The only class V trailer hitch available for a 2019 Nissan Titan XD is the Curt Trailer Hitch Receiver part # C15306 which installs beneath the factory trailer hitch. The factory trailer hitch actually cannot be removed as it is crucial to the support/structure of the vehicle therefore this is your only option. view full answer...
For your application I recommend using the Demco 5th Wheel Rail Adapter # DM6200 along with the 21K Hijacker Autoslide # DM8550035./ The rail adapter fits directly to the OEM puck system on your 2021 Nissan Titan XD and will allow you to safely tow.
The note on the Hijacker page that talks about gooseneck adapters sounds like what you're referring to. This note is accurate but your situation is an exception to this rule because most adapters like this only secure to the bed using the single... view full answer...
Yes. I was able to confirm with my contact over at Curt that the Curt A16 5th Wheel Trailer Hitch for Nissan Titan XD Towing Prep Package - Dual Jaw - 16,000 lbs # C16520-16026 will also fit in the 2021 Nissan Titan XD OEM prep package. This unit has all of the parts needed to mount the hitch in your Titan XD without additional adapters.
With that said, you may need a sliding hitch in order to tow a 5th wheel trailer with a short bed truck and this hitch may not be the best solution. If... view full answer...
If your hitch has the three point Titan XD base then it's only going to work with a Titan XD, but you can most likely replace the base with either an OEM or standard base to get it to fit your new truck.
For example, if you had the Curt A20 5th Wheel Trailer Hitch for Nissan Titan XD Towing Prep Package - Dual Jaw - 20,000lbs # C16540-16026 you could swap the base with part # C16906 to connect it to base rails in the bed of your new truck.
If your new truck has a puck system you could... view full answer...
We can get your 2018 Nissan Titan XD with a 6-1/2 foot bed set up to tow a 5th wheel trailer, and for your truck, there is just one option that will allow you to do that, from B&W:
- B&W Companion 5th Wheel Trailer Hitch with Slider # BWRVK3400-5W
- Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1217-5W
Just because it's the only option for your truck doesn't make it a bad choice; in fact it's the exact opposite. The Companion is considered by many... view full answer...
It sounds like you are wanting to use the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5GX1216 on your 2017 Nissan Titan XD with the factory prep package but are aware of the issues using the Reese Elite Series Pop-In Ball Kit part # RP30137. If that is the case then I would use the B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan part # BWGNXA2061 instead as the release is not built into the top of the hitch ball which is what causes issues with the above... view full answer...
Yes, the TorkLift Camper Tie-Downs will fit your 2020 Nissan Titan XD Crew Cab as long as you don't have boards or steps running underneath the truck bed. You will need # TLN2410 for the front and # TLN3404 for the rear. view full answer...
The Gen-Y anti-rattle device you mentioned part # GY88XR does have a reputation as fitting really tightly. Some people report that using a hammer works for them, but I personally wouldn't want to mess with all of that. A U-bolt style anti-rattle like the part # RSCP would be an easier option that would be just as effective. view full answer...
The reason the Curt OEM 5th Wheel Hitch Legs for Nissan Titan XD Towing Prep Package # C16026 say they are intended for long bed trucks is because they are fixed legs instead of a slider. What this comes down to is turning clearance. Any bed length under 8' either needs a sliding hitch or a rotating pin box to allow for the needed clearance when making turns at slow speeds. You having a rotating pin box solves that issue for you.
There is one other thing you will need to pay attention... view full answer...
Because the Thule Insta-Gater Pro Truck Bed Single Bike Rack # TH93VR rack drops into the tailgate opening of your 2018 Nissan Titan XD and secures when tailgate closes, using two of these is a feasible option for you.
It's important to point out that the Insta-Gater does have a 50 lb weight limit which may potentially work if you remove the batter of your e-bikes. We don't have any other truck bed racks that have a higher capacity and are compatible with your Utili-track system.
The... view full answer...
The Timbren Front Suspension Enhancement System like part # TFXF1004A should be in constant contact with the front end. If you have a gap from your leveling kit then you will want to use the Timbren 1/2" Spacer for Raised Frame Vehicles
part # TA25722-90P00 that you asked about. It is likely you will need them or the larger Timbren 1" Spacer For Raised Vehicles part # A25723-90AH00 to make up the difference. view full answer...
The MOR/Ryde orbital pin box will work well with the Demco Premier Series Double Pivot 5th Wheel Trailer Hitch - Single Jaw - Above Bed - 16K # DM6076P-16K and Adapter Rail # DM6200. You'll just need to add the Custom Sidewinder Wedge # MR22VR to keep the king pin from rotating inside the hitch head.
I also recommend the wiring harness # C56000 to add a second 7-way to the bed of your Nissan for easy connection and a clean look. view full answer...
Yes, you can safely use the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter w/ Offset # CAB-C5GX1216 on your 2017 Nissan Titan XD with a B&W Ball and Safety Chain Kit # BWGNXA2061 as it uses the handle to lock the ball in place. This will not become damaged like the Reese or Curt ball will with its integrated lock built into the head of the gooseneck ball. view full answer...
The Hi-Rise Gooseneck-to-5th-Wheel Trailer Hitch Adapter # 9480 comes with the square adapter to give you compatibility with the B&W gooseneck # BWGNRK1217 in your 2018 Nissan Titan XD. If you wish to use another style of 5th wheel hitch, you can alternatively use the Curt X5 5th Wheel Base Rails Adapter for B&W Turnoverball # 16310 which will give you industry standard rails compatible with most 5th wheel hitches. view full answer...
The Curt A20 # C16540-16026 is designed to fit in the gooseneck system that comes on the 2017 Nissan Titan XD, but because you have a short bed truck you may need a sliding hitch if you don't have a pin box with a rotating turret.
Instead, I recommend using the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw # DM8550035 with the Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package # DM6200. The Hijacker Autoslide is a great choice... view full answer...
Yes, the RetraxPRO XR Hard Tonneau Cover # RTT-80752 that you referenced is a confirmed fit for your 2018 Nissan Titan XD 6-1/2 foot bed with the Utili-Track system and Titan boxes. We have confirmed this with our contact at Retrax. view full answer...
Yes you can use the Timbren Suspension Enhancement on your 2017 Nissan Titan XD with a 6 inch lift. I would go with four additional 1" spacers on each side, so a total of eight. What you will need is the following:
- Timbren Suspension Enhancement System # TNRTTNA
- Timbren 1" Spacer # TA25723-90AD00 view full answer...
The Andersen Ultimate Connection, part # AM3200 connects to the 2016 Nissan Titan XD with industry standard fifth wheel rails. In order to put industry standard rails in the Titan XD an adapter is required.
If your 2016 Nissan Titan XD has a OEM integrated gooseneck then you need Demco 5th wheel rail adapter part # DM6200. The adapter drops into the puck system, locks into place and gives you 5th wheel rails in the bed to use the Andersen.
If your 2016 Nissan Titan XD does not have an... view full answer...
I did some research on the fifth wheel adapter from Nissan for your 2016 Titan XD.
I found out that when the adapter is inserted in the puck system in the bed of the Titan, it will give you base rails that can work with any industry standard fifth wheel hitch. The B&W Patriot 5th Wheel Trailer Hitch, part # BWRVK3200 will work with these rails, but I recommend using a slider fifth wheel hitch.
I recommend the B&W Patriot 5th Wheel Trailer Hitch w/ Slider, part # BWRVK3270. This will... view full answer...
Yes, you can replace the 2-1/2 inch shank on your 20K Blue Ox SwayPro weight distribution system with a 2 inch shank so you don't have to get a completely new hitch. The correct shank, which does have a 20,000 lb towing/2,000 lb tongue weight capacity, is the following:
- Blue Ox SwayPro Weight Distribution Shank for 2" Hitches # BXW4000 view full answer...
Go To Results