I have a great tire chain solution for your ATV. Unfortunately, the Titan Chain Snow Tire Chains w/ Cams - Ladder Pattern - V-Bar Link # TC2816CAM will not fit your 26x8x12 ATV tires.
However, for a great alternative that will fit, I recommend the Titan Chain Snow Tire Chains - Ladder Pattern - V-Bar Link # TCATV3-4. These chains have the same V-bar studs as the # TC2816CAM for excellent traction in deep snow and ice. To make installation and tightening easier, I recommend the tensioners... view full answer...
I spoke to Superwinch and they informed me that the correct winch plate you would need for your 2014 Polaris Ranger 900 Crew is the part # 2202919. view full answer...
The Diamond LED Light Bulb Load-Resistors # DI34ZR would be considered weather resistant. You wouldn't want to submerge them under water but they are designed to be mounted on trailer wiring or vehicle wiring in areas that can get wet from rainfall. view full answer...
If you don't have a roof on your Polaris Ranger I suggest using the Malone Rack Pads # MPG314 to wrap around your roll cage. Then get the load extender # Y01149 to hold up the rear of the kayak. IF you do have a roof I suggest getting something like these saddle style carrier # RR581 and drill a hole in your roof and put the T-Slot through the hole and tighten it down. view full answer...
I spoke to the tech at Bulldog Winch and the Bulldog Winch Powersports Series ATV Winch part # BDW15001 power unit 18" wire and 6' wire can be switched but you would need to open up the power unit box and actually switch the wires in the circuits and not just wire them switched. Bulldog has had a lot of issues where customers have switched the wires and burned out the relays and wiring inside the power unit.
The 2 relays can be replaced with part # BDW20101 but the wiring will most likely... view full answer...
Yes the etrailer ATV Winch - Synthetic Rope - Hawse Fairlead - 5,000 lbs # e98989 will work on a 2018 Polaris Sportsman. It includes mounting plate and hardware.
It has a hand held operator switch.
This unit is great for 500cc - 850cc UTVs, ROVs, or MOHUVs. view full answer...
For a winch mount that has been confirmed as a fit for your 2006 Polaris Ranger 500 4x4 you'd want the part # BDW15111 which is a confirmed custom fit. view full answer...
Bulldog has the mount part # BDW15159 which is a fit for your 2004 Polaris Sportsman 700 4x4 and would work great with the Superwinch Terra Winch.
The Bulldog winch plate part # BDW15159 is also a fit for your Polaris and would work well with the Terra winch but I'd recommend the Superwinch mount for use with your winch since the brands match. Bulldog Winch and Superwinch make their winches to fit the same industry standard winch mounts. view full answer...
For your 2018 Polaris 570 Sportsman the winch mount you want is the Bulldog part # BDW15165. This will work with your Terra winch as well. view full answer...
For your 2015 Polaris Ranger 900 crew cab we have the Classic Accessories UTV Seat Cover # 052963783773 that you referenced as a confirmed fit in the color black, but we do not have any other colors. This does fit your seat style though. view full answer...
Yes it will! I can confirm that the correct Bulldog Winch mount for your 1999 Polaris Sportsman 500 ATV is in fact the one you mentioned, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15102. view full answer...
The Superwinch X3 Series Winches use a rather uncommon mounting pattern of two holes spaced 3.69" apart. Therefore, you'll likely haver to drill through the mounting plate in order to secure it. You can use any winch tray such as the Bulldog Winch ATV Winch Mounting Plate for 2" Hitches part # BDW20061R2 so long as you are okay with drilling. view full answer...
Yes, the Classic Accessories Quick-Fit UTV Bench Seat Cover # CA18026 that you referenced has been carried over as a fit for your 2018 Polaris 900 Ranger.
We also have a camo version of this with part # CA181420 as well. view full answer...
I spoke with my contact at Superwinch and he said the Superwinch ATV Winch Custom Mounting Kit, part # BDW15157 will bolt below the bumper on your 2005 Polaris 500 HO. If your brush guard is located above the bumper then it will not interfere with the winch mounting kit.
I have a coworker here who has a Polaris 500 HO with a brush guard and he said that he has a winch on the front of his and it does not interfere with the brush guard. view full answer...
The circuit breaker on the Bulldog Powered Jack kit part # BD1824200100 will trip if over 25 amps is drawn. Depending on the load it would draw around 24 amps at max. view full answer...
The carry handle included on the ComeUp DV-6s Off-Road Winch # CU854754 and the similar model # CU854768 can be removed from the winches.
The handle bolts on to a vertical bracket. This is hard to see in our photos but my contact at ComeUp kindly provided a detail photo of this feature that I linked for you. view full answer...
I went to the warehouse and measured the Bulldog Winch Custom-Fit Steel Winch Mount, part # BDW15151.
The mount measures 8-inches tall, 6-1/4 inches wide, and 5 inches deep. The mounting holes on the bottom bracket are 2-3/4 inches center to center. The mounting holes for the upper bracket measure 2-1/2 inches center to center.
I have attached a couple photos with the dimensions you can check out. view full answer...
The Bulldog Winch Mount part # BDW15151 is a fit for your 2015 Polaris 325 Sportsman ETX.
This would work well with the part # SW1130220 or the # SW1125220.
That being said Bulldog Winch has told me that their winch mounts work just fine with Superwinch winches. view full answer...
I spoke with my contact and he said that ATV Winch Mount, # BDW15157, can be used to mount the Champion model winch that you purchased. Most after market winch companies duplicated Superwinch's mounting design therefore you should have no trouble at all using this Superwinch custom fit mounting kit. view full answer...