What is happening is that your winch is drawing too much and is causing the ignition to stop working on your 2007 Polaris UTV. Typically this is caused by faulty wiring, but since yours is brand new the problem is most likely that you have a bad battery that can't handle the load the winch puts on the system.
If you rev up the engine while using the winch and it seems to work then the problem would be the battery. view full answer...
The signals to send power to your brakes through your brake pedal and through the manual override on your Tekonsha P3 # 90195 are completely separate so it sounds like there is an issue stemming from either the trailer wiring or brake assemblies.
Start by making sure your brake assemblies are properly adjusted. Use a tool like # W80630 (as shown in the "Trailer Brakes and Wiring Installation" video below) to turn the star wheel until the drum tight enough that it is barely able to be turned... view full answer...
Go To Results