The Brophy Trailer Stake Pocket Spare Tire Carrier - Black Powder Coat # SPTC is not a fit for the 2019 Polaris Ranger XP 1000 because it doesn't have the standard stake pockets that are 2 inches by 4 inches. Instead it uses round holes for stake pockets so it may work to instead use the Fulton Hi-Mount Spare Tire Carrier - Fits 4-, 5-, and 6-Lug Wheels # FHDSTC0101 which gives you a round post if you cut the bracket off that is 1-15/16 inches diameter. This can be cut to fit over a pipe... view full answer...
For your 2015 Polaris Ranger 900, we will need the 2015 Polaris Ranger Bulldog Winch Custom-Fit Steel Winch Mount, # BDW15174. This custom mount will work with the Bulldog Winch Snowplow Winch - ATVs and UTVs - Polyester Strap - 600 lbs, # BDW15021, you asked about. view full answer...
I spoke to Superwinch and they informed me that the correct winch plate you would need for your 2014 Polaris Ranger 900 Crew is the part # 2202919. view full answer...
Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA181420 will fit your 2018 Polaris Ranger 570 just fine. Attached is a review video of this kit on a 2015 Polaris Ranger for you to check out. view full answer...
The Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You can use any winch tray such as the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches part # BDW20061R2 so long as you are okay with drilling. view full answer...
The Superwinch ATV Winch Mount SW2202919 is indeed the correct kit for your 2016 Polaris Ranger 900XP. This winch mount is compatible with all of the Terra Series winches, including the Terra 3500 # SW1135220 and the Terra 3500 SR # SW1135230 AND the Terra 4500 # SW1145220. I confirmed compatibility with my contact at Superwinch. The kit includes mounting brackets, hardware, and instructions to ensure easy installation. view full answer...
For your 2018 Polaris 570 Sportsman the winch mount you want is the Bulldog part # BDW15165. This will work with your Terra winch as well. view full answer...
This is a really good question. So when a vehicle is being flat towed on the highway you'll notice that the vehicle tracks from side to side when as the steering corrects itself and then over corrects itself. It almost looks like someone is in the vehicle and just ever so slightly turning from left to right. This then ends up putting extra strain on a bike rack that is installed in the hitch as that creates additional stress that's not normally on the rack.
So the Kuat Piston Pro part... view full answer...
As long as your 2015 Polaris Ranger isn't the XP or HD model, we do indeed offer seat covers from Classic Accessories, # 052963783773 in black. view full answer...
The Classic Accessories ATV-UTV Seat Cover Set for the Polaris Ranger that you referenced, part # 052963783773, is a confirmed fit for your 2013 Polaris Ranger 500 as long as it is not the XP or HD model. This washable black fabric/pvc cover set includes two seat covers and two headrest covers. view full answer...
My Classic Accessories representative tells me that the # CA18026 you referred to is indeed a fit for your 2015 Polaris Ranger 900XP. view full answer...
I would recommend a larger lift and as long of a ramp as you can. Since your Polaris Slingshot SL is 150 ish inches long so these ramps # RR-TR-11-2 are your best option! These ramps are 136-7/8 inches long and have the highest lift so you don't have to worry about you bottoming out. It seems like your Aluma 8218 doesn't sit too high so the 11" lift will get you right up there. You can put the ramps under the trailer and tilt it back a little bit since there is a little lip for your trailer... view full answer...
I checked with Bull Dog and you can use winch mount # BDW15182 on your 2015 Polaris RZR 900. This winch mount is compatible with Superwinch ATV winch # SW1130220. I have included a link to a video review of the mount kit for you. view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
Yes, we do offer a winch mount that has been confirmed to fit your 2014 Polaris Ranger 570 that would work great with the Superwinch LT3000ATV Winch # SW1130220 that you referenced.
You would want the part # SW1130220 as this has been confirmed to fit your UTV. view full answer...
The Roadmaster Hy-Power Diode # RM-790 is sealed so it would be alright to use in an outdoor setting. You wouldn't want to submerge it underwater but it would work just fine if it got some rain or snow on it. view full answer...
I reached out to my tech contact at Go Power and he said you won't need an additional inverter or transfer switch based on your current system. Having 6000 Watts already available won't require you to have an additional transfer switch or inverter.
The Go Power Solar Extreme Charging System - 510 Watts # 34282185 has the inverter included which you don't need. My recommendation is the Go Power Solar Flex Kit w/ Digital Controller - 550 Watts - 28.4 Amp # 34275012. This kit will give... view full answer...