit Dexter 3,500 lb Axles
• Yes, you are absolutely correct; the self-adjusting electric trailer brakes for your Dexter 3,500 lb axles are indeed the part number you referenced: - Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA The # AKEBRK-35-SA fit 10" drums, which is exactly what your Dexter 3,500 lb hub will have, so these are going to work for you. The only other thing you'd need for installation is the mounting hardware, the Mounting Hardware for...
  view full answer...


• Similar Bike Rack to Thule T2 Pro XTR that Can be Used with Bike with Fenders
• There isn't a good way to use the Thule T2 Pro XTR # TH83JV with bikes with fenders aside from taking them off everytime which is something you mentioned not wanting to do. The best solution is going to be a new rack that grabs the bikes by the frame instead like the Thule EasyFold XT part # TH903202 which was designed heavier e-bikes that typically have fenders. This even has a ramp that pulls out to make loading and unloading a bit easier as well.
  view full answer...


• Can My B&W Companion From My Short Bed Truck W/ OEM Pucks Be Used On A Long Bed Truck W/ OEM Pucks?
• Yes, you can still use the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package # BWRVK3370 that's in your 2017 Ford F-250 with your new 2022 Ford F-350 long bed. The purpose of a sliding hitch is to allow the hitch to slide back, giving you the necessary clearance when making 90° turns in your short bed truck. With your new truck being a long bed, you can still use this hitch you will just leave it in the tow position as it is unlikely you'll run into a clearance...
  view full answer...


• Is Crossbar of BlackHawk 2 All Terrain Tow Bar Needed for Direct-Connect Kit on a 2019 Ram 1500
• If you have the Roadmaster Direct-Connect Base Plate Kit # RM-522203-5 installed on your 2019 Ram 1500 then you won't need to use the crossbar that comes with the Roadmaster BlackHawk 2 All Terrain # RM-422 (see attached photo we took of this same setup on a Jeep). You can either store it in the event that you end up using a Roadmaster base plate kit that requires it in the future, or sell it to help offset the cost of a flat towing setup. For a complete flat towing setup you will need...
  view full answer...


• Quick-Install Custom 5th Wheel Rail Kit for 2018 Ram 1500
• Yes, the Reese Quick-Install Custom 5th Wheel Installation Kit # RP50142-58 is a confirmed fit for your 2018 Ram 1500. This base rail kit fits all Ram 1500 bed lengths with or without the EcoDiesel engine option. This rail kit will accept any brand of industry-standard 5th wheel hitch, such as your Reese 20K slider # RP30084. If you also need an in-bed 5th wheel wiring harness you can use part # 50-97-410 which offers easy plug-in installation at your existing bumper-mounted 7-way connector.
  view full answer...


• Matching Shank With 2 Inch Receiver for Reese Titan Weight Distribution System
• The best shank for the Reese Titan Weight Distribution # RP66006 to fit in a 2" receiver is the Reese Weight Distribution Shank # RP54998 because it is the shank with the highest capacity at 16,000 lbs which is the closest you can get to matching the Titan's 17,000 lb capacity. I've added a link to a video review of this shank for you to check out.
  view full answer...


• Tailgate Seal For a 2018 Ram 1500 4X4
• To find the right seal for your 2018 Ram 1500 Harvest edition you will need to measure the gap between your tailgate and truck bed. The TruXedo Universal Tailgate TruxSeal # TX1703206 is 10' long and 1-1/4" wide. As this is a universal part it will fit most truck tailgates. We do also have the Extang MaxSeal Tailgate Seal # EX1140 that is also 10' long but is slightly wider at 1-3/8". Again as this is a universal part you will want to choose the seal that will best match your gap.
  view full answer...


• Correct Shock Absorbers for 2021 Jayco Eagle HT with Shock Prep
• The correct shocks for a 2021 Jayco Eagle HT with shock prep is the Replacement Dexter Bolt-On Shock Kit part # K71-697-00. You'll need one kit per axle.
  view full answer...


• Seat Adapter Needed For The Roadmaster BrakeMaster Braking System In A 2014 RAM 1500
• Yes, the correct seat adapter for the Roadmaster BrakeMaster Braking System for RVs w/ Air or Air Over Hydraulic Brakes # RM-9100 in your 2014 Ram 1500 Crew Laramie 4x4 is the RoadMaster BrakeMaster Custom Seat Adapter Item # RM-88272.
  view full answer...


• Could B and W Gooseneck for 2014 Ram 1500 Fit with Air Bag Suspension Enhancement
• The B and Gooseneck Hitch part # BWGNRK1309 is a fit for your 2014 Ram 1500 6-1/2 foot bed. When determining if it will fit with air bags you would have to check with the air bag manufacturer or get me the info on it. They are usually who determine if their kits work with in-bed hitches and not the other way around.
  view full answer...


• Recommended Rear Suspension Enhancement for a 2020 Ram 1500 Rebel
• The Timbren Rear Suspension Enhancement System # TDRTT1500 will definitely give you good support when towing, but they will also affect your ride when not towing due to how much stiffer they are than the stock jounces. This is why I usually recommend an air bag system, like the Air Lift LoadLifter 5000 # AL57375 as they are completely adjustable. However, if you are not preferable to air bags, the Timbren # TDRTT1500 will be the most heavy duty option we have for your truck.
  view full answer...


• MagnaFlow Cat-Back Exhaust for V6 and V8 Ram Trucks
• The MagnaFlow Turndown Cat-Back Exhaust System - Stainless Steel - Off-Road - Gas # MF17108 is a confirmed fit for the 3.6L V6, the 4.7L V8, the 5.7L V8 HEMI. The truck in our video wasn't the HEMI, but it wasn't the V6 either. It was the 2013 Ram 1500 4.7L V8 4x4.
  view full answer...


• Can Air Lift WirelessONE Compressor System be Used With Existing Air System?
• I reached out to Air Lift to ask if the Air Lift WirelessONE Compressor System # AL25980 could be used with an existing system on your 2016 Ram 1500 and they told me that it would not be compatible with another system.
  view full answer...


• Aftermarket Brake Controller Compatibility for a 2015 Ram 1500
• If you do not have a factory brake controller, then you do not need to take the truck to a Dodge dealer. To install an aftermarket brake controller, you just need a brake controller that is compatible the 2015 Ram trucks like the Tekonsha Prodigy P3, # 90195, the P2, # 90885, or the Primus IQ, # TK90160, and the correct brake controller wiring adapter like part # 3024-P for Tekonsha brake controllers. The factory brake controller port is under the dash to the right of the steering column...
  view full answer...