The trailer hitch I recommend for your 2005 Tribute is the etrailer, part # e56AR. This is a Class lll hitch and it has a 2 inch receiver opening. I recommend going with a Class lll hitch because it gives you a lot more versatility when you want to carry any accessories or when towing. You can use Class l or ll accessories in the Class lll hitch but if you install a Class ll hitch like part # 36501 you will be limited to Class l or ll items.
If you plan on doing some towing you might... view full answer...
The proper mounting hardware can be ordered for the Draw-Tite Class II Trailer Hitch, item # 36501, by using item # RHK, replacement hardware kit, in the search box and then entering the hitch item number and the hitch manufacturer in the boxes below the item description. I have also posted instructions for installation of this hitch below. view full answer...
From customers we've learned that the fuse slot number 1 is the one associated with activating the factory trailer wiring circuits of your 2005 Mazda Tribute when installing wiring like # 40455. view full answer...
I do have a few solutions to wire your 2000 Viking with 6-way Square to your 2001 Mazda Tribute 4-Way flat.
The first option would be to cut off the 6-way connector on your Viking Popup Camper, and wire in a 4-way connector by function. You will want to use Hopkins Endurance 4-Way Flat Trailer Connector - Trailer End - Ergonomic Design. part # HM48110. To wire, you will want to wire the labeled color wire on part # HM48110 to the matching wires on your trailer.
Another option would be... view full answer...
The Curt # E-3S is meant to install on a full or medium size truck step bumper, and wouldn't work on your Tribute.
We do offer custom designed hitches meant to fit your vehicle, and that's what I'd recommend you use. If your Tribute already has the factory 1-1/4 inch hitch on it, use Curt # C13651. If it does NOT have the factory 1-1/4 inch hitch on it, use # 13650.
If you'll be using the hitch for towing, you'll also need a wiring harness like # 118426, a ball mount like # AMSC2 and... view full answer...
The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts:
- 42" Square Crossbars # INB107
- Feet # INTR
- Fit Kit # INTR103
If you let me know what you plan on using the roof rack for I can make a recommendation for you! view full answer...
I think your best bet would be to make a few short test trips to see how the trailer responds. I would suggest driving a few miles on the interstate as well as surface streets at varying speeds.
If the rear of your Tribute sags once the trailer is attached and trailer sway becomes an issue, then I would choose a system appropriate for fully loaded tongue weight of your trailer.
Once you get your trailer, if it becomes evident that weight distribution or sway control is necessary, get... view full answer...
According to Draw-Tite, their Class III receiver, part # 75751 will indeed fit on a Mazda Tribute equipped with the OE hitch. You should not remove the factory hitch. In fact, they are typically welded in place and would be difficult to remove without damaging the structure of the vehicle.
As you can see in the diagram I provided, the Draw-Tite hitch # 75751 would sit below the factory hitch.
Draw-Tite specifically states that you should NOT use both hitches at the same time. view full answer...
I believe you have Curt trailer hitch 13506. If you need the hardware then you can use replacement hardware kit # RHK. Enter the hitch number on the product page and then choose Curt as the manufacturer.
I will send you a copy of the installation instructions in a separate email. view full answer...
I spoke with my contact at Performance Tool and she informed me that the Performance Tool Wheel Step, part # PT68ZR, has a weight limit of 300 lbs. view full answer...
I hope I can clarify any confusion for you on the T-One wiring harness installation. When installing the Tow Ready T-One Wiring Harness, # 118343, on your 2001 Mazda Tribute the step 3 in the installation instructions is on the passenger side of the vehicle.
On the passenger side you will connect the T-One wiring harness to two points. The top connector (black) is for the running lights and brake signal which is where the T-One connector with the red and brown wire will connect. The middle... view full answer...
A hitch from a 2004 Nissan Xterra would not fit a 2011 Toyota RAV4. For your RAV4 I would recommend you get the Curt Trailer Hitch # C13149. This is a Class III hitch with plenty of capacity. Check out the install video I attached.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,... view full answer...
While I have a much easier trailer wiring solution than the # 40455 that you referenced for your 2006 Mazda Tribute there is a good chance you'd have to have a relay installed behind the dash board of your vehicle to have the circuits active for this kit to work. Since most of our customers have come back and stated that finding the relay was a headache the much better option is to go with a harness that installs by plugging inline with the taillight circuits of the vehicle.
For that I... view full answer...
The Putco # P231920 Driving Light will work absolutely perfectly with your # 30-0025-1155 Safari Light Bar. They were unfortunately not able to provide me with any information about the amperage draw of the light kit. As far as the lamps causing an inadvertent draw on the battery goes, you won't need to worry about that happening as long as the lamps are installed according to the installation instructions. view full answer...
The Thule Outbound Roof Top Cargo Bag, # TH868, is designed to fit between the crossbars that run side to side, and will rest directly on the roof. If your 2002 Mazda Tribute does have crossbars that run side to side, the bag will fit. However, if the space between the crossbars is over the moon roof, then you will not be able to use the moon roof. If your crossbars are the type that can be adjusted, you could try to move them so the bag will not be resting on the moon roof.
You will need... view full answer...
To determine where the problem is first disconnecting the trailer from your 2006 Mazda Tribute. Instead of using the 4-Way tester, use a circuit tester such as # PTW2993. Have someone sit in the vehicle and activate the left turn signal and brakes while you test the 4-Way at the back with the circuit tester.
If the circuit tester shows power when it is supposed to then that indicates a possible issue on the trailer. All vehicles and wiring harnesses are different so it is possible that... view full answer...
It sounds like there could be one of two possible problems. First, it could be a ground issue. A weak ground can cause all sorts of issues. Make sure the ground for the converter is attached to a clean and corrosion free bare metal surface. If it already is, try moving the ground to a different location.
You will also want to check the trailer side connector and wiring. If there is corrosion build up on the trailer connector that could cause problems. Make sure to check the main ground... view full answer...
Installing this particular hitch on your Tribute should not be too difficult if you have average mechanical ability and access to a torque wrench. One of the connections on each side of the frame uses a weld nut, a nut that is welded into the interior of the frame member.
Since your vehicle has a few years on it, there is a good chance that there is some corrosion and road grime built up in the threads of the weld nut. You will need to spray a lubricant like WD-40 into the weld nuts and... view full answer...
You will want to connect the Vehicle Wiring Harness # 118343 to both taillight assemblies on your 2002 Mazda Tribute. The wiring harness needs signal from both taillights so the trailer's turn signals will function properly.
The 4-Pole connector provided by the 118343 harness will provide taillight, right turn/stop, and left turn/stop functions for your trailer.
I have attached a help article on trailer wiring for you. view full answer...
Go To Results