The BAK tonneau covers for your 2021 Nissan Titan XD, such as the BAK Industries BAK Revolver X2 # BAK39524, require the Utili-Track rails to be rotated 180 degrees before tonneau installation; the BAK covers do not allow for use of the Titan Box system which you have on your truck.
Since you have the OEM cargo box, I recommend going with TruXedo Sentry Hard Tonneau Cover - Roll Up # TX1588801. This is a roll-up hard cover, very similar to the BAK Revolver X2 that you were looking at. view full answer...
We have a solution that will tick all the boxes in your wish list.
If you install a # BWGNRK1208-5W B&W Turnover Ball Gooseneck hitch in the bed of your Titan, the hitch can be used as the attachment point for the excellent B&W # BWRVK3500-5W Companion 5th wheel hitch. This hitch is made in the USA (in Kansas, to be exact), has a limited lifetime warranty and when removed it will leave your truck bed 100% usable without obstruction.
I've linked to product videos that you might find helpful. view full answer...
To lower your pin box height there are a couple options. First, I recommend adjusting your pin box to the position closest to your trailer if it isn't already. Next I recommend adjusting your 5th wheel hitch to its lowest position. Finally, you can change out your Reese Adapter which isn't a fit for you 2018 Nissan Titan XD for the Demco adapter # DM6200 which is a fit. This adapter will sit 2 inches above the bed of your truck which will be 1 inch shorter than the Reese # RP30156.
Those... view full answer...
I am not 100% sure what you are referring to in regards to the factory 5 wires, but your 2017 Nissan Titan has a factory trailer brake controller port and will use an adapter to plug in to your Tekonsha Prodigy P2 # 90885.
You will need the Plug-In Wiring Adapter # 3050-P to plug into the factory connector underneath the dash.
This connector is there whether you have the factory tow package or not, just if you do not have the factory tow package you will also need the # N40975.
I included... view full answer...
Rhino Rack has a confirmed roof rack solution for your 2017 Nissan Titan XD but they do not offer replacement fit kits for the older style of rack you currently have.
Instead you would need to go with the part numbers # RRVA150S-2, # RRRLKVA, and # DK468 which is a confirmed fit. view full answer...
For your 2018 Nissan Titan XD I recommend the Air Lift LoadLifter 5000 part # AL88229 which is a custom fit for your truck because it can provide up to 5,000 lbs of suspension support and it has internal jounce bumpers as well for added support.
For a compressor kit the Air Lift Load Controller part # AL25592 is what I recommend because it comes with a gauge that you mount on the inside of your truck interior which allows you to easily monitor, inflate, and deflate the bags as needed. view full answer...
For your 2018 Nissan Titan XD that is equipped with the factory gooseneck I highly recommend the Curt A20 5th Wheel Trailer Hitch # C16540-16026 for a few reasons.
This particular hitch features an interlocking 2-jaw locking system that will provide a secure connection to the trailer while also reducing movement and rattle during travel. Its fully articulating torsion head allows for an extremely smooth ride and the 3-Point indicator system is a unique feature that eases hookup by using... view full answer...
The Curt X5 5th-Wheel Base Rail Adapter Plate for EZr Double Lock Gooseneck Trailer Hitch # C16220 will not work on your 2017 Nissan Titan XD. Currently the only adapter compatible with your truck is the Demco 5th Wheel Rail Adapter # DM6200. This will allow you to use any standard sliding hitch for short bed, or fixed hitch for the 8 foot bed. Your capacity will be 21K maximum when using this rail adapter based on the adapter but the truck capacity will further limit that to 17.7K.
Your... view full answer...
It sounds like you have a 2018 Titan XD with a underbed gooseneck trailer hitch installed, and you would like to attach a 5th-wheel slider hitch, like the Curt A16.
The Curt A16, that you referenced, needs to attach to a rail kit (not a gooseball) whose underbed connections are likely already used by your gooseball underbed mounts.
The only fit I see for your Titan XD is the Demco # DM8550034 (rated 18,000 pounds) which needs the Demco # DM6200 rail kit. These hitches come in 16,000,... view full answer...
The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1217 that you referenced is confirmed to fit and will work perfectly on your 2016 Nissan Titan XD. Its custom frame brackets will use existing holes in the truck's frame rails so you don't have to drill into them during installation and it features a towing weight capacity of 30,000 pounds.
A great thing about the Turnoverball Hitch it also serves as mounting rails for the B&W Companion Slider 5th Wheel Hitch # BWRVK3400 if... view full answer...
I may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs.
The Low Profile LED RV Tail Light # RVSTLB61 for the driver's side and # RVSTLB60 for the passenger's side might work for you. view full answer...
The best roof rack option for your 2017 Nissan Titan XD Crew Cab is the Rhino-Rack, which is made up of parts # RRVA150B-2, # RRRLKVA, and # DK468.
This rack will not damage your Nissan's paint when you want to remove it. The crossbars are aero shaped to minimize wind noise, and give your truck a sleek look.
To carry your kayak and paddle board I recommend the Thule DockGrip Kayak and Stand-Up Paddleboard Carrier w/ Tie Downs # TH895.
This can carry a single kayak or SUP, has a weight... view full answer...
Yes, the Demco 5th Wheel Rail Adapter # DM6200 along with the Demco Hijacker Autoslide 5th Wheel Hitch # DM8550034 will work perfectly on your 2019 Nissan Titan XD short bed that is equipped with the factory rail kit. The adapter will drop right into the factory pucks on the truck bed to provide the needed rails compatible with the Hijacker.
This is an excellent setup for your Nissan Titan XD and the Hijacker's automatic slider will give you the needed cab clearance during sharper turns.... view full answer...
The B and W Gooseneck Hitch part # BWGNRK1217 that you referenced does fit the long and short bed versions of the 2017 Nissan Titan XD so this would fit and work well for you. view full answer...
We have a great solution for a fifth wheel hitch to fit your 2016 Nissan Titan XD that has the factory gooseneck hitc, but the High Rise part # 9480 that you mentioned would not work for you as it only fits a select few aftermarket hitches.
Instead you'd want the fifth wheel adapter part # DM6200 which attaches to your gooseneck hitch and allows you to use a Demco sliding hitch like the part # DM8550034 which will slide automatically as you make tight turns.
Since you have a short bed... view full answer...
In the 19 foot length awning option we have only a powered awning with the Solera 12V XL Power Awning part # LCV000335007-362241 which has a fade from white to black. We don't have an option that is solid white. view full answer...
Yes you could install the MaxxFan Plus Roof Vent w/ 12V Fan # MA00-04500K in your truck camper shell that has a carpeted headliner. view full answer...
We actually don't carry either of the adapters you mentioned currently. We used to carry the Andersen Ultimate you mentioned but stopped allegedly because of issues people had with it. What I would recommend for your 2017 Nissasn Titan XD short bed with factory gooseneck is a Demco Hijacker auto slide fifth wheel hitch part # DM8550034 as it will slide back as you make tight turns to give you short bed truck the turning clearance it needs. Unlike other slider hitches this one does not need... view full answer...
The Equal-i-zer Weight Distribution System # EQ37100ET that you referenced is actually a great choice for towing your 1985 Lance camper with your 2018 Nissan Titan XD. It features a 4-point sway control that will definitely improve the sway feeling that you get when getting passed by semi trucks or other larger vehicles as well as help improve any squat that you may have in your towing setup.
This system comes with a 2-5/16" hitch ball so the only other thing you need for the installation... view full answer...
Maximum towing capacity for the Demco 5th Wheel Rail Adapter # DM6200 is 21k and since pin weight is typically 20 percent of total trailer weight that means this has a pin weight capacity of 4,200 lbs. view full answer...