bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Mitsubishi Outlander


  • Roof Rack for 2017 Mitsubishi Outlander to Mount Thule Hullavator
  • There are roof racks for both of your cars that will work with the Thule Hullavator # TH898, but both of your Mitsubishi's will require their own roof rack. The reason for that is they require different parts to install so you can either get a separate rack for both vehicles, or choose the one vehicle you use the most and put the rack on that car. I'll list the racks that fit both cars for you. - 2017 Mitsubishi Outlander (with Naked Roof): Rhino-Rack Vortex Aero Crossbars # RRVA137B-2,...
    view full answer...

  • Does The Rhino-Rack Antenna Mounting Bracket Fit On The Thule WingBar Evo Crossbars
  • Yes, the Antenna Mounting Bracket for Rhino Rack-Crossbars and Platforms # RR43196 will fit into the channels of the Thule WingBar Evo Crossbars # TH711200. This antenna mounting bracket is meant to fit most crossbars with top channels, along with Rhino-Rack Pioneer platforms.
    view full answer...

  • Option For Vent Over Refrigerator on RV
  • While we do not have skylight domes, we do have an option for a refrigerator vent. I say option because there are no specific fits for vents, and it's not possible to know which vent is on any particular RV, so you'll have to measure your opening. If your refrigerator vent has a 24" long x 5-1/4" wide opening you can use the following: - Camco RV Refrigerator Vent # CAM42164 Then the cover for this vent if you need one is the Camco RV Refrigerator Vent Cover # CAM42163.
    view full answer...

  • Fixed Mount Aero Bar Roof Rack for 2015 Mitsubishi Outlander with Flush Roof Rails
  • Your photo shows that your 2015 Outlander has the roof setup with flush rails. We do not have a Rola roof rack for this application but we do that others that will work great. For weight capacity, appearance and value I really like the Rhino-Rack SRB Vortex Aero system made of parts # RRVA126B-2 and # RRSX031. This black aerodynamic rack has a 165-lb capacity on your Outlander and provides quieter performance than all other bar shapes. Please check out the linked video to see more. The...
    view full answer...

  • Is the Curt Trailer Hitch Receiver a Fit for a 2023 Mitsubishi Outlander SE AWD
  • The Curt Trailer Hitch Receiver part # C87WR is a confirmed fit for a 2023 Mitsubishi Outlander SE AWD. This is an excellent bolt-on option that provides you with a class III capacity and 2" opening which is good for use with bike racks and cargo carriers or towing if needed. It features a simple bolt-on install. Please note, if you are towing you'll also need a few other items like the T-One Vehicle Wiring Harness part # TK46VR and Curt Towing Starter Kit part # C45534.
    view full answer...

  • Will Yakima RocketBox Pro 14 Roof Mount Cargo Box, # Y07192 Fit a 2010 Mitsubishi Outlander
  • The Yakima RocketBox Pro 14, # Y07192, will fit the Thule bars on your 2010 Mitsubishi Outlander, as you have mentioned, and the width of the box should be compatible as well. You mentioned that distance between the side rails at the back of the vehicle is 39 inches. The RocketBox is 33 inches wide, so it will just fit (the mounting locations are actually further in so there is more space than it would seem). In terms of the box interfering with the rear antenna there are a couple of...
    view full answer...

  • Does Curt Trailer Hitch For 2022 Mitsubishi Outlander Have Enough Tongue Weight For 4-Bike Rack
  • Yes, you will absolutely be able to carry a 4-bike rack on your 2022 Mitsubishi Outlander with the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver # C87WR The 525 lb tongue weight of the # C87WR is enough to handle any 4-bike rack and its bikes, even the ones that weigh the most and have the most capacity. For example, the heaviest you can get is the 291-1/2 lb total (91-1/2 lbs for the rack and 50 lbs per-bike) of the Hollywood Racks Sport Rider...
    view full answer...

  • Does EcoHitch Trailer Hitch Fit for 2018 Mitsubishi Outlander PHEV Model
  • It will! You do have the correct fit for your 2018 Mitsubishi Outlander PHEV from EcoHitch: - EcoHitch Stealth Trailer Hitch Receiver # 306-X7379
    view full answer...

  • Availability of a Trailer Hitch for a 2017 Mitsubishi Outlander SEL and Outlander Sport SEL
  • The Curt Class III Trailer Hitch, # C13079, is a confirmed fit the 2017 Mitsubishi Outlander Sport including the SEL trim package. If your vehicle is not the Sport model Outlander, then the confirmed hitch will be the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163. This hitch will fit all models of the Mitsubishi Outlander non-Sport including the SEL.
    view full answer...

  • Will the Draw-Tite Hitch # DT97GR Fit My 2022 Mitsubishi Outlander?
  • I have a great hitch that will fit your 2022 Mitsubishi Outlander. Unfortunately, I confirmed with Draw-Tite that the Draw-Tite Max-Frame Trailer Hitch # DT97GR will not fit your vehicle. However, we do carry a great alternative that will fit: the Curt Trailer Hitch Receiver # C87WR. The Curt hitch will provide you with the same 525 pound maximum tongue capacity and the 3,500 pounds of gross trailer weight capacity as the Draw-Tite. You also receive the benefit of the Curt hitch being produced...
    view full answer...

  • Trailer Hitch and Wiring For a 2023 Mitsubishi Outlander PHEV
  • We do have a hitch and 4-way wiring to fit your 2023 Mitsubishi Outlander PHEV. The Curt Trailer Hitch Receiver # C86FV will fit your PHEV version of the Outlander and provide you with a 2" trailer hitch receiver. You can then use the T-One Vehicle Wiring Harness # TK46VR to provide the 4 way plug. The etrailer Ball Mount Kit # 989900 can be added to round out a tow package.
    view full answer...

  • Does Thule Th898 Hullavator Kayak Carrier Fit Other Square Crossbars Than Thule
  • The Thule # TH898 Hullavator fits square bars from Thule, SportRack, Rhino Rack, Inno, and Malone among others. I've yet to come across a square bar that it won't fit.
    view full answer...

  • Using Thule Passage Trunk Bike Rack on 2017 Mitsubishi Outlander
  • Yes! The Thule Passage 2 Bike Carrier # TH910XT is a confirmed fit for your 2017 Mitsubishi Outlander. It can carry two bikes that weigh no more than 35 lbs per bike. This bike rack uses a FitDial, and the correct FitDial setting for your 2017 Mitsubishi Outlander is 10.
    view full answer...

  • Parts Needed to Tow a Trailer with a 2010 Mitsubishi Outlander
  • If you haven't already check the owner's manual of your 2010 Mitsubishi Outlander and make sure you have the towing capacity to handle a 2,200 pound trailer. From my research the 2.4L Outlander has a maximum towing capacity of 1,500 pounds and that's if the trailer has brakes. If you find you can indeed tow the trailer the best trailer hitch receiver for your Outlander is the Curt # 13581. It is custom made for your vehicle and bolts right onto the frame. The wiring harness I recommend...
    view full answer...

  • Will a Womans Bike Fit the Thule Trailer Hitch Mount Bike Rack
  • With most, if not all, 2-arm bike racks a woman's bike would not be able to be carried level which can affect the center of gravity and ground clearance between the bike and the road. And a step-through style frame would not fit. But there is a solution to use a hanging bike rack like # TH9024XT and women's bikes. You can use a bike adapter bar, # TH982XT. This bar clamps around the handlebar gooseneck and the seat post to provide an artificial top tube allowing you to carry the bikes...
    view full answer...

  • Adding Curt Friction Sway Control Bar to Curt Weight Distribution Hitch
  • The Curt Friction Sway Control for Weight Distribution Systems # 17200 may be affected by a longer shank, though you'd need to take a measurement to find out. The sway bar's attachment ball must be centered 24" straight back from the center of the coupler; if you take that measurement and there is still enough room for you to mount the attachment ball you will be find to use the friction sway control bar.
    view full answer...

  • 2012 Mitsubishi Outlander 4-Flat Connector
  • There is a wiring harness available for your 2012 Mitsubishi Outlander so long as the vehicle has the factory tow package. If so, you want to get the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56102. I've added links to a video review for you to take a look at.
    view full answer...

  • Recommended Hitch and Bike Rack for 2018 Mitsubishi Outlander SE
  • I can confirm that the Curt # C13163 is a confirmed fit on your 2018 Mitsubishi Outlander SE (all models except the PHEV) and as long as you're using a bike rack that is designed to fit in a 2" hitch there won't be any modifications/adjustments that would need to be done on the hitch. If for some reason there was something wrong with the hitch then, yes, you would be able to return it without issue. We do not carry the Allen Sports rack you mentioned, and it would fit on this hitch, but...
    view full answer...

  • Roof Rack and SUP Carrier Recommendations for 2013 Mitsubishi Outlander with Raised Side Rails
  • The Malone SteelTop roof rack that you referenced, part # MPG201, is indeed a correct fit for your 2013 Mitsubishi Outlander with raised side rails. With this square bar rack in place you can use a paddle board carrier like the highly-rated Rhino-Rack # RRRWP03 that is shown in the linked video. If you want 2-board capability you might consider the Lockrack Adjustable XL Watersport Carrier # LR54FR. All options can be seen on the link provided. Its always a good idea to check your vehicle...
    view full answer...

  • Will Rightline Roof Mount Cargo Bag Fit a 2012 Mitsubishi Outlander with Side Rails
  • The Rightline Gear Sport 3 Rooftop Cargo Bag, # RL100S30, is designed to fit on vehicles with or without any type of roof rack so it will work on your 2012 Mitsubishi Outlander. The bag measures 38 inches by 34 inches by 16 inches giving you 12 cubic feet of storage space so it will fit nicely on the roof of your Outlander. I also recommend protective pad # RL100650 to help protect the roof and keep the bag from sliding. Another useful item is wheel step # HE4040 which makes it easier...
    view full answer...